Duramax Diesels Forum Truck of the Week
  #46  
Old 03-11-2019, 09:52 AM
duramaxzak's Avatar
duramaxzak duramaxzak is online now
Wanna be puller!
 
Join Date: Nov 2008
Location: Minnesota
Posts: 2,195
Default

Quote:
Originally Posted by Rancelot211 View Post
Have a phone number for levi?
https://turbo-performance-products.myshopify.com
__________________
- ZAK

2011 CHEVY 2500HD CCSB Duramax/Allison LTZ

2005 CHEVY 2500HD RCLB 2WD Duramax/Allison

2002 GMC 2500HD RCLB Duramax/allison 2.6 puller
Special thanks to:
- Danville performance, Mark.
- Suncoast transmission's, Andrew.
- Wehrli custom fab, Jason.
- Profab, Rick
- Turbo performance, Levi.
- HSP, Joe and Dave.
- SoCal diesel.
- Wagler competition, Jeramy.
Reply With Quote
  #47  
Old 03-11-2019, 04:37 PM
Rancelot211's Avatar
Rancelot211 Rancelot211 is offline
Boyd
 
Join Date: Jan 2015
Location: Ohio
Posts: 954

Default

Thanks zak.
__________________
Travis Boyd
2007.5 lmm Ccsb: 628hp 1237 ftlbs.-sold
06 lbz ccsb sas. 72mm/s483. 10mm cp3. 60 overs studs custom fuel system and 37s. Ford super 60 with an arb air locker up front dodge 11.5 rearend ford nv273 transfercase. a Bunch of other goodies!
02 lb7 reg cab 4x4.
Reply With Quote
  #48  
Old 03-19-2019, 05:54 PM
duramaxzak's Avatar
duramaxzak duramaxzak is online now
Wanna be puller!
 
Join Date: Nov 2008
Location: Minnesota
Posts: 2,195
Default

I found these 90 degree quick connect heater hose fitting that work with these heater core outlets. The factory straight fittings point almost straight into the exhaust crossover pipe.

IMG_5660.jpg
__________________
- ZAK

2011 CHEVY 2500HD CCSB Duramax/Allison LTZ

2005 CHEVY 2500HD RCLB 2WD Duramax/Allison

2002 GMC 2500HD RCLB Duramax/allison 2.6 puller
Special thanks to:
- Danville performance, Mark.
- Suncoast transmission's, Andrew.
- Wehrli custom fab, Jason.
- Profab, Rick
- Turbo performance, Levi.
- HSP, Joe and Dave.
- SoCal diesel.
- Wagler competition, Jeramy.
Reply With Quote
  #49  
Old 03-19-2019, 06:00 PM
duramaxzak's Avatar
duramaxzak duramaxzak is online now
Wanna be puller!
 
Join Date: Nov 2008
Location: Minnesota
Posts: 2,195
Default

Picture of the re routed heater core lines. I still need to shorten the oil drain line.

IMG_5662.jpg
__________________
- ZAK

2011 CHEVY 2500HD CCSB Duramax/Allison LTZ

2005 CHEVY 2500HD RCLB 2WD Duramax/Allison

2002 GMC 2500HD RCLB Duramax/allison 2.6 puller
Special thanks to:
- Danville performance, Mark.
- Suncoast transmission's, Andrew.
- Wehrli custom fab, Jason.
- Profab, Rick
- Turbo performance, Levi.
- HSP, Joe and Dave.
- SoCal diesel.
- Wagler competition, Jeramy.
Reply With Quote
  #50  
Old 03-19-2019, 06:14 PM
juddski88's Avatar
juddski88 juddski88 is offline
Freedom Diesel
 
Join Date: Jul 2008
Location: Chesterfield, Mass.
Posts: 4,185

Default

Those are handy, where did you find them?
__________________
2001 Chevy 2500HD ECSB
"Sore Subject" - Still don't have time for it.
I would never have learned what I have without George Alexander, Mike Lovrich, David Browning, Matt Handwork, Ben Tyler, Evan Drosehn and countless members of this forum and others.
Thank you.

2014 Jeep Grand Cherokee Limited, Ecodiesel
Reply With Quote
  #51  
Old 03-19-2019, 06:24 PM
duramaxzak's Avatar
duramaxzak duramaxzak is online now
Wanna be puller!
 
Join Date: Nov 2008
Location: Minnesota
Posts: 2,195
Default

Quote:
Originally Posted by juddski88 View Post
Those are handy, where did you find them?
Gates makes them.

Pn. 28505 fits 3/4" heater hose

Pn. 28504 fits 5/8" heater hose
__________________
- ZAK

2011 CHEVY 2500HD CCSB Duramax/Allison LTZ

2005 CHEVY 2500HD RCLB 2WD Duramax/Allison

2002 GMC 2500HD RCLB Duramax/allison 2.6 puller
Special thanks to:
- Danville performance, Mark.
- Suncoast transmission's, Andrew.
- Wehrli custom fab, Jason.
- Profab, Rick
- Turbo performance, Levi.
- HSP, Joe and Dave.
- SoCal diesel.
- Wagler competition, Jeramy.
Reply With Quote
  #52  
Old 03-20-2019, 06:42 AM
Bdsankey's Avatar
Bdsankey Bdsankey is online now
Gearhead

 
Join Date: Feb 2018
Location: Neenah, Wisconsin
Posts: 779

Default

Good find Zak!
__________________
Current Rides:
1) Toy: 2005 LLY ECSB, Leather, Sunroof
-1340hp/2200ft-lbs @ ATS Diesel (06/04/19)
-Tuned by Zach @ Starlite
-Built Motor, Forced Inductions Billet ETR Gen 4 S480/96/1.10 T6 w/V2 Race Cover, Modded Exergy 250% Injectors, Exergy 14mm Street Pump/LBZ CP3, Goerend Q Converter, Billet Trans, Fuelab Supply Pump/Reg, RCD & Beans Sumps, Front E-Locker, TrueTrac, Yukon 4340 Rear Shafts, Traction Bars, DHD Center Link Brace, DHD Lower Crossmember Support


2) DD/Tow Rig: 2002 LB7 CCSB, Leather, Loaded
-Tuned by Starlite
-Bosch NEW Injectors, FASS 150, 3" Downpipe, 4" Downpipe Back, RCD Sump, PPE Sleeves, DHD Centerlink Brace, DHD Lower Crossmember Support, Steering Wheel Radio Control Swap
Reply With Quote
  #53  
Old 03-20-2019, 08:15 AM
ZeroGravity58's Avatar
ZeroGravity58 ZeroGravity58 is offline
Hotrodder
 
Join Date: Mar 2008
Location: Maryland
Posts: 952

Default

Quote:
Originally Posted by duramaxzak View Post
Picture of the re routed heater core lines. I still need to shorten the oil drain line.

Attachment 49165
One line from the heater core goes into the bottom rad hose, I see that one. Where do you have the top line going? It should go to the top of the thermostat housing. Am I missing something???
__________________
09 lmm ccsb ltz, moonshine, mpi s480 over 68mm vgt, sdp y bridge, BigDipper trans, 60 overs, 10mm pump, ppe up pipes and manifold, banks intercooler & exhaust, airdog165, isspro guages, traction bars, the list goes on...Big thanks to BigDipper!
01 lb7 red RC/LB 11.58@119 MPH, SOLD
01 lb7 Black CC/LB, SOLD
Reply With Quote
  #54  
Old 03-20-2019, 08:22 AM
duramaxzak's Avatar
duramaxzak duramaxzak is online now
Wanna be puller!
 
Join Date: Nov 2008
Location: Minnesota
Posts: 2,195
Default

Quote:
Originally Posted by ZeroGravity58 View Post
One line from the heater core goes into the bottom rad hose, I see that one. Where do you have the top line going? It should go to the top of the thermostat housing. Am I missing something???
I tapped the coolant crossover and running the 12an line over the top of the alternator and down.

