|
|
|
#1
02-26-2019, 07:37 AM
|
||||
|
||||
Manifold/Up-Pipe/T6 Turbine Blankets
I ordered a t6 turbine blanket, manifold blankets, and up-pipe blankets from Levi and all I can say is the manufacturing quality is fantastic. I haven't gotten them onto the truck yet but they fit well just holding them in place. I've got some more work to do before they get final installation.
Levi offers great customer support as well!
__________________
Current Rides: 1) Toy: 2005 LLY ECSB, Leather, Sunroof -820hp/1748ft-lbs @ Duramax Tuner (6/25/18) - Old 475/87/1.00 setup -Built Motor, Forced Inductions Billet ETR 480/96/1.10 T6 w/V2 Race Cover, Modded Exergy 250% Injectors, Exergy 14mm Street Pump/LBZ CP3, Goerend Q Converter, Billet Trans, Fuelab Supply Pump/Reg, RCD Sump, Front E-Locker, TrueTrac, Yukon 4340 Rear Shafts, Traction Bars, DHD Center Link Brace, DHD Lower Crossmember Support  2) DD/Tow Rig: 2002 LB7 CCSB, Leather, Loaded -Bosch NEW Injectors, FASS 150, 3" Downpipe, 4" Downpipe Back, RCD Sump, PPE Sleeves, DHD Centerlink Brace, DHD Lower Crossmember Support, Steering Wheel Radio Control Swap 
|
|
#2
02-26-2019, 07:40 AM
|
||||
|
||||
|
I loved my blankets from Levi on my pull truck!
__________________
- ZAK 2011 CHEVY 2500HD CCSB Duramax/Allison LTZ 2005 CHEVY 2500HD RCLB 2WD Duramax/Allison 2002 GMC 2500HD RCLB Duramax/allison 2.6 puller  Special thanks to: - Danville performance, Mark. - Suncoast transmission's, Andrew. - Wehrli custom fab, Jason. - Profab, Rick - Turbo performance, Levi. - HSP, Joe and Dave. - SoCal diesel. - Wagler competition, Jeramy.
|
|
#3
02-26-2019, 10:31 AM
|
||||
|
||||
|
Quote:
__________________
Current Rides: 1) Toy: 2005 LLY ECSB, Leather, Sunroof -820hp/1748ft-lbs @ Duramax Tuner (6/25/18) - Old 475/87/1.00 setup -Built Motor, Forced Inductions Billet ETR 480/96/1.10 T6 w/V2 Race Cover, Modded Exergy 250% Injectors, Exergy 14mm Street Pump/LBZ CP3, Goerend Q Converter, Billet Trans, Fuelab Supply Pump/Reg, RCD Sump, Front E-Locker, TrueTrac, Yukon 4340 Rear Shafts, Traction Bars, DHD Center Link Brace, DHD Lower Crossmember Support 2) DD/Tow Rig: 2002 LB7 CCSB, Leather, Loaded -Bosch NEW Injectors, FASS 150, 3" Downpipe, 4" Downpipe Back, RCD Sump, PPE Sleeves, DHD Centerlink Brace, DHD Lower Crossmember Support, Steering Wheel Radio Control Swap
|
|
#4
02-26-2019, 03:48 PM
|
||||
|
||||
|
Quote:
|
|
#5
02-26-2019, 04:28 PM
|
||||
|
||||
|
Do these really help spool up?
__________________
16 CCSB LML - SDP cp3 conversion, exergy sportsman, SDP y bridge intake & intercooler pipes, 3” downpipe, 5” jamo exhaust, lb7 up pipe, fass titanium 165, deviant sump, epc fooler, UDT tuned 08 CCSB LMM - HSP 369sxe kit, 10mm S&S cp3, built trans with suncoast 1058, supporting mods and Danville tuned SOLD
|
|
#6
02-26-2019, 04:45 PM
|
||||
|
||||
|
Quote:
__________________
2008 GMC duramax crew cab short bed 2500. 10.98@124mph Thanks to Mike L, SoCal Diesel, and Abel Chevorlet. Tailgate Crew Member #1
|
|
#7
02-26-2019, 04:47 PM
|
||||
|
||||
|
Quote:
I've never used them but heard people saying they helped a lot, especially on big chargers.
