Help: 2006 interior power seat swap?

[mriley]

I wasn't sure where to post this, but I have the opportunity to buy a full interior out of a loaded donor truck. Right now my truck has cloth seats, drivers side is power. New drivers seat is obviously power too, but it has the power lumbar buttons which I don't have. My question is with the harness, will I just be able to pull my power seat, and put in the new seat with no issues, all the functions working?

On a separate note, these new seats are heated too, It is a long shot but is there any way I could just swap the door panels out from the donor truck too and magically have heated seats?

 

[Lethal_diesel_lb7]

It should work the door you might have to wire what year is yours a 06 as well?


2003 LB7

EFI LIVE
CAT FUEL FILTER
5 inch flo~pro
Sitting on 33*12.5-44 ballistic 959/Atturos

 

[Lethal_diesel_lb7]

Just get the floor harness as well I’d gut the whole inside and sell what you don’t need


2003 LB7

EFI LIVE
CAT FUEL FILTER
5 inch flo~pro
Sitting on 33*12.5-44 ballistic 959/Atturos

 

[Lethal_diesel_lb7]

If our truck is a 03-06 just plug it in to the door module it will work. If I’m not mistaken


2003 LB7

EFI LIVE
CAT FUEL FILTER
5 inch flo~pro
Sitting on 33*12.5-44 ballistic 959/Atturos

 

[Dsmspickdad]

Correct plug n play.


Sent from my iPhone using Tapatalk

 

[TheBac]

You might have to have the door modules or possibly the BCM reprogrammed. But thats a relatively easy thing to have done if you end up needing to.

 

[mriley]

Awesome thanks for the info I will see if I can get it going. Thanks