So I just replaced the front drive shaft ujoints on my 2001 GMC 2500HD Duramax 4X4. The t-case ujoint had already been replaced; the ujoint was held in with C clips. I quickly discovered that the front ujoint had no C clips. It wasnt until after I applied heat to the ujoint that I noticed the glue started coming out. So...stock GM ujoints are glued in; didn't know that. Heres the question: Are the glued in ujoints better?
Sent from my SCH-R760X using Tapatalk
Sent from my SCH-R760X using Tapatalk