Torsion Bar Indexing

[MaxFarmer]

Well, I screwed up again it seems. The last time I had the tranny out I neglected to mark where my T-bars were at. I thought I put the stocker keys in but I guess I put them in when I put the lift on so I in essence put the green keys in last time. Anyway, can anyone take a look and see how their bars are oriented by the horizontal (I assume) line that goes across the back of the bar? They have a L and R respectively with a rotational arrow, then a line, then 940 on the left and 960 on the right under the line. I did not know they are indexed a certain way before popping them out.
Thanks,

 

[McRat]

I took pictures of Blue, Left and Right.

Blue is a 3500SRW and T-Bars are all the way down.

There is tension on the Tbars even when all the way down, so I would think it would be the first hex past that.

 

[MaxFarmer]

Thanks a ton Pat! Yours are much cleaner than mine

 

[MaxFarmer]

Hmm...I see the lines and markings are not in the same position on each sides. I was hoping that they would be the same on both. Maybe that's where I messed up last time.