Bdsankey's latest activity

  • Bdsankey
    Bdsankey replied to the thread Twins with Twins, Anyone?.
    I wish those bad boys were cheaper, and I charged you my cost! I love ARP but god damn are they expensive for 625s.
  • Bdsankey
    I agree with just about everyone, if you're happy I'd leave the truck alone. As others have said, I would have also put a new CP3 in...
  • Bdsankey
    Bdsankey replied to the thread LML Head Gasket.
    This is great advice! Also, when doing the HG job, it never hurts to do a water pump/thermostats and glow plugs.
  • Bdsankey
    Bdsankey reacted to 2004LB7's post in the thread LML Head Gasket with Like Like.
    Pull the heads and take a look before deciding on a used engine or not. Whatever use do, don't use the gold head gaskets A CP3...
  • Bdsankey
    Bdsankey reacted to kidturbo's post in the thread Twins with Twins, Anyone? with Like Like.
    Found one of the originals. Ya can spot where sprayed with copper originally as Brad suggested. If I find it's mate, will grab a new can...
  • Bdsankey
    Bdsankey reacted to WVRigrat05's post in the thread Fixing my LBZ/ truck build with Haha Haha.
    Dry pop and cross thread everything, it'll never come loose again
  • Bdsankey
    Bdsankey replied to the thread Twins with Twins, Anyone?.
    I've always used the steel OEM type from Mahle or GM. My only experiences with the graphite compression gaskets is they're a pain to...
  • Bdsankey
    Bdsankey replied to the thread C4 stack clearance.
    Your kit came from me and Goerend, you should have Torrington bearings. They’re in their own bag. Sent from my iPhone using Tapatalk
  • Bdsankey
    Bdsankey replied to the thread C4 stack clearance.
    You will end the C4 pack on a friction touching the top plate. The extra steel is for adjusting clearance. If it still is too tight let...
  • Bdsankey
    Bdsankey reacted to JoshH's post in the thread C4 stack clearance with Like Like.
    Did they perhaps send you an extra selective steel for the C4 that you're trying to add? You should have 6 frictions and 6 steel plates...
  • Bdsankey
    Bdsankey replied to the thread C4 stack clearance.
    You've already figured out the C1 as 2 frictions stuck together, that's very common in packaging. As for your C4, there is only one...
  • Bdsankey
    Bdsankey replied to the thread 300k on transmission fluid.
    OEM unit: Dex 3 or Dex 6 (based on year/OEM fill) or a TES-295 rated fluid (Transynd, AmsOil Torque Drive etc). I tend to see more...
  • Bdsankey
    Bdsankey replied to the thread 300k on transmission fluid.
    I 2nd changing the fluid. Leaving trans fluid alone that long is not wise in my opinion and something 99% or shops will also agree with...
  • Bdsankey
    Bdsankey replied to the thread McRats Wendy is up for sale....
    Only if you dress like Doofy.........................
    • 1782735609105.png
  • Bdsankey
    Bdsankey replied to the thread McRats Wendy is up for sale....
    I've been bugging him to bring that van out since the day I met him in 2019............. I guess I'll keep waiting :ROFLMAO::ROFLMAO: