Controller device mismatch

N2BRK

Well-known member
Dec 31, 2009
1,886
200
63
Is this error anything that I could have screwed up? It's your LML tuning for Crean.

Thanks,
Wally
 

clrussell

pro-procrastinator
Sep 23, 2013
5,903
358
83
Try flashing again.

Stock-tis file is full flash. Other is cal flash. Do not turn the key off if the first full flash fails. Try again.
 

N2BRK

Well-known member
Dec 31, 2009
1,886
200
63
Thanks. I got the tis flash no problem but the cal flash is giving me the above error. The only thing that I can figure at this point is a slight discrepancy in the controller number. The sticker on the ECM had one number, the locked tune has a zero in front of the number, and when I scanned the ECM it only had a zero after the number. Otherwise I'm stumped.
 

N2BRK

Well-known member
Dec 31, 2009
1,886
200
63
Turns out it was that controller number. Tony fixed it today and all is well. That's two local LML's I referred to him in a couple weeks and they are both happy with the tuning!