CNC Machined LB7 Mouthpieces in stock

[Brayden]

We've had these for a couple years, but here's a picture of one that was freshly cut on the CNC.

It features a smooth taper from the bore out to over 3.150" .

They are good for about 10hp depending on your setup.

 

[01 d-maxx]

what are they goin for?

 

[ynotracing2221]

what are they goin for?

X2

 

[Brayden]

75.00 exchange

 

[Brayden]

They're smoothed through the entire bore also.

 

[motoking_1990]

I found a hair pin hole in mine today it looks like it is in the weld! I live in terre haute, IN also wondering if you could take a look at the data log on my efi live and see what comes up how much do you charge?

 

[paint94979]

A leak pre turbo is not a "boost leak". It is just under vacuum it will not effect boost numbers FYI

 

[JoshH]

Maybe I'm not understanding what is done here, but I thought this was a stock mouthpiece that has been opened up with a CNC machine. I didn't think there were any welds on it.

 

[motoking_1990]

I didn't think it was a boost that's why I haven't fixed it. Prolly helps if anything lol and my mouthpiece is welded all the way around where it bolts to the Turbo.

 

[paul06d-max]

Maybe I'm not understanding what is done here, but I thought this was a stock mouthpiece that has been opened up with a CNC machine. I didn't think there were any welds on it.

correct...

 

[liftedon37s]

How do I order one of these, maybe I missed it online.