EPC fooler

[Dm23]

Hey guys. I’m going to be installing the deviant 75450 epc fooler along with the new turbo and 10mm cp3 in 2 weeks. And I wanted to ask which solenoid the epc fooler plugs/ connects to. This is all new to me. So I’m asking for help. Epc fooler is just a safe guard until I can get my transmission built from mike L. Just need to save up the money.

I think it’s the top solenoid in the picture, any info would be great

https://www.pressreader.com/usa/diesel-world/20180601/282157881807916

Garrett

 

[Mike L.]

It is the top solenoid. Make sure you lube the o rings with light grease. Call me with any questions.

 

[gmc502]

does the tranny fluid run alittle hotter?

 

[Dm23]

Thanks Mike I appreciate it.

 

[Mike L.]

does the tranny fluid run alittle hotter?

Yes, but won't cause any problems.

 

[gmc502]

Yes, but won't cause any problems.

awesome,,I'll be looking into this mod.
another ??? can you put your springs in this valve body?

 

[Mike L.]

awesome,,I'll be looking into this mod.
another ??? can you put your springs in this valve body?

No. No Transgo either.

 

[Josh154]

I’ve been running this at 600hp for a few months running it hard and trans has been holding up great so far. No tc shutter or anything

 

[Mike L.]

I’ve been running this at 600hp for a few months running it hard and trans has been holding up great so far. No tc shutter or anything

It's comming.

 

[Dm23]

It’s only $59 for the part. And it’s just a little something in the mean time. More of a bandaid.

 

[Dm23]

Now mike, forgive my ignorance, but once the transmission is built, the epc fooler is obsolete? Or could it be used on an aftermarket transmission?

 

[Jacy_dzlguy]

I’ve been running this at 600hp for a few months running it hard and trans has been holding up great so far. No tc shutter or anything

:spit: my shudders with a 90 horse tune and tcm tune

 

[Mike L.]

Once the trans is built; any mod from the fooler to the dummy solenoid to the TCM pressure tune must be disabled. Pressure will skyrocket and do major damage.
I will not touch an LML, L5P without verifying a stock tune with my pressure gauge.

 

[PureHybrid]

It’s only $59 for the part. And it’s just a little something in the mean time. More of a bandaid.

DHD sells it for $49, and they're a vendor here

 

[Dm23]

Ok great, thanks for the info.


Shit lol, I already bought the epc fooler from throuogh bred diesel for $59

 

[Josh154]

It's comming.

Lol yes I know it will. Gonna have to talk the girl into a trip to Cali and your shop!