__________________
Current Rides: 1) Toy: 2005 LLY ECSB, Leather, Sunroof -820hp/1748ft-lbs @ Duramax Tuner (6/25/18) - Old 475/87/1.00 setup -Built Motor, Forced Inductions Billet ETR 480/96/1.10 T6 w/V2 Race Cover, Modded Exergy 250% Injectors, Exergy 14mm Street Pump/LBZ CP3, Goerend Q Converter, Billet Trans, Fuelab Supply Pump/Reg, RCD Sump, Front E-Locker, TrueTrac, Yukon 4340 Rear Shafts, Traction Bars, DHD Center Link Brace, DHD Lower Crossmember Support 2) DD/Tow Rig: 2002 LB7 CCSB, Leather, Loaded -Bosch NEW Injectors, FASS 150, 3" Downpipe, 4" Downpipe Back, RCD Sump, PPE Sleeves, DHD Centerlink Brace, DHD Lower Crossmember Support, Steering Wheel Radio Control Swap
|
|
#8
02-26-2019, 07:36 PM
|
||||
|
||||
|
I ordered one for my S472sxe but went with a PTP Lava blanket.
__________________
2006 CCLB LT3 Victory Red SDP Built Trans w/ Goerend G billet stator S472sx-e .87/1.0ar w/ SDP Piping Wagler street intake Calvert Racing bars ADII 165 Full Kryptonite Front end PPE manifolds up pipes Special Thanks to:Scott@SDP Tuned by:Blake@UDT Best time to date: 12.08 @ 112.58 1.76 60ft
|
|
#9
02-27-2019, 08:25 AM
|
|||
|
|||
|
Nice guy and top quality product!
|
|
#10
05-09-2019, 08:02 AM
|
||||
|
||||
|
Here are some more pics. Got the up-pipe blankets on a few weeks back (4/27) and manifold blankets installed last weekend (5/4) and could not be happier. The up-pipe blankets go on a little tough but that is the nature of the space.
The manifold blankets took an honest 30 minutes total. Passenger side is super easy by yourself. The drivers side we raised it on the lift so someone could sit underneath the truck on a rolling chair while I stood on a step outside. This was just due to the fact I couldn't get my hands in by the bottom side of the manifold due to my new fuel line plumbing running across that open area (2x 5/8 ID lines, 1x 1/2" ID line, and a 3x 12ga harness).
__________________
Current Rides: 1) Toy: 2005 LLY ECSB, Leather, Sunroof -820hp/1748ft-lbs @ Duramax Tuner (6/25/18) - Old 475/87/1.00 setup -Built Motor, Forced Inductions Billet ETR 480/96/1.10 T6 w/V2 Race Cover, Modded Exergy 250% Injectors, Exergy 14mm Street Pump/LBZ CP3, Goerend Q Converter, Billet Trans, Fuelab Supply Pump/Reg, RCD Sump, Front E-Locker, TrueTrac, Yukon 4340 Rear Shafts, Traction Bars, DHD Center Link Brace, DHD Lower Crossmember Support 2) DD/Tow Rig: 2002 LB7 CCSB, Leather, Loaded -Bosch NEW Injectors, FASS 150, 3" Downpipe, 4" Downpipe Back, RCD Sump, PPE Sleeves, DHD Centerlink Brace, DHD Lower Crossmember Support, Steering Wheel Radio Control Swap
|
|
#11
05-09-2019, 10:33 AM
|
||||
|
||||
|
__________________
- ZAK 2011 CHEVY 2500HD CCSB Duramax/Allison LTZ 2005 CHEVY 2500HD RCLB 2WD Duramax/Allison 2002 GMC 2500HD RCLB Duramax/allison 2.6 puller Special thanks to: - Danville performance, Mark. - Suncoast transmission's, Andrew. - Wehrli custom fab, Jason. - Profab, Rick - Turbo performance, Levi. - HSP, Joe and Dave. - SoCal diesel. - Wagler competition, Jeramy.
|
|
#12
05-10-2019, 08:45 AM
|
||||
|
||||
|
Thanks guys! Always good to hear things are fitting and working like they should.
 Have a good weekend everyone!  :
__________________
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
