16T's latest activity

  • 1
    16T replied to the thread 2016 Won't start.
    Yeah, I'm putting the tank back up tomorrow. So once I have everything installed again, I'll walk through the typical priming sequence...
  • 1
    16T replied to the thread 2016 Won't start.
    When I had taken the line off late last week, no, the line was dry.
  • 1
    16T replied to the thread 2016 Won't start.
    Dropped the tank yesterday. Didn't find any blockage in the pickup, but I cleaned everything out and installed the new tube assembly.
  • 1
    16T replied to the thread 2016 Won't start.
    I'll keep that in mind. I have to drop the tank regardless, since I need to perform some pickup work in there anyway. In a way, the...
  • 1
    16T replied to the thread 2016 Won't start.
    Yeah, I'm probably going to end up dropping the tank tomorrow.
  • 1
    16T replied to the thread 2016 Won't start.
    Yeah, I pulled the hose off the output to the fuel line to the front of the truck and it was dry. Tried to cycle the pump, nothing ever...
  • 1
    16T replied to the thread 2016 Won't start.
    Yeah. I can crack the filter and fuels pours out, and I can hear the pump running.
  • 1
    16T replied to the thread 2016 Won't start.
    Update: I pulled the fuel filter off and visually inspected. No real signs of blockage. I did note that the contacts on the WIP...
  • 1
    16T replied to the thread 2016 Won't start.
    I was sitting in a parking lot, idling. After a few min., it shut off instantly. I naturally tried to restart it, but it just tried and...
  • 1
    16T replied to the thread 2016 Won't start.
    FASS Titanium. I dropped the suction side (typical priming of that scenario) and fuel came streaming down.
  • 1
    16T replied to the thread 2016 Won't start.
    Understood. Maybe my verbiage isn't correct. Essentially, when I turn the key to the run position, it tries to start as normal, but...
  • 1
    16T replied to the thread 2016 Won't start.
    Yeah. It tries to turn over, but it just keeps cycling. Like I said, I cracked the bleeder and no matter how long I prime, nothing...
  • 1
    16T posted the thread 2016 Won't start in LML.
    Hey, not sure if this belongs in this section. Today I tried to start my 16' and it cranks, but won't turn over. I cracked the filter...
Show older items
Top Bottom