LBZ: S468 on lbz y bridge??

[lmmcbrown0917]

ok so were working on a customers truck that is doing a single 468 on a 7" pedestal is it possible to use a van style modded y bridge and custom cold side pipe? or would there be room to build something that would fit the stock bridge location?

the stock bridge would be welded up to keep the o-ring design from blowing out if its possible to use it.

who has done a single on these trucks without a install kit? pics would be awesome!

thanks in advanced.

 

[Ne-max]

With the 5 inch intake on the s400 your best bet is a lb7 style mouth piece. I tried a over alternater one from pro fab and it was a no go.

 

[jliddle]

LB7 style bridge and pipe is a must. Intake clearance will be a no go without one.

 

[Ne-max]

I ended up buying a cold side pipe and y bridge from hsp.

http://www.duramaxdiesels.com/forum/showthread.php?t=60434

 

[lmmcbrown0917]

I ended up buying a cold side pipe and y bridge from hsp.

http://www.duramaxdiesels.com/forum/showthread.php?t=60434

Thats probably what we will end up doing, do you remember how much your y bridge and cold side costed from hsp?

thanks

 

[Ne-max]

600ish if I remember right. Fit and looks great. Came with boots and clamps.