Is putting together a stock lb7.
How much valve guide clearance is new and how much is safe limit?.
I pushed valves just below deck, and measured 0.2mm on exhaust and 0.1mm on inlet.
Dont have tool too measure the guide.
Engine has run 240k km. Its was working good in truck it came from. Truck has had an accident.
How much valve guide clearance is new and how much is safe limit?.
I pushed valves just below deck, and measured 0.2mm on exhaust and 0.1mm on inlet.
Dont have tool too measure the guide.
Engine has run 240k km. Its was working good in truck it came from. Truck has had an accident.