Duramax Diesels Forum Truck of the Week
  #16  
Old 01-23-2016, 10:11 AM
Harbin_22's Avatar
Harbin_22 Harbin_22 is offline
Turning it back up!
 
Join Date: Dec 2010
Location: Southern Indiana
Posts: 3,813

Default

These are really nice pieces. I was so excited to get mine just for ease of working on it. It is one of the nicest looking things in the truck and you can barley see it
__________________
10' CCSB
Carrillos, Fingers 16.5:1 Cast Pistons, 3388AF Cam, PPE Dual CP3's, Exergy 200% inj, Danvile Billet 72R, HSP tripples/2-SXE369's, Limitless Diesel All Billet Comp Trans with LD TC, DHD lock up, Air Dog, Banks, RDL, CalTracs, QA1, M/A, Isspro, Novakanes/420's, 30x14 cheaters
Tuning from Mark@Danville

1,101HP/1727ftlbs
6.56@111 1/8
10.12@138 1/4
Reply With Quote
  #17  
Old 01-23-2016, 10:13 AM
Harbin_22's Avatar
Harbin_22 Harbin_22 is offline
Turning it back up!
 
Join Date: Dec 2010
Location: Southern Indiana
Posts: 3,813

Default

Damn I just realized that it is all one piece now, that is nice looking. Mine is the welded together version.
__________________
10' CCSB
Carrillos, Fingers 16.5:1 Cast Pistons, 3388AF Cam, PPE Dual CP3's, Exergy 200% inj, Danvile Billet 72R, HSP tripples/2-SXE369's, Limitless Diesel All Billet Comp Trans with LD TC, DHD lock up, Air Dog, Banks, RDL, CalTracs, QA1, M/A, Isspro, Novakanes/420's, 30x14 cheaters
Tuning from Mark@Danville

1,101HP/1727ftlbs
6.56@111 1/8
10.12@138 1/4
Reply With Quote
  #18  
Old 01-23-2016, 10:50 AM
prostreeter600's Avatar
prostreeter600 prostreeter600 is offline
Street rodder
 
Join Date: Jul 2010
Location: Dallas Tx
Posts: 708

Default

Out of curiousity , how much is that beauty ?
__________________
06! GMC Sierra RC Full built motor, carillos, 14/1 Arias W/total seal rings, 9100 AF, SCalTit retainers,SCalsprings,ported heads, SCal pushrods, ARP 625 head studs, O-ringed block, keyed oil pump ,Billet Aluminum Lifters, Harland Sharp Aluminum roller rockers, studded rocker shafts, studded & girdled mains, socal balancer, socal flywheel, PPE Dual Fuelers with twin Fleece 10 mm CP3s , FASS Titanium 260 , 3" bridge, , TrRIPLES----2---S369SXEs .88ARs over a Hybrid GTX 4202R--72mm/87mm 1.0 AR ,coilovers at 4 corners, 36" ladder bars, BD cooler, Exergys w/185% MS 8 hole nozzles ,FF Dynamics fans, PPE mans & ups , MA mounts & TC Brace ,NOS, Full Billet Trans, Suncoast 10531-3D , 3.42 Gears, BT lockup box, 18x9 Raceline Assualts Hooiser Drag Radials 325/45/18s . TUNED by MARK@DANVILLE. Engine by Jason Walker San Marcus Tx Best 60'---1.44. Best 1/8---6.39@105.92. Best 1/4---9.978@136.39
Reply With Quote
  #19  
Old 01-23-2016, 11:11 AM
Hot COCOAL Hot COCOAL is offline
May the farce be with you
 
Join Date: Jun 2012
Posts: 4,435

Default

Quote:
Originally Posted by prostreeter600 View Post
Out of curiousity , how much is that beauty ?
Take your pick
Arm
Or
Leg....
__________________
Jason-
Founding member of the "knows enough to be dangerous" club...
Hey, I'm NORWEGIAN... you try having a SQUARE head full of ROUND thoughts...
Reply With Quote
  #20  
Old 01-23-2016, 11:13 AM
JeremyDon88's Avatar
JeremyDon88 JeremyDon88 is offline
Hotrodder
 
Join Date: Feb 2012
Posts: 296
Default

Nice piece....
__________________
DD 2016 wt stock for now.

Sold!! DD 2006 Cc 4wd stock for now but FASS lift pump with straight pipe n hyper junk programmer ....

