Info: Cat Part Numbers for Fass 150

[MAXX IT OUT]

What are the part numbers for running cat fuel filter on a fass 150. All I can find is the part number for an air dog, But I don't think they are the same....
I got my fass with filters and come to findout when i went to get part numbers off of them it has two fuel water separator on it, one is a Baldwin(BF1212) and one is a Wix(DFWS-3003). I found this, but it doesn't give me a cat fuel filter number and they only number I have is3T-8642, but that is a oil filter from what i gather.
http://www.fassride.com/tinymce/filemanager/files/HD%20Filter%20Chart2.pdf

 

[hondarider552]

What is the thread pitch of the base? I can look tomorrow when I get to work.

 

[02Dmaxdually]

1R-0750 should be the cat fuel filter, and 175-2949 for the w/s... I do believe

 

[MAXX IT OUT]

I believe it is a 13/16-16 thread for the fuel filter. Does the cat water separator need a fuel bowl or not, I think I would want to stay away from that

 

[hondarider552]

Cat doesn't make a water separator for the Airdogs, and I think the fass/airdog bases are the same, could be wrong though.

 

[02Dmaxdually]

disregard my last post. Both the filter numbers I gave you are a 1-14 thread. The cat fuel water separator (175-2949) has a drain but does not have a bowl.

 

[02Dmaxdually]

Need to verify thread size to confirm.

 

[MAXX IT OUT]

The water separator part number matchs with part number that fass gave, just need the fuel filter number.

 

[PhilsLB7]

Sub

 

[MAXX IT OUT]

Need to verify thread size to confirm.

Okay you were right, for a fass titanium 150 the thread is 1" 14. The pdf I posted is for the hd pumps, which the fuel filter thread is 1 1/2" and 1; 14 for the water separator.

 

[02Dmaxdually]

So it would take a 1r-0750 (ff) and a 175-2949 (ws):thumb:

 

[MAXX IT OUT]

So it would take a 1r-0750 (ff) and a 175-2949 (ws):thumb:

I just put a new set of filters on today with these numbers so they do work. It was like 16 bucks for the fuel filter and 22 bucks for the water separator at walk in prices. My truck is starting to have some color coordination issue.:roflmao: