|
|
|
#1
05-15-2018, 09:32 AM
|
||||
|
||||
Bolt identification
Anyone know what grade or seen this type of bolt? We inherited a ton of these style bolts but they feel too light compared to a grade 5 or 8.
__________________
Bryan 11 CCSB 4x4 EFI by Ridgerunner, 5" FloPro, Profab manifolds and up pipes, Wehrli cp3 conversion, 3" downpipe, S&B intake, AD165 4G, DHD tie rod sleeves, 2" rear drop shackles, Rancho RS9000XL 
|
|
#2
05-15-2018, 10:02 AM
|
||||
|
||||
|
Quote:
__________________
Quote:
02 LB7, LLY, LBZ, LMM, LML, L5P 2500HD CC/LB dmax/alli "The Limo" BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me.  best time to date: 12.39 motor died/bent rods = 3/11/11 back from the dead 7:04pm 4/9/2012 Limo is back in the garage, now driving a built chevy tracker  Tailgate Crew Member #4
|
|
#3
05-15-2018, 10:28 AM
|
||||
|
||||
|
These are probably well before the Chinese junk. My uncle worked for some Nascar teams 15-20 years ago, I'm assuming that's where they came from. Good to know they are good stuff! Thanks james
__________________
Bryan 11 CCSB 4x4 EFI by Ridgerunner, 5" FloPro, Profab manifolds and up pipes, Wehrli cp3 conversion, 3" downpipe, S&B intake, AD165 4G, DHD tie rod sleeves, 2" rear drop shackles, Rancho RS9000XL
|
|
#4
05-15-2018, 10:50 AM
|
||||
|
||||
|
no prob! If there is anything you want to bolt down and not worry about the bolt breaking, its those. they are NOT cheap
__________________
Quote:
02 LB7, LLY, LBZ, LMM, LML, L5P 2500HD CC/LB dmax/alli "The Limo" BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me. best time to date: 12.39 motor died/bent rods = 3/11/11 back from the dead 7:04pm 4/9/2012 Limo is back in the garage, now driving a built chevy tracker Tailgate Crew Member #4
|
|
#5
05-15-2018, 10:57 AM
|
||||
|
||||
|
Good to know, we got a shit load of em
__________________
Sean 02 CCSB Moonshine tunes, Mike L trans  Mike L secret sheep converter Exergy Sportsman, 4/6 drop, LML 20's/420's supporting mods
|
|
#6
05-15-2018, 12:11 PM
|
||||
|
||||
|
Get a graded nut, and torque one to failure in a fixture. Should tell you everything you need to know about it, since it sounds like you can afford to destroy one.
__________________
  
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
