Recent content by 16T
-
1
2016 Won't start
Yeah, I'm putting the tank back up tomorrow. So once I have everything installed again, I'll walk through the typical priming sequence and see what happens. -
1
2016 Won't start
When I had taken the line off late last week, no, the line was dry. -
1
2016 Won't start
Dropped the tank yesterday. Didn't find any blockage in the pickup, but I cleaned everything out and installed the new tube assembly. -
1
2016 Won't start
I'll keep that in mind. I have to drop the tank regardless, since I need to perform some pickup work in there anyway. In a way, the fact that this is a fuel issue is kind of a blessing because it makes me do something I needed to do regardless, but was putting off out of time constraints... -
1
2016 Won't start
Yeah, I'm probably going to end up dropping the tank tomorrow. -
1
2016 Won't start
Yeah, I pulled the hose off the output to the fuel line to the front of the truck and it was dry. Tried to cycle the pump, nothing ever came out. I'm not sure if it's a pump issue, or a pick-up/screen issue in the tank. I'm going to drop the tank tomorrow and start working through it. This... -
1
2016 Won't start
Yeah. I can crack the filter and fuels pours out, and I can hear the pump running. -
1
2016 Won't start
Update: I pulled the fuel filter off and visually inspected. No real signs of blockage. I did note that the contacts on the WIP looked rough, so I ordered one. While I wait on that part to put that back together, I walked backward to the lift pump. I have a pump that I can draw fuel into... -
1
2016 Won't start
I was sitting in a parking lot, idling. After a few min., it shut off instantly. I naturally tried to restart it, but it just tried and never did. That's where I cracked the suction side on the lift pump and fuel poured out. -
1
2016 Won't start
FASS Titanium. I dropped the suction side (typical priming of that scenario) and fuel came streaming down. -
1
2016 Won't start
Understood. Maybe my verbiage isn't correct. Essentially, when I turn the key to the run position, it tries to start as normal, but doesn't actually start. Just runs through the ignition cycle over and over. -
1
2016 Won't start
Yeah. It tries to turn over, but it just keeps cycling. Like I said, I cracked the bleeder and no matter how long I prime, nothing. There is fuel at the lift pump. If no one has ideas, I'll remove the feed line post lift, confirm fuel, then keep walking forward to the filter housing until I... -
1
2016 Won't start
Hey, not sure if this belongs in this section. Today I tried to start my 16' and it cranks, but won't turn over. I cracked the filter on the lift pump, and fuel came running out. I tried to walk through the fuse box, but I was in a parking lot, and couldn't really diagnose well with my...