Duramax Diesels Forum Truck of the Week
  #1  
Old 03-14-2019, 08:55 AM
prostreeter600's Avatar
prostreeter600 prostreeter600 is offline
Street rodder
 
Join Date: Jul 2010
Location: Dallas Tx
Posts: 821

Default Best 60’ on a street/strip truck

Whether you run it on street tires or put race tires on it for the track . By street truck I mean a truck that isn’t gutted out . Like bed of truck removed and or all the dash ,door panels and glass removed in leu of lexan etc . Still running a heater and AC system. THIS IS JUST OUT OF CURIOSITY. I’m hoping to get mine in the 1.3s this year if all goes well . THIS IS JUST A TOPIC FOR DISCUSSION.
__________________
06! GMC Sierra RC Full built motor, carillos, 14/1 Arias W/total seal rings, 9100 AF, SCalTit retainers,SCalsprings,ported heads, SCal pushrods, ARP 625 head studs, O-ringed block, keyed oil pump ,Billet Aluminum Lifters, Harland Sharp Aluminum roller rockers, studded rocker shafts, studded & girdled mains, socal balancer, socal flywheel, PPE Dual Fuelers with twin Fleece 10 mm CP3s , FASS Titanium 260 , 3" bridge, , TRIPLES----2---S369SXEs .88ARs over a Hybrid GTX 4202R--72mm/87mm 1.0 AR ,coilovers at 4 corners, 36" ladder bars, BD cooler, Exergy LBZ 250s ,FF Dynamics fans, PPE mans & ups , MA mounts & TC Brace ,NOS, Full Billet Trans, Suncoast 10531-3D , 3.42 Gears, BT lockup box. 16 x 12s & 16 x 10 Real Wheels with M & H 12/16s and 13/16s. TUNED by MARK@DANVILLE. Engine by Jason Walker San Marcus Tx Best 60'---1.42 .Best 1/8---6.19@113.24 . Best 1/4 prior to 6.19 is --9.978@136.39
Reply With Quote
  #2  
Old 03-14-2019, 09:00 AM
Ne-max's Avatar
Ne-max Ne-max is offline
I like turtles
 
Join Date: Nov 2011
Location: omaha ne
Posts: 2,996

Default

Also a true long box factory weight truck.
__________________
2013 ccsb Tow rig
2006 rclb 6.6
The fun stuff. Built motor, trans, triples, nitrous
Reply With Quote
  #3  
Old 03-14-2019, 09:33 AM
prostreeter600's Avatar
prostreeter600 prostreeter600 is offline
Street rodder
 
Join Date: Jul 2010
Location: Dallas Tx
Posts: 821

Default

I guess you need to start a separate thread for that then . Nothing wrong with some weight reduction as long as it’s not just the skins hanging off the truck and or that it looks like a straight up gutted out race truck with no creature comforts. Nothing wrong with lighter wheels and tires , single battery etc . Not sure why your trying to bust my chops on a simple thread I put up for discussion. I guess it’s aimed at me since I went with a short bed . I’ll say it again I’m not here for drama . I set up the thread with parameters I feel make a street truck .
__________________
06! GMC Sierra RC Full built motor, carillos, 14/1 Arias W/total seal rings, 9100 AF, SCalTit retainers,SCalsprings,ported heads, SCal pushrods, ARP 625 head studs, O-ringed block, keyed oil pump ,Billet Aluminum Lifters, Harland Sharp Aluminum roller rockers, studded rocker shafts, studded & girdled mains, socal balancer, socal flywheel, PPE Dual Fuelers with twin Fleece 10 mm CP3s , FASS Titanium 260 , 3" bridge, , TRIPLES----2---S369SXEs .88ARs over a Hybrid GTX 4202R--72mm/87mm 1.0 AR ,coilovers at 4 corners, 36" ladder bars, BD cooler, Exergy LBZ 250s ,FF Dynamics fans, PPE mans & ups , MA mounts & TC Brace ,NOS, Full Billet Trans, Suncoast 10531-3D , 3.42 Gears, BT lockup box. 16 x 12s & 16 x 10 Real Wheels with M & H 12/16s and 13/16s. TUNED by MARK@DANVILLE. Engine by Jason Walker San Marcus Tx Best 60'---1.42 .Best 1/8---6.19@113.24 . Best 1/4 prior to 6.19 is --9.978@136.39
Reply With Quote
  #4  
Old 03-14-2019, 09:51 AM
gmduramax's Avatar
gmduramax gmduramax is offline
Shits broke
 
Join Date: Jun 2008
Location: Nor cal
Posts: 3,235

Default

I went 1.55 with stock shocks and caltracs on 305/50/20 Yokohama’s back when I had a stock turbo and nitrous. I feel like the converter has a big effect on 60ft because now with my 3500 stall I think my best 60 has been like 1.62
__________________
2008 GMC duramax crew cab short bed 2500.
10.98@124mph

Thanks to Mike L, SoCal Diesel, and Abel Chevorlet.