SOLD!!!!!!!Drag truck 2007 rc/sb LBZ stock motor
Everything deleted efi live tuned by PPEI!!!
Calvin's built Trans w/1058 cv and BTlock box. FASS 150 LP race valve... Electric fans and custom hot n cold pipes...
LB7 02
LLY 06
LBZ two 06's
LBZ 07
LMM 08
LML 16
Sold....Work truck 06 Chevy cc/dually stock everything!!!!!

Farm truck 95 Chevy ec/lb 6.5 turbo baby!! Lol

Sold.... 2008 CC Swb 4wd... Deleted with RDL egr delete
Air dog 165,Efi live,4 in flo pro duals with 6in tips.....

Sold 06 CC Swb 4wd Efi live from ATP,egr delete with RDL delete pipe n down pipe,45% injectors,4in exhaust
Air Dog 165, built Trans, fastest pass 60ft 1.8 et 8.4....

Race truck Fastest pass 1/8 mile 7.6 60ft 1.6 @88mph
Only 1/8 mile strips close to where I live!
Reply With Quote
  #21  
Old 01-23-2016, 11:31 AM
IOWA LLY's Avatar
IOWA LLY IOWA LLY is offline
Yes, its really me
 
Join Date: Feb 2007
Posts: 2,267
Default

Does anyone know if the hsp bridge will fit with the Pro-fab over the alternator tube? It looks similar but obviously without having both pieces in front of you it's probably impossible to know.

My twin setup is really close now.



Sent from my SM-N920V using Tapatalk
__________________
2003 GMC CCSB LLY
Built by me, tuned by me.

2009 ECI Diesel Truck Points Champion
2010 ECI Diesel Truck Points Champion
2011 ECI Diesel Truck Points Champion
2012 ECI Diesel Truck Points Champion

Big thanks to everyone who helps me.

Best 1/8th, 7.29, 98.6MPH (Street tires, fuel only, single Journal bearing GT42 charger) (2010)

Best 1/8th, 6.93, 104.24MPH (Street tires, fuel only, single HX60 turbo) (2016)

Best 1/8th, 6.60, 106.6MPH (Street tires, fuel only, single HX60 turbo) (2017)
Reply With Quote
  #22  
Old 01-23-2016, 11:41 AM
Harbin_22's Avatar
Harbin_22 Harbin_22 is offline
Turning it back up!
 
Join Date: Dec 2010
Location: Southern Indiana
Posts: 3,813

Default

Quote:
Originally Posted by IOWA LLY View Post
Does anyone know if the hsp bridge will fit with the Pro-fab over the alternator tube? It looks similar but obviously without having both pieces in front of you it's probably impossible to know.

My twin setup is really close now.



Sent from my SM-N920V using Tapatalk
I think the RDL bridge is shorter. I had one before the HSP bridge.
__________________
10' CCSB
Carrillos, Fingers 16.5:1 Cast Pistons, 3388AF Cam, PPE Dual CP3's, Exergy 200% inj, Danvile Billet 72R, HSP tripples/2-SXE369's, Limitless Diesel All Billet Comp Trans with LD TC, DHD lock up, Air Dog, Banks, RDL, CalTracs, QA1, M/A, Isspro, Novakanes/420's, 30x14 cheaters
Tuning from Mark@Danville

1,101HP/1727ftlbs
6.56@111 1/8
10.12@138 1/4
Reply With Quote
  #23  
Old 01-23-2016, 11:57 AM
duramaxzak's Avatar
duramaxzak duramaxzak is offline
Wanna be puller!
 
Join Date: Nov 2008
Location: Minnesota
Posts: 2,045
Default

Quote:
Originally Posted by prostreeter600 View Post
Out of curiousity , how much is that beauty ?
I think there $660 for the bridge and intercooler pipe.
__________________
- ZAK

2011 CHEVY 2500HD CCSB Duramax/Allison LTZ

2005 CHEVY 2500HD RCLB 2WD Duramax/Allison

2002 GMC 2500HD RCLB Duramax/allison 2.6 puller
Special thanks to:
- Danville performance, Mark.
- Suncoast transmission's, Andrew.
- Wehrli custom fab, Jason.
- Profab, Rick
- Turbo performance, Levi.
- HSP, Joe and Dave.
- SoCal diesel.
- Wagler competition, Jeramy.
Reply With Quote
  #24  
Old 01-23-2016, 11:59 AM
prostreeter600's Avatar
prostreeter600 prostreeter600 is offline
Street rodder
 
