![]() |
#916
|
||||
|
||||
![]()
Throttle on brother. Lol
__________________
Joe 2008 CCLB LT2 DURAMAX LMM 13.44 @ 98.69 456HP 925 TQ |
#917
|
||||
|
||||
![]()
Could the trans be creating too much heat and over powering the radiator? If your oil is staying cool something else has to be effecting the coolant.
__________________
2008 GMC duramax crew cab short bed 2500. 10.98@124mph Thanks to Mike L, SoCal Diesel, and Abel Chevorlet. Tailgate Crew Member #1 |
#918
|
||||
|
||||
![]()
Since mikes cooler, i have not seen over 210 on the trans. that use to get up to 230-240 with coolant but i would be running 240* on coolant at every hill. Its very very slow to rise in temp.
__________________
James 02 LB7, LLY, LBZ, LMM, LML, L5P 2500HD CC/LB dmax/alli "The Limo" BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me. ![]() best time to date: 12.39 motor died/bent rods = 3/11/11 back from the dead 7:04pm 4/9/2012 Limo is back in the garage, now driving a built chevy tracker ![]() Tailgate Crew Member #4 |
#919
|
||||
|
||||
![]()
I’d be curious to see what the temps are coming in before the radiator
__________________
2008 GMC duramax crew cab short bed 2500. 10.98@124mph Thanks to Mike L, SoCal Diesel, and Abel Chevorlet. Tailgate Crew Member #1 |
#920
|
||||
|
||||
![]()
I'm in the same boat as you I don't like slowing down
__________________
Adam mispeeling wrods n a thraed nere u 07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live 478k broke block ![]() 99 FL60 8.3 12v 13sp ![]() Quote:
|
#921
|
||||
|
||||
![]() Quote:
I don’t know, I’d be curious. The stock sensor is prone to heat soak too. The heat exchanger in my radiator is suppose to be much better than stock as well so maybe? It’s a terrible thing lmao
__________________
James 02 LB7, LLY, LBZ, LMM, LML, L5P 2500HD CC/LB dmax/alli "The Limo" BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me. ![]() best time to date: 12.39 motor died/bent rods = 3/11/11 back from the dead 7:04pm 4/9/2012 Limo is back in the garage, now driving a built chevy tracker ![]() Tailgate Crew Member #4 |
#922
|
||||
|
||||
![]()
Got a pair of frame brackets from 1Fastbrick (thank you sir!) and ill be picking up a stock bumper and all the stuff i need from it hopefully wednesday. probably wont get any of this stuff install for a month or two but atleast ill have it. aux radiator has to be built anyhow and im waiting on joe to get back in town to order it. hes adding provisions for the oil cooler to attach to the front of the aux cooler. i have not decided if i want to run it on the front of the aux cooler as it will induce more heat so i may try running it off to the side and on the front to see if it makes a difference. wanted to try to do all this before the heat went away but with my schedule, its not looking like it.
__________________
James 02 LB7, LLY, LBZ, LMM, LML, L5P 2500HD CC/LB dmax/alli "The Limo" BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me. ![]() best time to date: 12.39 motor died/bent rods = 3/11/11 back from the dead 7:04pm 4/9/2012 Limo is back in the garage, now driving a built chevy tracker ![]() Tailgate Crew Member #4 |
#923
|
|||
|
|||
![]() ![]() |
#924
|
||||
|
||||
![]()
Ordered the radiator and fan kit, figured on a 3-4 week build time but waiting to hear back from Ron Davis, might be able to pick it all up Tuesday of next week!
__________________
James 02 LB7, LLY, LBZ, LMM, LML, L5P 2500HD CC/LB dmax/alli "The Limo" BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me. ![]() best time to date: 12.39 motor died/bent rods = 3/11/11 back from the dead 7:04pm 4/9/2012 Limo is back in the garage, now driving a built chevy tracker ![]() Tailgate Crew Member #4 |
#925
|
||||
|
||||
![]()
Nice James
![]()
__________________
2006 CCLB LT3 Victory Red SDP Built Trans w/ Goerend G billet stator S472sx-e .87/1.0ar w/ SDP Piping Wagler street intake Custom 80" Trac Bars by MBS Diesel ADII 165 Full Kryptonite Front end PPE manifolds up pipes Special Thanks to:Scott@SDP Tuned by:Blake@UDT Best time to date: 12.08 @ 112.58 1.76 60ft |
#926
|
||||
|
||||
![]()
Curious to see this
__________________
Sean 02 CCSB Moonshine tunes, Mike L trans ![]() ![]() Exergy Sportsman, 4/6 drop, LML 20's/420's supporting mods |
#927
|
||||
|
||||
![]()
Did a bunch of running around today but I now have everything to put this sucker together. Grabbed the aux rad from Joe along with fan, shroud and front end shrouding. Then ran across town to pull a bumper off my buddies truck he’s parting out. It’s not perfect but had everything I needed. Going to see if I can pop the dent out and get a new top plastic piece before I get the plastics color matched
![]() ![]() Now to figure out when the hell I can do it all. Maybe over my week off between Christmas and New Years..... if I can make myself wait that long
__________________
James 02 LB7, LLY, LBZ, LMM, LML, L5P 2500HD CC/LB dmax/alli "The Limo" BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me. ![]() best time to date: 12.39 motor died/bent rods = 3/11/11 back from the dead 7:04pm 4/9/2012 Limo is back in the garage, now driving a built chevy tracker ![]() Tailgate Crew Member #4 |
#928
|
||||
|
||||
![]()
So I worked over the tracker pretty good on my trip in Mexico. 200 mile round trip of dirt punishment. Tweaked the frame and killed the front suspension.... So I’m dailying the limo.
That said, needed to work on some things. Swapped the solid fan hub back to the viscous clutch, changed a bad brake bulb out, put the “tow tune” back in and Josh has freed up time to get the 6 speed tuning dialed for running G3 clutches. On the first revision today and so far so good. Cleaner smoother down shifts and thus far (crossing fingers), the “bump” I get when the trans is hot from the 2-1 down shift/false neutral is cleaning up. Tomorrow morning I’ll see if the rough down shifts when cold are cleaner. I do need to figure out what I want to do for a dual fueled controller, 90% sure mines dieing as it lopes/rattles coming to an idle from a coast and sometimes lopes just idling. Did walk a mmi kid on a Harley on the on ramp. Was getting the trans learned on the new tune and looked back to see the bike trying to keep up but just fading back. That was pretty funny
__________________
James 02 LB7, LLY, LBZ, LMM, LML, L5P 2500HD CC/LB dmax/alli "The Limo" BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me. ![]() best time to date: 12.39 motor died/bent rods = 3/11/11 back from the dead 7:04pm 4/9/2012 Limo is back in the garage, now driving a built chevy tracker ![]() Tailgate Crew Member #4 |
#929
|
||||
|
||||
![]()
Silly Harley shouldve know better
![]()
__________________
04.5’ CCSB ole blue, built trans, mpi twins 03’ Reg Cab ZF 6 05’ CCSB ole crappy, built eng, built trans, mpi twins |
#930
|
||||
|
||||
![]()
Harleys are loud and slow from what ive seen. Lol
__________________
2006 CCLB LT3 Victory Red SDP Built Trans w/ Goerend G billet stator S472sx-e .87/1.0ar w/ SDP Piping Wagler street intake Custom 80" Trac Bars by MBS Diesel ADII 165 Full Kryptonite Front end PPE manifolds up pipes Special Thanks to:Scott@SDP Tuned by:Blake@UDT Best time to date: 12.08 @ 112.58 1.76 60ft |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|