Duramax Diesels Forum Truck of the Week
  #61  
Old 12-22-2018, 01:34 PM
jpowel29's Avatar
jpowel29 jpowel29 is offline
Hotrodder
 
Join Date: Feb 2008
Location: Bentonville, Arkansas
Posts: 691
Default

Mahle pistons and wrist pins have been fully cryo treated (12/22 - price has been adjusted to reflect that). I will be sending the forged pistons off to be hard anodized if they don't sell by spring (to use them in a my motor refresh).

Still available:
LLY valve covers, intake runners, y bridge, front/rear engine covers - cleaned, blasted, and painted w/ VHT Black Pearl
LBZ Cam - $50
LBZ 3pc Flexplate assembly - $65
LBZ Fuel Rails, Rail Pressure Sensor, and Hardlines - $375
Set of 8 New LBZ Injector pigtails - $225
Lower Oil Pan with level sensor - $50
Upper oil pan - had some minor weld repairs on damaged bolt holes - $50
Welded Water Pump and Housing - $125
Used set of 7 Mahle Race Cast .020" over pistons/rings/pins - $800
AC/Alternator Accessory Bracket(s) - have both black powder coated and satin finish sets - $85
New in the box - Clevite HX Connecting Rod Bearings for Duramax engines - X series bearing has an additional .001" of oil clearance
Good used set of Mahle forged .020" over pistons for the Duramax stroker - 16.5:1 compression
Piston uses stock length connecting rods and .250" longer stroke crankshaft (or can be ran with stock stroke and .125" longer rods)
__________________
Trying some new things...
Reply With Quote
  #62  
Old 01-18-2019, 04:22 AM
jpowel29's Avatar
jpowel29 jpowel29 is offline
Hotrodder
 
Join Date: Feb 2008
Location: Bentonville, Arkansas
Posts: 691
Default

ttt
__________________
Trying some new things...
Reply With Quote
  #63  
Old 02-11-2019, 04:02 AM
jpowel29's Avatar
jpowel29 jpowel29 is offline
Hotrodder
 
Join Date: Feb 2008
Location: Bentonville, Arkansas
Posts: 691
Default

Still available:
LLY valve covers, intake runners, y bridge, front/rear engine covers - cleaned, blasted, and painted w/ VHT Black Pearl
LBZ Cam - $50
LBZ 3pc Flexplate assembly - $65
LBZ Fuel Rails, Rail Pressure Sensor, and Hardlines - $375
Set of 8 New LBZ Injector pigtails - $225
Lower Oil Pan with level sensor - $50
Upper oil pan - had some minor weld repairs on damaged bolt holes - $50
Welded Water Pump and Housing - $125
Used set of 7 Mahle Race Cast .020" over pistons/rings/pins - $800
AC/Alternator Accessory Bracket(s) - have both black powder coated and satin finish sets - $85
New in the box - Clevite HX Connecting Rod Bearings for Duramax engines - X series bearing has an additional .001" of oil clearance
Good used set of Mahle forged .020" over pistons for the Duramax stroker - 16.5:1 compression
Piston uses stock length connecting rods and .250" longer stroke crankshaft (or can be ran with stock stroke and .125" longer rods)
__________________
__________________
Trying some new things...
Reply With Quote
  #64  
Old 03-09-2019, 03:36 PM
jpowel29's Avatar
jpowel29 jpowel29 is offline
Hotrodder
 
Join Date: Feb 2008
Location: Bentonville, Arkansas
Posts: 691
Default

bump
__________________
Trying some new things...
Reply With Quote
  #65  
Old 04-01-2019, 09:38 AM
jpowel29's Avatar
jpowel29 jpowel29 is offline
Hotrodder
 
Join Date: Feb 2008
Location: Bentonville, Arkansas
Posts: 691
Default

Updated List:

LLY valve covers, intake runners, y bridge, front/rear engine covers - cleaned, blasted, and painted w/ VHT Black Pearl - $450
LBZ 3pc Flexplate assembly - $40
LBZ Fuel Rails and Hardlines - $300
Set of 8 New LBZ Injector pigtails - $200
Lower Oil Pan with level sensor - $50
Upper oil pan - had some minor weld repairs on damaged bolt holes - $50
Used set of 7 Mahle Race Cast .020" over pistons/rings/pins - $550
AC/Alternator Accessory Bracket(s) - have both black powder coated - $75
New in the box - Clevite HX Connecting Rod Bearings for Duramax engines - X series bearing has an additional .001" of oil clearance -$175
Good used set of Mahle forged .020" over pistons for the Duramax stroker - 16.5:1 compression. Recently Cryo Treated. Piston uses stock length connecting rods and .250" longer stroke crankshaft (or can be ran with stock stroke and .125" longer rods) -$550
__________________
Trying some new things...
Reply With Quote
  #66  
Old 04-04-2019, 06:20 AM
ikeG's Avatar
ikeG ikeG is online now
Oughta Know Better
 
Join Date: Apr 2011
Location: Western PA
Posts: 1,942

Default

Any stock lb7/lly rods? I need 1.

Sent from my SM-G960U using Tapatalk
__________________
Isaac Griffith, formerly 04jimc
03 Chev CC SB ZF6-Gone
04 GMC CC SB SLT LLY
597/1096 Batmostocker-Gone

06 GMC CC DRW-Gone
08 GMC CC DRW-Gone
New DD/Beater: Beat up 06 GMC CCSB w/ 252,000 miles
Current Tow Rig-12 Ram 4500 Crew


'Oughta K
now Better'- PPL Lim Pro Stock 05 3500 Crew Cab 158" WB 2014 PPP 2.6 Champions
Thanks to Blackout Performance

Reply With Quote
  #67  
Old 04-04-2019, 09:51 AM
jpowel29's Avatar
jpowel29 jpowel29 is offline
Hotrodder
 
Join Date: Feb 2008
Location: Bentonville, Arkansas
Posts: 691
Default

No sir.
__________________
Trying some new things...
Reply With Quote
  #68  
Old Yesterday, 04:47 PM
jpowel29's Avatar
jpowel29 jpowel29 is offline
Hotrodder
 
Join Date: Feb 2008
Location: Bentonville, Arkansas
Posts: 691
Default

HX Rod Bearings are sold. Updated listing below:

LLY valve covers, intake runners, y bridge, front/rear engine covers - cleaned, blasted, and painted w/ VHT Black Pearl - $450
LLY Reluctor Wheel and Drive Gear
LLY Cam Drive Gear
LBZ 3pc Flexplate assembly - $40
LBZ Fuel Rails and Hardlines - $300
Set of 8 New LBZ Injector pigtails - $200
Lower Oil Pan with level sensor - $50
Upper oil pan - had some minor weld repairs on damaged bolt holes - $50
Used set of 7 Mahle Race Cast .020" over pistons/rings/pins - $550
AC/Alternator Accessory Bracket(s) - have both black powder coated - $75
Good used set of Mahle forged .020" over pistons for the Duramax stroker - 16.5:1 compression. Recently Cryo Treated. Piston uses stock length connecting rods and .250" longer stroke crankshaft (or can be ran with stock stroke and .125" longer rods) -$550
__________________
__________________
Trying some new things...
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 05:59 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vB.Sponsors