IMG_5658.jpg
__________________
- ZAK

2011 CHEVY 2500HD CCSB Duramax/Allison LTZ

2005 CHEVY 2500HD RCLB 2WD Duramax/Allison

2002 GMC 2500HD RCLB Duramax/allison 2.6 puller
Special thanks to:
- Danville performance, Mark.
- Suncoast transmission's, Andrew.
- Wehrli custom fab, Jason.
- Profab, Rick
- Turbo performance, Levi.
- HSP, Joe and Dave.
- SoCal diesel.
- Wagler competition, Jeramy.
Reply With Quote
  #55  
Old 03-20-2019, 08:24 AM
duramaxzak's Avatar
duramaxzak duramaxzak is online now
Wanna be puller!
 
Join Date: Nov 2008
Location: Minnesota
Posts: 2,195
Default

IMG_5610.jpg
__________________
- ZAK

2011 CHEVY 2500HD CCSB Duramax/Allison LTZ

2005 CHEVY 2500HD RCLB 2WD Duramax/Allison

2002 GMC 2500HD RCLB Duramax/allison 2.6 puller
Special thanks to:
- Danville performance, Mark.
- Suncoast transmission's, Andrew.
- Wehrli custom fab, Jason.
- Profab, Rick
- Turbo performance, Levi.
- HSP, Joe and Dave.
- SoCal diesel.
- Wagler competition, Jeramy.
Reply With Quote
  #56  
Old 03-20-2019, 03:33 PM
ZeroGravity58's Avatar
ZeroGravity58 ZeroGravity58 is offline
Hotrodder
 
Join Date: Mar 2008
Location: Maryland
Posts: 952

Default

Ah ok, by chance can you post a list of everything you used my trucks in pieces right now and I got rid of the line that runs up behind the motor so I'm looking to relocate mine
__________________
09 lmm ccsb ltz, moonshine, mpi s480 over 68mm vgt, sdp y bridge, BigDipper trans, 60 overs, 10mm pump, ppe up pipes and manifold, banks intercooler & exhaust, airdog165, isspro guages, traction bars, the list goes on...Big thanks to BigDipper!
01 lb7 red RC/LB 11.58@119 MPH, SOLD
01 lb7 Black CC/LB, SOLD
Reply With Quote
  #57  
Old 03-21-2019, 06:36 PM
duramaxzak's Avatar
duramaxzak duramaxzak is online now
Wanna be puller!
 
Join Date: Nov 2008
Location: Minnesota
Posts: 2,195
Default

Quote:
Originally Posted by ZeroGravity58 View Post
Ah ok, by chance can you post a list of everything you used my trucks in pieces right now and I got rid of the line that runs up behind the motor so I'm looking to relocate mine
- 10ft of 12AN hose
- 2 Gates 28505 90 deg quick connect fittings
- 1 90 deg 12AN female hose end
- 3 straight 12AN female hose ends
- 1 90 deg 12AN male union
- 1 10AN to 12AN straight male union
- 1 10AN male straight push lock
- 1 12AN to 1/2 NPT standoff

Or you could use the Gates 28504 fittings and 5/8's heater hose and barb fittings.
__________________
- ZAK

2011 CHEVY 2500HD CCSB Duramax/Allison LTZ

2005 CHEVY 2500HD RCLB 2WD Duramax/Allison

2002 GMC 2500HD RCLB Duramax/allison 2.6 puller
Special thanks to:
- Danville performance, Mark.
- Suncoast transmission's, Andrew.
- Wehrli custom fab, Jason.
- Profab, Rick
- Turbo performance, Levi.
- HSP, Joe and Dave.
- SoCal diesel.
- Wagler competition, Jeramy.
Reply With Quote
  #58  
Old 03-21-2019, 08:01 PM
hntngkd's Avatar
hntngkd hntngkd is offline
Hotrodder
 
Join Date: Jun 2013
Location: Attica, Mi
Posts: 127

Default

Quote:
Originally Posted by duramaxzak View Post
I found these 90 degree quick connect heater hose fitting that work with these heater core outlets. The factory straight fittings point almost straight into the exhaust crossover pipe.