Join Date: Jul 2010
Location: Dallas Tx
Posts: 708

Default

At least it's not an arm AND a leg.
__________________
06! GMC Sierra RC Full built motor, carillos, 14/1 Arias W/total seal rings, 9100 AF, SCalTit retainers,SCalsprings,ported heads, SCal pushrods, ARP 625 head studs, O-ringed block, keyed oil pump ,Billet Aluminum Lifters, Harland Sharp Aluminum roller rockers, studded rocker shafts, studded & girdled mains, socal balancer, socal flywheel, PPE Dual Fuelers with twin Fleece 10 mm CP3s , FASS Titanium 260 , 3" bridge, , TrRIPLES----2---S369SXEs .88ARs over a Hybrid GTX 4202R--72mm/87mm 1.0 AR ,coilovers at 4 corners, 36" ladder bars, BD cooler, Exergys w/185% MS 8 hole nozzles ,FF Dynamics fans, PPE mans & ups , MA mounts & TC Brace ,NOS, Full Billet Trans, Suncoast 10531-3D , 3.42 Gears, BT lockup box, 18x9 Raceline Assualts Hooiser Drag Radials 325/45/18s . TUNED by MARK@DANVILLE. Engine by Jason Walker San Marcus Tx Best 60'---1.44. Best 1/8---6.39@105.92. Best 1/4---9.978@136.39
Reply With Quote
  #25  
Old 01-23-2016, 12:02 PM
jliddle's Avatar
jliddle jliddle is offline
Hotrodder
 
Join Date: Jun 2012
Location: NC
Posts: 331
Default

Wish the inlet was on top for the big single lbz guys
__________________
Reply With Quote
  #26  
Old 01-23-2016, 12:09 PM
IOWA LLY's Avatar
IOWA LLY IOWA LLY is offline
Yes, its really me
 
Join Date: Feb 2007
Posts: 2,267
Default

Quote:
Originally Posted by Harbin_22 View Post
I think the RDL bridge is shorter. I had one before the HSP bridge.
That would actually work fine then. I could just cut the pro-fab tube down a bit then and put a new bead roll on it. Provided the angle is the same. But knowing how tight everything is in there I wouldn't think it could be much different at all.

Sent from my SM-N920V using Tapatalk
__________________
2003 GMC CCSB LLY
Built by me, tuned by me.

2009 ECI Diesel Truck Points Champion
2010 ECI Diesel Truck Points Champion
2011 ECI Diesel Truck Points Champion
2012 ECI Diesel Truck Points Champion

Big thanks to everyone who helps me.

Best 1/8th, 7.29, 98.6MPH (Street tires, fuel only, single Journal bearing GT42 charger) (2010)

Best 1/8th, 6.93, 104.24MPH (Street tires, fuel only, single HX60 turbo) (2016)

Best 1/8th, 6.60, 106.6MPH (Street tires, fuel only, single HX60 turbo) (2017)
Reply With Quote
  #27  
Old 01-23-2016, 12:36 PM
DaveB's Avatar
DaveB DaveB is offline
Hotrodder
 
Join Date: Sep 2009
Location: Northeast Indiana
Posts: 409
Default

Quote:
Originally Posted by prostreeter600 View Post
Out of curiousity , how much is that beauty ?
The bridge setup as Josh posted is $450. It's the same price as the fabricated bridges used to be. With a cold side it is $660, or $725 powder coated for the entire setup.

We do have a setup for the single kit guys as well. It comes out the side like an LB7.
Reply With Quote
  #28  
Old 01-23-2016, 02:23 PM
jliddle's Avatar
jliddle jliddle is offline
Hotrodder
 
Join Date: Jun 2012
Location: NC
Posts: 331
Default

Quote:
Originally Posted by DaveB View Post

We do have a setup for the single kit guys as well. It comes out the side like an LB7.
Will the billet center section?
__________________
Reply With Quote
  #29  
Old 01-23-2016, 03:02 PM
Antsdmax Antsdmax is offline
Ameture Guy
 
Join Date: Jan 2016
Posts: 42
Default

Hi is there any advantag to this y bridge power wise. i have a welded lly setup that is welded on the outside and then fully ported on the inside. will this be of advantage to me i have mine out at the moment and thought i may change it
Reply With Quote
  #30  
Old 01-23-2016, 04:08 PM
mike diesel's Avatar
mike diesel mike diesel is offline
I'm alright.

 
Join Date: Sep 2012
Location: SLC, Utah
Posts: 4,005

Default

Quote:
Originally Posted by andy-stevenson View Post
You get what you pay for
Yea....sometimes.
__________________
'89 s10 daily driver
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 05:39 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vB.Sponsors