Duramax Diesels Forum Truck of the Week
  #6016  
Old 02-14-2019, 06:21 AM
kiwilml's Avatar
kiwilml kiwilml is offline
Hotrodder
 
Join Date: Nov 2015
Posts: 390
Default

No I don't have a sump, but it don't have any problem holding 9 or 10 psi under full throttle.. I think anyway I'll have to double check that today, I normally watch other gauges in them situations lol.. But I know it doesnt go below 4 psi because I have that gauge set to go red at that point and that is very noticeable..
__________________
2016 Chevy LML CCSB.. HSP compound turbo kit with a Stainless Diesel 5 blade S475 over stock. Exergy 10mm cp3 conversion and still on stock injectors and transmission. 5" flo-pro exhaust and then EZ Lynk tuning by PPEI. Also have a 3 pod pillar post with autometer boost,lift pump fuel pressure, and egt gauges.
Reply With Quote
  #6017  
Old 02-14-2019, 06:28 AM
Josh154's Avatar
Josh154 Josh154 is offline
Hotrodder
 
Join Date: Sep 2015
Location: Sioux Falls SD
Posts: 964
Default

You running air dog or fass? I know my fass came with a 1/2” draw tube and the only way to hook the fass up was to drop the tank and modify the sending unit with the 1/2” tube. Something with the 15+ change or something. I have a deviant sump with return and love it, was so simple installing fass
__________________
16 CCSB LML - SDP cp3 conversion, exergy sportsman, SDP y bridge intake & intercooler pipes, 3” downpipe, 5” jamo exhaust, lb7 up pipe, fass titanium 165, deviant sump, epc fooler, UDT tuned

08 CCSB LMM - HSP 369sxe kit, 10mm S&S cp3, built trans with suncoast 1058, supporting mods and Danville tuned
SOLD
Reply With Quote
  #6018  
Old 02-15-2019, 07:59 AM
Dozerboy's Avatar
Dozerboy Dozerboy is offline
Hotrodder
 
Join Date: Jun 2009
Location: TX of course
Posts: 3,855

Default

I was told the pickup on the LMLs was very restricted. If you don’t do a sump the pump will make a bunch more noise and not make full power.


Sent from my iPhone using Tapatalk
__________________

06 GMC 2500 CCSB SLT LBZ 4X4





These views expressed on this post are not my own, but rather randomly generated computer gibberish, and in no way should be used to judge the author's IQ or mental health.
Reply With Quote
  #6019  
Old 02-15-2019, 10:03 AM
Josh154's Avatar
Josh154 Josh154 is offline
Hotrodder
 
Join Date: Sep 2015
Location: Sioux Falls SD
Posts: 964
Default

Yeah I think that’s why fass doesn’t even come with a hookup for the factory pickup on the lml’s
__________________
16 CCSB LML - SDP cp3 conversion, exergy sportsman, SDP y bridge intake & intercooler pipes, 3” downpipe, 5” jamo exhaust, lb7 up pipe, fass titanium 165, deviant sump, epc fooler, UDT tuned

08 CCSB LMM - HSP 369sxe kit, 10mm S&S cp3, built trans with suncoast 1058, supporting mods and Danville tuned
SOLD
Reply With Quote
  #6020  
Old 02-26-2019, 11:48 PM
snowman22's Avatar
snowman22 snowman22 is online now
Hotrodder
 
Join Date: Jan 2018
Location: SoCal
Posts: 133
Default

The fires in CA did a number on a new air filter. That has probably less than 3k miles on it and I never spent any major time up close. It makes me wonder what they do to help give an actual fire engine a chance to survive.




Sent from my iPhone using Tapatalk
__________________
2015.5 LML GMC Denali 3500 SRW 4wd CCLB 95k Miles
Mike L Trans, 4" FlowPro, MBRP Down Pipe, 30" FTE Resonator, S&B Intake, Twin Kennedy Pumps, Bilstein 5100, Poly U/LCA Bushings, Kryptonite Tie Rods, EBC Sport Rotors Yellow Pads, Edge CTS2
Reply With Quote
  #6021  
Old 03-06-2019, 03:10 PM
Kamilmk's Avatar
Kamilmk Kamilmk is offline
Hotrodder
 
Join Date: Aug 2015
Location: Seymour, CT
Posts: 386
Default

Oh you know...



Getting ready to pull motor. And off it goes to a machine shop. Bent rods. Possibly cracked pistons.


Sent from my iPhone using Tapatalk
__________________
Kamil

04 LB7 CCLB SLT

EFI Live.
PPE boost increase valve.
EGR delete.
Federal "shorty" y bridge.
Profab high flow intake horn.
Wetzel billet compressor wheel.
5" MagnaFlow straight exhaust to 6" aFe tip. Factory exit.
Van thermostat housing.
2" DJM drop shackles.
PPE silicone hoses.
5" RPI custom aluminum intake. S&B filter.


Before:
03 LB7 CCSB LT. (Sold)
Reply With Quote
  #6022  
Old 03-07-2019, 10:56 PM
NC-smokinlmm's Avatar
NC-smokinlmm NC-smokinlmm is offline
<<<Future tuna killer
 
Join Date: May 2011
Location: At Da Beach
Posts: 4,220
Default

Someone had some fun...
__________________
2010 GMC 1500 RCSB Denali Clone < lifted 22's/33's/ Kooks / Magnaflow / 5.3 / 6l80E / TVS1900 @ 14#'s / BTR Top End / Boosted Bump Stick / Trunion upgrade / 90mm / 10% over / 2.8 griptec / 105 lb ID's / Mayhem built/tuned.

2016 LML CCSB Denali < Lifted 22's/35's, Fox 2.0 < I officially need help.
Reply With Quote
  #6023  
Old 03-08-2019, 08:47 AM
BoiseRob's Avatar
BoiseRob BoiseRob is offline
Hotrodder
 
Join Date: Oct 2007
Posts: 283

Default

Yesterday had a new Fleece 63mm "Street" turbo & Deviant Y-bridge installed...
Reply With Quote
  #6024  
Old 03-12-2019, 03:46 PM
lts1ow's Avatar
lts1ow lts1ow is offline
Needs moar PAH!
 
Join Date: May 2012
Location: NJ
Posts: 1,589
Default

Changed ATF spin on filter and changed ATF with fancy transynd

Damn old fluid was still red, pampered truck
__________________
2005 LLY: AFE Bladerunner, MBRP downpipe, sewer pipe exhaust, PPE tuner, !EGR

1995 Z28: 76mm, 383ci LTwon, 80e 660hp/750ft-lb 10.2@140

2014 CTD Stock
Reply With Quote
  #6025  
Old 03-12-2019, 06:07 PM
minerigger's Avatar
minerigger minerigger is offline
Hotrodder
 
Join Date: Dec 2013
Location: Casper, WY
Posts: 2,629
Default

Heard that. Mine is getting an oil change in a few weeks and only has 1200 miles on the oil but is 18-19 months old and sits a lot.


Sent from my iPhone using Tapatalk
__________________
Brock

06 LBZ ECLB

Gauges, Danville Tunes, 5" Dumped, Trans by Evan, DP Stg2r, Sleeved/Braced and some other odds and ends crap that we all have
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -7. The time now is 02:09 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vB.Sponsors