Duramax Diesels Forum Truck of the Week
  #1  
Old 07-17-2017, 06:30 PM
Lance LB7's Avatar
Lance LB7 Lance LB7 is offline
Gearhead
 
Join Date: Nov 2013
Location: Kentucky
Posts: 43

Default Broken pedal

The day has come that I've been reading about and my clutch pedal broke. It won't disengage the clutch. Any wisdom on where to source a new one and tips to replace it would be appreciated.

This is the part number I've found, can someone verify?
AM-5550462


Sent from my iPhone using Tapatalk
__________________
LB7 / ZF6
Full Ceramic DD
Twisted Diesel Tuning
Airdog 150, BD manifolds & Intercooler, Banks wastegate, head studs
Reply With Quote
  #2  
Old 07-18-2017, 05:11 AM
hntngkd's Avatar
hntngkd hntngkd is offline
Hotrodder
 
Join Date: Jun 2013
Location: Attica, Mi
Posts: 117

Default

There is a guy on facebook that makes steel replacements. Eric haverkamp is his name. E.haverkamp3@gmail.com is his paypal so i would imagine you should be able to get ahold of him that way if you dont have facebook

Sent from my SM-N920P using Tapatalk
__________________
2006 "LLY" ECLB DRW, DEAD 5/3/2015.... Alive again..... 11/30/16
Fingers cast 15.5:1, R&R rods, Callies billet crank internally balanced, Wagler AF stage 2 Cam, Main Girdle, Billet Mains, Fire ringed block,
Wagler Pushrods, Valve Springs, Ported LBZ heads
SBDDD 3600lb sintered iron
HSP Compounds SXE-371/82/.91 S485/96/1.32 V2 by Forced Inductions, Profab castflow manifolds, Turbosmart Hyper-gate HP45, Turbosmart Race port BOV and controller, Mishimoto Intercooler
Exergy 250% injectors, Dual Fuelers, Fuelab 200
Danville tuning
FF Dynamic Fans
ARB air locker

2017 Cruze LT diesel LH7 stock
Reply With Quote
  #3  
Old 07-24-2017, 05:03 AM
Lance LB7's Avatar
Lance LB7 Lance LB7 is offline
Gearhead
 
Join Date: Nov 2013
Location: Kentucky
Posts: 43

Default

Quote:
Originally Posted by hntngkd View Post
There is a guy on facebook that makes steel replacements. Eric haverkamp is his name. E.haverkamp3@gmail.com is his paypal so i would imagine you should be able to get ahold of him that way if you dont have facebook

Sent from my SM-N920P using Tapatalk


Got one bought and put in. Biggest pain in the ass ever but well worth It. Thanks man


Sent from my iPhone using Tapatalk
__________________
LB7 / ZF6
Full Ceramic DD
Twisted Diesel Tuning
Airdog 150, BD manifolds & Intercooler, Banks wastegate, head studs
Reply With Quote
  #4  
Old 07-24-2017, 06:12 AM
hntngkd's Avatar
hntngkd hntngkd is offline
Hotrodder
 
Join Date: Jun 2013
Location: Attica, Mi
Posts: 117

Default

Glad I could help. Mine is still sitting in the box waiting for the plastic one to break or at least a good reason to put it in.
__________________
2006 "LLY" ECLB DRW, DEAD 5/3/2015.... Alive again..... 11/30/16
Fingers cast 15.5:1, R&R rods, Callies billet crank internally balanced, Wagler AF stage 2 Cam, Main Girdle, Billet Mains, Fire ringed block,
Wagler Pushrods, Valve Springs, Ported LBZ heads
SBDDD 3600lb sintered iron
HSP Compounds SXE-371/82/.91 S485/96/1.32 V2 by Forced Inductions, Profab castflow manifolds, Turbosmart Hyper-gate HP45, Turbosmart Race port BOV and controller, Mishimoto Intercooler
Exergy 250% injectors, Dual Fuelers, Fuelab 200
Danville tuning
FF Dynamic Fans
ARB air locker

2017 Cruze LT diesel LH7 stock
Reply With Quote
  #5  
Old 07-24-2017, 06:28 AM
zf>allison's Avatar
zf>allison zf>allison is offline
you never had your car.
 
Join Date: Apr 2013
Location: elsberry mo
Posts: 3,350

Default

Must just be the luck of the draw. Mines still plastic and it definitely gets its use. I want a metal one but was gonna wait til this one failed.
__________________
04.5 single cab lly zf6 barely not stock.(the jalopy)
05 single cab lly zf6
Arp studs, welded water pump, 100 overs, dual fuelers, valair 1000 hp triple disc, danville efi live, fass 150, custom single s400 kit,
serious weight reduction
28x10x16 Hoosier slicks on pyos
Down on 2 leaves, t bolts gone.

best
10.91 at 129mph, 1.577 60 foot
dynoed 743 hp raceweight 5k with driver
Instagram-636zf6
Reply With Quote
  #6  
Old 07-24-2017, 07:46 AM
hntngkd's Avatar
hntngkd hntngkd is offline
Hotrodder
 
