Went to the dirt drags at Boonsboro

[Nightlb7]

Got a chance to go to the dirt drags in Boonsboro md at the Washington county agricultural center last night, did really well and got 3rd place out of 60 trucks, lost to a twined lbz by a nose, it was a good time and the truck performed great can't wait to dirt drag again this was the first time I have done a dirt drag and I'm hooked! I kinda felt if I made the top 3 I should have got a chance to race the second place truck because the truck that beat me immediately raced the truck that got second and they marked me as 3rd. Am I wrong on this or is this typically how this goes? I'm not complaining at all just curious.


03 2500hd lb7, ccsb 4x4, built engine, fingers oval pistons, carrillos,3388af cam, s366, 60% injectors, twin fuelers, 4in straight piped, Big Dipper trans with Percision TC, Idaho rob tunes.

 

[zf>allison]

I've wanted to do dirt drag for a while looks fun. Not popular around here I guess

 

[onebaddmaxxx]

Coongrats Sean.

Glad i was able to be a part of the build and get you those injectors. Seems they work well. :thumb:

 

[Nightlb7]

Yeah me to just either didn't take my truck to the events before or would just say maybe next time but saw the page for this event and Iv been wanting to run this setup to see what it could do. Thanks Logan and yeah there doing a great job


03 2500hd lb7, ccsb 4x4, built engine, fingers oval pistons, carrillos,3388af cam, s366, 60% injectors, twin fuelers, 4in straight piped, Big Dipper trans with Percision TC, Idaho rob tunes.

 

[onebaddmaxxx]

Good deal. I Saw the videos on FB. Looked good man

 

[Nightlb7]

Thanks Yeah ran great couldn't ask for a better first time out running it, considering I had a full tool box and some extra crap in the bed and just running spring clamps I can't complain lol one guy there didn't have tie rod sleeves and folded the front wheels in really bad I feel it's to the point they should tech people and if you don't at least have sleeves you shouldn't be able to run and he had big wheels looked like 20's I don't know what people are thinking


03 2500hd lb7, ccsb 4x4, built engine, fingers oval pistons, carrillos,3388af cam, s366, 60% injectors, twin fuelers, 4in straight piped, Big Dipper trans with Percision TC, Idaho rob tunes.

 

[TowU4Free]

That's how they work man I was there my last run was a tie and some spectators said the announcers were trying to get me back but I didn't hear them.

 

[Nightlb7]

Ok I'm fine with it just curious and Dam that sucks you didn't get another run, after my last run I knew I lost but it was close the lady at the end told me to back down the track and run him again it was to close for them to tell "which I didn't think it was hard to tell"then I'm halfway backed down the track and the guy goes never mind just pull off


03 2500hd lb7, ccsb 4x4, built engine, fingers oval pistons, carrillos,3388af cam, s366, 60% injectors, twin fuelers, 4in straight piped, Big Dipper trans with Percision TC, Idaho rob tunes.

 

[TowU4Free]

Where were the videos?

 

[onebaddmaxxx]

Sean was tagged in a few on his fb that's all I seen

 

[Nightlb7]

Justin at confederate diesel told me he was going to post up videos


03 2500hd lb7, ccsb 4x4, built engine, fingers oval pistons, carrillos,3388af cam, s366, 60% injectors, twin fuelers, 4in straight piped, Big Dipper trans with Percision TC, Idaho rob tunes.

 

[Bustedknuckles]

Hey you aught to bring you truck to Antrim Diesels dyno day this saturday. Be nice to put a face to a forum name and talks trucks!

 

[TowU4Free]

I'm going to valley diesel days

 

[Nightlb7]

I would like to but gotta a bunch of things going on and I won't have time this weekend, Ima have to hit the rollers soon I want to see what it's putting down


03 2500hd lb7, ccsb 4x4, built engine, fingers oval pistons, carrillos,3388af cam, s366, 60% injectors, twin fuelers, 4in straight piped, Big Dipper trans with Percision TC, Idaho rob tunes.

 

[Bustedknuckles]

I would like to but gotta a bunch of things going on and I won't have time this weekend, Ima have to hit the rollers soon I want to see what it's putting down


03 2500hd lb7, ccsb 4x4, built engine, fingers oval pistons, carrillos,3388af cam, s366, 60% injectors, twin fuelers, 4in straight piped, Big Dipper trans with Percision TC, Idaho rob tunes.

Ok. I have a spot reserved I was gonna let you use as I'm sure the dyno is booked full by now.

 

[Nightlb7]

That's really cool of you I appreciate that I wish I could make it


03 2500hd lb7, ccsb 4x4, built engine, fingers oval pistons, carrillos,3388af cam, s366, 60% injectors, twin fuelers, 4in straight piped, Big Dipper trans with Percision TC, Idaho rob tunes.

 

[rg3whitelbz]

Knuckles I may go up to watch the dyno. Night when I lost in the semi finals last fall up there, I split the 3rd place payout with the other guy that lost in the semi finals.