Bdsankey's latest activity
-
Thanks!!! -
It makes you wonder if there was oil, fuel or something in the exhaust from before that took a while to burn out. I have seen that with...
-
I'm thinking the same. When doing experiments with my FICM boards, if I had the injectors connected wrong or something in the...
-
Yeah, I wouldn’t be surprised at all if that was the case . Because before it completely won’t run, it ran terrible. I’m sure it got a...
-
I really appreciate all the info on here. Finally got my truck tuned today. And it drives awesome🤞🏽. Had some problems right after...
-
100% failure rate with them, I will only use the stock ones. I have never had to replace the factory radiator in any on my Dmax's but...
-
Bdsankey replied to the thread 03 LB7 Build.Keep us posted! Hopefully that's all it was.
-
@Bdsankey - I think adjusting the limit within the settings may have been the issue. I didn’t pull a log via the monitor, but on the...
-
Bdsankey replied to the thread LB7 (E54/AL5/FICM) J1939 messages.@kidturbo and Ben Tyler would have the most info on this.
-
Bdsankey replied to the thread 03 LB7 Build.Can you post the log? I’ll be honest, I’ve never seen this issue before. It sounds like it’s something to do with your Edge device...
-
Bdsankey replied to the thread Fuel rail pressure.It "could" work in theory but I don't know if it would in actuality. My OCD forces me to put them in the correct cylinders based upon...
-
Bdsankey replied to the thread Fuel rail pressure.Not really. I personally always match them to the cylinder meaning #1 on the flowsheet goes in cyl 1, #2 on the sheet goes to cyl 2, #3...
-
Bdsankey replied to the thread 03 LB7 Build.As far as I know there is not a way to scale the PID that is fed to it from the ECM directly on the CTS3. Does your log show desired...
-
Bdsankey replied to the thread Fuel rail pressure.See the above in bold from my reply but I would personally put the same injector code in for all of them. OEM output means just that...
-
Bdsankey replied to the thread Aluminum Radiators?.I have not had great luck with any aluminum radiator which is why all we install these days is Northern Radiator. They're the only OEM...