Join Date: Jun 2013
Location: Attica, Mi
Posts: 117

Default

Quote:
Originally Posted by zf>allison View Post
Must just be the luck of the draw. Mines still plastic and it definitely gets its use. I want a metal one but was gonna wait til this one failed.
I bought one already just so I don't have to wait for it to ship. Plastic one is still holding strong for now.
__________________
2006 "LLY" ECLB DRW, DEAD 5/3/2015.... Alive again..... 11/30/16
Fingers cast 15.5:1, R&R rods, Callies billet crank internally balanced, Wagler AF stage 2 Cam, Main Girdle, Billet Mains, Fire ringed block,
Wagler Pushrods, Valve Springs, Ported LBZ heads
SBDDD 3600lb sintered iron
HSP Compounds SXE-371/82/.91 S485/96/1.32 V2 by Forced Inductions, Profab castflow manifolds, Turbosmart Hyper-gate HP45, Turbosmart Race port BOV and controller, Mishimoto Intercooler
Exergy 250% injectors, Dual Fuelers, Fuelab 200
Danville tuning
FF Dynamic Fans
ARB air locker

2017 Cruze LT diesel LH7 stock
Reply With Quote
  #7  
Old 07-24-2017, 12:09 PM
weazel's Avatar
weazel weazel is offline
Hotrodder
 
Join Date: Oct 2011
Location: Mason, TX
Posts: 251
Default

Out of curiosity, could one of those firewall adapters that the dodges use be integrated to these trucks? Usually when you get a dual disc kit, they send a new firewall mount with the new hydraulics. It uses two studs to go through the firewall, made of metal, and the master cylinder twists into the adapter.

I may be way out in left field with that thought, I've never seen the master cylinder setup on a duramax truck so this idea may not work at all lol
__________________
88 Chevy 1/2 ton- LB7 conversion project
93 Chevy K3500- CR Cummins conversion project
05 Chevy LLY 5" ex, EFI DSP5
Reply With Quote
  #8  
Old 07-24-2017, 12:22 PM
Lance LB7's Avatar
Lance LB7 Lance LB7 is offline
Gearhead
 
Join Date: Nov 2013
Location: Kentucky
Posts: 43

Default

Quote:
Originally Posted by weazel View Post
Out of curiosity, could one of those firewall adapters that the dodges use be integrated to these trucks? Usually when you get a dual disc kit, they send a new firewall mount with the new hydraulics. It uses two studs to go through the firewall, made of metal, and the master cylinder twists into the adapter.

I may be way out in left field with that thought, I've never seen the master cylinder setup on a duramax truck so this idea may not work at all lol


If I'm not mistaken, someone makes a plate that goes on the firewall of these trucks to kind of do that. But the metal assembly I bought includes all that. The part that goes through the firewall, the pedal and everything


Sent from my iPhone using Tapatalk
__________________
LB7 / ZF6
Full Ceramic DD
Twisted Diesel Tuning
Airdog 150, BD manifolds & Intercooler, Banks wastegate, head studs
Reply With Quote
  #9  
Old 07-24-2017, 01:55 PM
weazel's Avatar
weazel weazel is offline
Hotrodder
 
Join Date: Oct 2011
Location: Mason, TX
Posts: 251
Default

Could I see a photo of that?

I'm wanting to convert an 08 to manual is why I've been curious about the dodge plate, and what you guys are talking about.
__________________
88 Chevy 1/2 ton- LB7 conversion project
93 Chevy K3500- CR Cummins conversion project
05 Chevy LLY 5" ex, EFI DSP5
Reply With Quote
  #10  
Old 12-21-2018, 03:00 PM
Clutch_less Clutch_less is offline
5th clutch coming soon
 
Join Date: Nov 2018
Location: TN & FL
Posts: 12
Default

Has anyone talked to Eric Haverkamp (sp?) I need one of his metal clutch pedal assemblies and email to him hasn't worked so far. A phone # might be better in this case. Thanks.
__________________
02 GMC 3500 CC, 4WD, custom class C motorhome

stock LB7
ZF6, 4 clutches so far
Reply With Quote
  #11  
Old 12-25-2018, 12:43 PM
Clutch_less Clutch_less is offline
5th clutch coming soon
 
Join Date: Nov 2018
Location: TN & FL
Posts: 12
Default

Eric contacted me--thanks- I think I'll be getting his all metal clutch pedal assembly soon
__________________
02 GMC 3500 CC, 4WD, custom class C motorhome

stock LB7
ZF6, 4 clutches so far
Reply With Quote
  #12  
Old 01-10-2019, 03:02 PM
fl0w3n fl0w3n is offline
Gearhead
 
Join Date: Jan 2015
Posts: 52
Default

Quote:
Originally Posted by Lance LB7 View Post
Got one bought and put in. Biggest pain in the ass ever but well worth It. Thanks man


Sent from my iPhone using Tapatalk

What was such a pain in the ass about the install?



I remember in the Facebook ZF6 group people said it's not exactly a direct bolt in, but that's all that I saw.
__________________
2002 LB7/ZF6 CCSB Sierra 4x4
340k miles
Stock...for now

Plans:
KP D60 front, ORD leafs front/rear, Twin Stick NP205, 4.56 gearing locked rear, PSC steering/hydro assist , 37"s on H1 wheels, Titan or Aerotank replacement

SAC45% Injectors, SB SD clutch, Kennedy pump and filter heads, S&B intake, ProFab up/down pipe, manifolds, Mild Tune from Rob
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 10:51 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vB.Sponsors