Tailgate Crew Member #1
Reply With Quote
  #5  
Old 03-14-2019, 09:52 AM
Ne-max's Avatar
Ne-max Ne-max is offline
I like turtles
 
Join Date: Nov 2011
Location: omaha ne
Posts: 2,996

Default

1.47 60ft at 6100 pounds. Goal is 1.2x 60ft this spring.
__________________
2013 ccsb Tow rig
2006 rclb 6.6
The fun stuff. Built motor, trans, triples, nitrous
Reply With Quote
  #6  
Old 03-14-2019, 09:58 AM
zf>allison's Avatar
zf>allison zf>allison is offline
you never had your car.
 
Join Date: Apr 2013
Location: elsberry mo
Posts: 3,368

Default

The funny thing is it seems the heavier trucks 60 better without alot of suspension work. The lighter mine gets the less bite I have on the track.
__________________
04.5 single cab lly zf6 barely not stock.(the jalopy)
05 single cab lly zf6
Arp studs, welded water pump, 100 overs, dual fuelers, valair 1000 hp triple disc, danville efi live, fass 150, custom single s400 kit,
serious weight reduction
28x10x16 Hoosier slicks on pyos
Down on 2 leaves, t bolts gone.

best
10.91 at 129mph, 1.577 60 foot
dynoed 743 hp raceweight 5k with driver
Instagram-636zf6
Reply With Quote
  #7  
Old 03-14-2019, 10:00 AM
prostreeter600's Avatar
prostreeter600 prostreeter600 is offline
Street rodder
 
Join Date: Jul 2010
Location: Dallas Tx
Posts: 821

Default

A lot of trial and error too . Only way to know if the adjustments we make help or hurt .
__________________
06! GMC Sierra RC Full built motor, carillos, 14/1 Arias W/total seal rings, 9100 AF, SCalTit retainers,SCalsprings,ported heads, SCal pushrods, ARP 625 head studs, O-ringed block, keyed oil pump ,Billet Aluminum Lifters, Harland Sharp Aluminum roller rockers, studded rocker shafts, studded & girdled mains, socal balancer, socal flywheel, PPE Dual Fuelers with twin Fleece 10 mm CP3s , FASS Titanium 260 , 3" bridge, , TRIPLES----2---S369SXEs .88ARs over a Hybrid GTX 4202R--72mm/87mm 1.0 AR ,coilovers at 4 corners, 36" ladder bars, BD cooler, Exergy LBZ 250s ,FF Dynamics fans, PPE mans & ups , MA mounts & TC Brace ,NOS, Full Billet Trans, Suncoast 10531-3D , 3.42 Gears, BT lockup box. 16 x 12s & 16 x 10 Real Wheels with M & H 12/16s and 13/16s. TUNED by MARK@DANVILLE. Engine by Jason Walker San Marcus Tx Best 60'---1.42 .Best 1/8---6.19@113.24 . Best 1/4 prior to 6.19 is --9.978@136.39
Reply With Quote
  #8  
Old 03-14-2019, 10:03 AM
coker6365's Avatar
coker6365 coker6365 is offline
Coker6303's ***** Daddy
 
Join Date: Dec 2011
Posts: 338

Default

My best 60ft was after shedding 900lbs and good track prep. Squeezed out a 1.47 on Rancho 9000's, stock torsion setup, and heavy dom track bars. Definately a gutted scenario though.

Sent from my SM-G930V using Tapatalk
__________________
2015 Denali CC/SB LML
2013 RC/LB LML
2006 RC/LB LBZ, SXE472/87/1.0 & FI491/100/1.45, 250% F1 Injectors, Dual 10mm CP3, SoCal Built Engine, JoshH Built Trans, JoshH Tuning. 10.18 @ 140mph and still going...

