Duramax Diesels Forum Truck of the Week
  #1  
Old 12-07-2018, 12:05 PM
Bdsankey Bdsankey is offline
Hotrodder

 
Join Date: Feb 2018
Location: Oshkosh, WI
Posts: 278

Default 3.42 IFS Gears

I am looking for a set of 3.42 gears for the front of my 2005. I've decided to run 3.42 and 3rd gear sled pulling to keep the thing streetable as well as being able to run a 1/4mi without running out of RPM at the strip.


PM or text 906-284-0962 if you have something.
__________________
Current Rides:
1) Toy: 2005 LLY ECSB, Leather, Sunroof
-820hp/1748ft-lbs @ Duramax Tuner (6/25/18)
-Built Motor, Billet S476/96/1.10 T6, Exergy 250% injectors w/ internal mods, Exergy 14mm street pump/stock cp3, Suncoast 10531 Converter, Limitless Competition Trans Kit, Fuelab low pressure fuel supply, Beans Sump, E-Locker, TrueTrac, Yukon 4340 Shafts, Traction Bars, DHD Center Link Brace, DHD Lower Crossmember Support


2) DD/Tow Rig: 2002 LB7 CCSB, Leather, Loaded
-Bosch Reman Injectors, LBZ CP3, FASS 150, RCD Sump, 3" JAMO Downpipe, 4" Downpipe Back w/ Muffler, Sleeves, DHD Centerlink Brace, DHD Lower Crossmember Support, Steering Wheel Radio Control Swap
Reply With Quote
  #2  
Old 12-07-2018, 12:43 PM
Nickracer9 Nickracer9 is online now
Hotrodder
 
Join Date: May 2012
Posts: 132
Default

I have a set, pm me a reasonable offer.
__________________
09 Lmm/Lml SoCal Diesel Stg3 engine. Danville performance 68stg2r/S483 tct, Exergy 150% over, Exergy 12mm, built billet tranny by Limitless diesel and me. Ecm/Tcm tuning by Danville performance. Hsp Triples S369sxe coming soon!
Reply With Quote
  #3  
Old 12-07-2018, 03:33 PM
Bdsankey Bdsankey is offline
Hotrodder

 
Join Date: Feb 2018
Location: Oshkosh, WI
Posts: 278

Default

Quote:
Originally Posted by Nickracer9 View Post
I have a set, pm me a reasonable offer.
PM sent!
__________________
Current Rides:
1) Toy: 2005 LLY ECSB, Leather, Sunroof
-820hp/1748ft-lbs @ Duramax Tuner (6/25/18)
-Built Motor, Billet S476/96/1.10 T6, Exergy 250% injectors w/ internal mods, Exergy 14mm street pump/stock cp3, Suncoast 10531 Converter, Limitless Competition Trans Kit, Fuelab low pressure fuel supply, Beans Sump, E-Locker, TrueTrac, Yukon 4340 Shafts, Traction Bars, DHD Center Link Brace, DHD Lower Crossmember Support


2) DD/Tow Rig: 2002 LB7 CCSB, Leather, Loaded
-Bosch Reman Injectors, LBZ CP3, FASS 150, RCD Sump, 3" JAMO Downpipe, 4" Downpipe Back w/ Muffler, Sleeves, DHD Centerlink Brace, DHD Lower Crossmember Support, Steering Wheel Radio Control Swap
Reply With Quote
  #4  
Old 12-07-2018, 04:04 PM
torqued2dmax's Avatar
torqued2dmax torqued2dmax is offline
Hotrodder
 
Join Date: Mar 2017
Location: Brookville, PA
Posts: 479
Default

Bdsanky , off subject a bit but a couple of us were wondering about in the real world use of your street 14 mm pump dose it shut off at around 3500 to 3800 , thanks !
__________________
05 CC/LB DRW LLY Allison
AFE Blade Runner,AFE Momentum CAI,DHD Big Air intake Y pipe, DHD fuel block,DHD pcv reroute,MBRP 4 inch exhaust,DHD 3 inch downpipe,BD driver's side manifold,DHD pass side up pipe,DHD 3 inch intercooler hot&cold pipes, ATI damper,Empire pin kit by Big Foot on & off road shop, FASS fuel system,5/8 inch pickup, FASS fuel filter delete, EFI live,V2 & lap top , 5 position switch 250 hp big tune, shimmed fprv by Crank it up , built SunCoast Allison 1078 converter aftermarket trany mount by Limitless Diesel,ARP head studs,grade C gaskets,tig-welded water pump,T stats by Blackout performance,MA t case brace , Kriptonite motor mounts,MA pump rub kit,HD drive shaft 1480joints by Greensburg machine,BDS Recoil traction bars, PPE finned deep pan , Mike L trany cooler, PSC pump, 5100s, Sulastic Shackles, Curt com 2.5 hitch
Reply With Quote
  #5  
Old Yesterday, 04:18 AM
Bdsankey Bdsankey is offline
Hotrodder