Attachment 49164
I had used the same fittings when I first installed the compounds on my truck and I had an issue with one blowing off constantly during high rpm pulls. I tried a ton of different ones and they all did the same thing. I went back to a straight one and it solved all my problems. Just something to keep an eye on. They felt like they snapped on fine but more than a handful of times I had one of them blow off. Im not sure what was causing it, if it was just the sharp 90 and there is too much coolant flow through there or what.
__________________
2006 "LLY" ECLB DRW, DEAD 5/3/2015.... Alive again..... 11/30/16
Fingers cast 15.5:1, R&R rods, Callies billet crank internally balanced, Wagler AF stage 2 Cam, Main Girdle, Billet Mains, Fire ringed block,
Wagler Pushrods, Valve Springs, Ported LBZ heads
SBDDD 3600lb sintered iron
HSP Compounds SXE-371/75/.91 S485/96/1.32 V2 by Forced Inductions, Profab castflow manifolds, Turbosmart Hyper-gate HP45, Turbosmart Race port BOV and controller, Mishimoto Intercooler
Exergy 250% injectors, Dual Fuelers, Fuelab 200
Danville tuning
FF Dynamic Fans
ARB air locker

2017 Cruze LT diesel LH7 stock
Reply With Quote
  #59  
Old 03-22-2019, 06:39 AM
duramaxzak's Avatar
duramaxzak duramaxzak is online now
Wanna be puller!
 
Join Date: Nov 2008
Location: Minnesota
Posts: 2,195
Default

Quote:
Originally Posted by hntngkd View Post
I had used the same fittings when I first installed the compounds on my truck and I had an issue with one blowing off constantly during high rpm pulls. I tried a ton of different ones and they all did the same thing. I went back to a straight one and it solved all my problems. Just something to keep an eye on. They felt like they snapped on fine but more than a handful of times I had one of them blow off. Im not sure what was causing it, if it was just the sharp 90 and there is too much coolant flow through there or what.
Good to know...

I'm a machinist by trade, and have been thinking about making some billet ones that will accept 12AN fittings.
__________________
- ZAK

2011 CHEVY 2500HD CCSB Duramax/Allison LTZ

2005 CHEVY 2500HD RCLB 2WD Duramax/Allison

2002 GMC 2500HD RCLB Duramax/allison 2.6 puller
Special thanks to:
- Danville performance, Mark.
- Suncoast transmission's, Andrew.
- Wehrli custom fab, Jason.
- Profab, Rick
- Turbo performance, Levi.
- HSP, Joe and Dave.
- SoCal diesel.
- Wagler competition, Jeramy.
Reply With Quote
  #60  
Old 03-25-2019, 09:50 AM
duramaxzak's Avatar
duramaxzak duramaxzak is online now
Wanna be puller!
 
Join Date: Nov 2008
Location: Minnesota
Posts: 2,195
Default

Built some traction bars, made from 2" DOM 1/4" wall with Ballistic fab poly joints.

IMG_5685.jpg
__________________
- ZAK

2011 CHEVY 2500HD CCSB Duramax/Allison LTZ

2005 CHEVY 2500HD RCLB 2WD Duramax/Allison

2002 GMC 2500HD RCLB Duramax/allison 2.6 puller
Special thanks to:
- Danville performance, Mark.
- Suncoast transmission's, Andrew.
- Wehrli custom fab, Jason.
- Profab, Rick
- Turbo performance, Levi.
- HSP, Joe and Dave.
- SoCal diesel.
- Wagler competition, Jeramy.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 06:15 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vB.Sponsors