Big thanks to Josh Harris, Josh Chambers, and my brother Russell Coker for all the help with the LBZ.
Reply With Quote
  #9  
Old 03-14-2019, 10:16 AM
prostreeter600's Avatar
prostreeter600 prostreeter600 is offline
Street rodder
 
Join Date: Jul 2010
Location: Dallas Tx
Posts: 821

Default

Ha ha ha GUTTED SCENARIO FOR SURE HUH . None the less it’s a hell of a feeling when you pull off a good 60’
__________________
06! GMC Sierra RC Full built motor, carillos, 14/1 Arias W/total seal rings, 9100 AF, SCalTit retainers,SCalsprings,ported heads, SCal pushrods, ARP 625 head studs, O-ringed block, keyed oil pump ,Billet Aluminum Lifters, Harland Sharp Aluminum roller rockers, studded rocker shafts, studded & girdled mains, socal balancer, socal flywheel, PPE Dual Fuelers with twin Fleece 10 mm CP3s , FASS Titanium 260 , 3" bridge, , TRIPLES----2---S369SXEs .88ARs over a Hybrid GTX 4202R--72mm/87mm 1.0 AR ,coilovers at 4 corners, 36" ladder bars, BD cooler, Exergy LBZ 250s ,FF Dynamics fans, PPE mans & ups , MA mounts & TC Brace ,NOS, Full Billet Trans, Suncoast 10531-3D , 3.42 Gears, BT lockup box. 16 x 12s & 16 x 10 Real Wheels with M & H 12/16s and 13/16s. TUNED by MARK@DANVILLE. Engine by Jason Walker San Marcus Tx Best 60'---1.42 .Best 1/8---6.19@113.24 . Best 1/4 prior to 6.19 is --9.978@136.39
Reply With Quote
  #10  
Old 03-14-2019, 10:21 AM
Bdsankey's Avatar
Bdsankey Bdsankey is offline
Hotrodder

 
Join Date: Feb 2018
Location: Oshkosh, WI
Posts: 469

Default

Quote:
Originally Posted by coker6365 View Post
My best 60ft was after shedding 900lbs and good track prep. Squeezed out a 1.47 on Rancho 9000's, stock torsion setup, and heavy dom track bars. Definately a gutted scenario though.

Sent from my SM-G930V using Tapatalk
This image makes my day!
__________________
Current Rides:
1) Toy: 2005 LLY ECSB, Leather, Sunroof
-820hp/1748ft-lbs @ Duramax Tuner (6/25/18) - Old 475/87/1.00 setup
-Built Motor, Forced Inductions Billet ETR 480/96/1.10 T6, Modded Exergy 250% Injectors, Exergy 14mm Street Pump/LBZ CP3, Goerend J Converter, Billet Trans, Fuelab Supply Pump/Reg, RCD Sump, Front E-Locker, TrueTrac, Yukon 4340 Rear Shafts, Traction Bars, DHD Center Link Brace, DHD Lower Crossmember Support


2) DD/Tow Rig: 2002 LB7 CCSB, Leather, Loaded
-Bosch NEW Injectors, FASS 150, 3" Downpipe, 4" Downpipe Back, RCD Sump, PPE Sleeves, DHD Centerlink Brace, DHD Lower Crossmember Support, Steering Wheel Radio Control Swap
Reply With Quote
  #11  
Old 03-14-2019, 11:23 AM
Burn Down's Avatar
Burn Down Burn Down is offline
Hotrodder
 
Join Date: Sep 2008
Location: Boise Idaho
Posts: 6,714

Default

Best 60’ to date for the 05 is a 1.67 6800 ccsb rancho 9000 caltracs 305/50r20 proxes overload removed. Excited for the track to open and test some settings Rob and I came up with.
__________________
04.5’ CCSB ole blue, built trans, mpi twins
03’ Reg Cab ZF 6
05’ CCSB ole crappy, built eng, built trans, mpi twins
Reply With Quote
  #12  
Old 03-14-2019, 11:26 AM
TheBac's Avatar
TheBac TheBac is offline
Why do I keep doing this?


 
Join Date: Apr 2008
Location: Mid Michigan
Posts: 12,203

Default

1.59 best, usually low 1.6x,

6450#, Toyo Proxes tires, T-bars lowered, QA1 adjustable shocks on front, caltracs.

I used to have fun jumping out on faster cars, making them say, "wtf?!?"
__________________
Tom
"BBT" -- 2003 GMC CC/SB 4x4 12.14@111.15
"The Cruzer" -- 2014 Chevy Cruze Diesel -- the DD
"Kleshay" -- 2000 C5 Corvette -- the toy

Marlene (Molly) Bacon -- 1936 - 2019 -- RIP Mom You're already missed, at home and on the piano.