 
Join Date: Feb 2018
Location: Oshkosh, WI
Posts: 278

Default

Quote:
Originally Posted by torqued2dmax View Post
Bdsanky , off subject a bit but a couple of us were wondering about in the real world use of your street 14 mm pump dose it shut off at around 3500 to 3800 , thanks !
Well I may not be the best test subject. My Airdog 2 165 would drop pressure anytime I would lay into. Started at 10-12psi at idle then would drop to 1-2psi at WOT according to my crappy $3 gauge. With my old lift pump configuration it would cap out around 3200rpm before it would drop rail pressure. Iím only running 1550us on modded 250s right now.

That said, I know thereís more in it. Exergy claims with my injector flow sheet it should hold 1800-2000us before major drops occur. I will be making my own fuelab low pressure setup and run it on a boost referenced reg which should help volume. I also am going to put a stock LBZ pump on the belt feeding the passenger side rail.
__________________
Current Rides:
1) Toy: 2005 LLY ECSB, Leather, Sunroof
-820hp/1748ft-lbs @ Duramax Tuner (6/25/18)
-Built Motor, Billet S476/96/1.10 T6, Exergy 250% injectors w/ internal mods, Exergy 14mm street pump/stock cp3, Suncoast 10531 Converter, Limitless Competition Trans Kit, Fuelab low pressure fuel supply, Beans Sump, E-Locker, TrueTrac, Yukon 4340 Shafts, Traction Bars, DHD Center Link Brace, DHD Lower Crossmember Support


2) DD/Tow Rig: 2002 LB7 CCSB, Leather, Loaded
-Bosch Reman Injectors, LBZ CP3, FASS 150, RCD Sump, 3" JAMO Downpipe, 4" Downpipe Back w/ Muffler, Sleeves, DHD Centerlink Brace, DHD Lower Crossmember Support, Steering Wheel Radio Control Swap
Reply With Quote
  #6  
Old Yesterday, 04:29 PM
torqued2dmax's Avatar
torqued2dmax torqued2dmax is offline
Hotrodder
 
Join Date: Mar 2017
Location: Brookville, PA
Posts: 479
Default

Quote:
Originally Posted by Bdsankey View Post
Well I may not be the best test subject. My Airdog 2 165 would drop pressure anytime I would lay into. Started at 10-12psi at idle then would drop to 1-2psi at WOT according to my crappy $3 gauge. With my old lift pump configuration it would cap out around 3200rpm before it would drop rail pressure. Iím only running 1550us on modded 250s right now.

That said, I know thereís more in it. Exergy claims with my injector flow sheet it should hold 1800-2000us before major drops occur. I will be making my own fuelab low pressure setup and run it on a boost referenced reg which should help volume. I also am going to put a stock LBZ pump on the belt feeding the passenger side rail.
Sounds like when you get your low pressure side finished that will be the ticket ! Thanks for getting back to me and Good luck with new setup !
__________________
05 CC/LB DRW LLY Allison
AFE Blade Runner,AFE Momentum CAI,DHD Big Air intake Y pipe, DHD fuel block,DHD pcv reroute,MBRP 4 inch exhaust,DHD 3 inch downpipe,BD driver's side manifold,DHD pass side up pipe,DHD 3 inch intercooler hot&cold pipes, ATI damper,Empire pin kit by Big Foot on & off road shop, FASS fuel system,5/8 inch pickup, FASS fuel filter delete, EFI live,V2 & lap top , 5 position switch 250 hp big tune, shimmed fprv by Crank it up , built SunCoast Allison 1078 converter aftermarket trany mount by Limitless Diesel,ARP head studs,grade C gaskets,tig-welded water pump,T stats by Blackout performance,MA t case brace , Kriptonite motor mounts,MA pump rub kit,HD drive shaft 1480joints by Greensburg machine,BDS Recoil traction bars, PPE finned deep pan , Mike L trany cooler, PSC pump, 5100s, Sulastic Shackles, Curt com 2.5 hitch
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 03:41 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vB.Sponsors