Two wrongs dont make a right, but three rights do make a left.
Reality is a matter of perspective.
This forum isn't for the weak of heart.....or wallet.
"Lets build a race car they said. Itll be fun they said. I don't know who "they" are.........but they need a good punch in the face!" -- mufflerguy (yb)

Last edited by TheBac; 03-14-2019 at 05:48 PM.
Reply With Quote
  #13  
Old 03-14-2019, 11:29 AM
prostreeter600's Avatar
prostreeter600 prostreeter600 is offline
Street rodder
 
Join Date: Jul 2010
Location: Dallas Tx
Posts: 821

Default

I know the feeling Tom . All in good fun .
__________________
06! GMC Sierra RC Full built motor, carillos, 14/1 Arias W/total seal rings, 9100 AF, SCalTit retainers,SCalsprings,ported heads, SCal pushrods, ARP 625 head studs, O-ringed block, keyed oil pump ,Billet Aluminum Lifters, Harland Sharp Aluminum roller rockers, studded rocker shafts, studded & girdled mains, socal balancer, socal flywheel, PPE Dual Fuelers with twin Fleece 10 mm CP3s , FASS Titanium 260 , 3" bridge, , TRIPLES----2---S369SXEs .88ARs over a Hybrid GTX 4202R--72mm/87mm 1.0 AR ,coilovers at 4 corners, 36" ladder bars, BD cooler, Exergy LBZ 250s ,FF Dynamics fans, PPE mans & ups , MA mounts & TC Brace ,NOS, Full Billet Trans, Suncoast 10531-3D , 3.42 Gears, BT lockup box. 16 x 12s & 16 x 10 Real Wheels with M & H 12/16s and 13/16s. TUNED by MARK@DANVILLE. Engine by Jason Walker San Marcus Tx Best 60'---1.42 .Best 1/8---6.19@113.24 . Best 1/4 prior to 6.19 is --9.978@136.39
Reply With Quote
  #14  
Old 03-14-2019, 11:34 AM
prostreeter600's Avatar
prostreeter600 prostreeter600 is offline
Street rodder
 
Join Date: Jul 2010
Location: Dallas Tx
Posts: 821

Default

I hear ya Albert , tracks are open here already but I’m having to fix some issues I’m having but hopefully in the next several weeks I can get it back to the track
__________________
06! GMC Sierra RC Full built motor, carillos, 14/1 Arias W/total seal rings, 9100 AF, SCalTit retainers,SCalsprings,ported heads, SCal pushrods, ARP 625 head studs, O-ringed block, keyed oil pump ,Billet Aluminum Lifters, Harland Sharp Aluminum roller rockers, studded rocker shafts, studded & girdled mains, socal balancer, socal flywheel, PPE Dual Fuelers with twin Fleece 10 mm CP3s , FASS Titanium 260 , 3" bridge, , TRIPLES----2---S369SXEs .88ARs over a Hybrid GTX 4202R--72mm/87mm 1.0 AR ,coilovers at 4 corners, 36" ladder bars, BD cooler, Exergy LBZ 250s ,FF Dynamics fans, PPE mans & ups , MA mounts & TC Brace ,NOS, Full Billet Trans, Suncoast 10531-3D , 3.42 Gears, BT lockup box. 16 x 12s & 16 x 10 Real Wheels with M & H 12/16s and 13/16s. TUNED by MARK@DANVILLE. Engine by Jason Walker San Marcus Tx Best 60'---1.42 .Best 1/8---6.19@113.24 . Best 1/4 prior to 6.19 is --9.978@136.39
Reply With Quote
  #15  
Old 03-14-2019, 12:00 PM
JoshH's Avatar
JoshH JoshH is offline
Daggum farm truck
 
Join Date: Feb 2007
Location: Texas!!!
Posts: 12,918

Default

Quote:
Originally Posted by coker6365 View Post
My best 60ft was after shedding 900lbs and good track prep. Squeezed out a 1.47 on Rancho 9000's, stock torsion setup, and heavy dom track bars. Definately a gutted scenario though.

Sent from my SM-G930V using Tapatalk
You can sure see how bad that exhaust manifold gasket was leaking in that screen shot.
__________________
06 Silverado 4x4 CC/SB

06 Express 2500 Duramax Van "The Dumpster"


Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:52 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vB.Sponsors