Search results

Search the forum Search Articles
  1. jbstephenson

    LB7: Recurring A/C Problem

    I totally forgot I posted about this until just now. Thanks for all the replies. Its been to three different shops, only two performing work, one being a dealer. Condenser, orifice, compressor have all been replaced. Evaporator has never been looked at, I know the blend door motor has gone bad...
  2. jbstephenson

    LB7: Recurring A/C Problem

    Hey guys, i've got a question about my A/C system that hopefully someone can help me with. I've owned my truck since December of 2014 and since then ive got through 4 a/c compressors. I don't know if this is an lb7 thing or my truck is a lemon and eats compressors. It happens about the time...
  3. jbstephenson

    LB7: Mysterious Rattle

    It could be I honestly haven't paid as much attention as I probably should. Is it the shaft itself that is rattling, or a bracket or something like that
  4. jbstephenson

    LB7: Mysterious Rattle

    Don't have traction bars, will have to check the drop bracket tomorrow though
  5. jbstephenson

    LB7: Mysterious Rattle

    Hey guys, sorry this post is going to be a little vague but I'm trying to get all the help I can. I've got 2 mysterious rattling sounds coming from under the truck. One sound like metal on metal, rattles when I go over bumps, etc. but if I apply a little bit of pressure to the brakes and to...
  6. jbstephenson

    LB7: LB7 Starts but will not run

    I pulled the cover back off today, and it looked like a wire had rubbed bare and I guess it shorted out and blew my SEO IGN fuse. Patched the wire up and popped a new fuse in and she's good to go! Thanks for the help guys Sent from my iPhone using Tapatalk
  7. jbstephenson

    LB7: LB7 Starts but will not run

    I had to pull the fuse block cover up but other than that I didn't mess with anything. I pulled the add-a-fuse out and it wont start. But as I mentioned before the sleeves to fit a fuse in that spot aren't there. So lost about my next move and I need my truck this weekend.
  8. jbstephenson

    LB7: LB7 Starts but will not run

    Did some work on the truck today, pulling an old hard wired radar detector power supply out. Truck ran perfectly yesterday and I did this first thing today before I went anywhere. I had the detector wired through an add-a-fuse in the RR WPR fuse spot in the under hood fuse box. Upon removal and...
  9. jbstephenson

    LB7: LB7/LBZ Pedal Assembly Swap

    I have an '03 LB7 and i recently drove my buddies 06 LBZ. His accelerator pedal was much more responsive than mine is and I was wondering if there was a way to swap the assembly into my truck if i bought a used one? Or if there was a way to increase the responsiveness of my pedal. I have to...
  10. jbstephenson

    Rebound leaf spring removal

    Yeah, the overload spring
  11. jbstephenson

    Rebound leaf spring removal

    I'm looked for a way to make the rear end of my truck a little lower and the ride a little smoother without dropping a ton of money into new shocks when they were just replaced less than a year ago. Is the rebound spring that is in the stock rear suspension necessary? it would drop my truck the...
  12. jbstephenson

    LB7: Failing Injectors?

    Yeah it is taking longer to crank...definitely need to get this fixed asap
  13. jbstephenson

    LB7: Failing Injectors?

    Got in the truck later in the day out of need to drive somewhere. Started fine, ran fine, absolutely no smoke at idle and the exhaust didn't smell like raw diesel so i don't know whats going on. I'm going to check the return rates later this week when i've got some free time
  14. jbstephenson

    LB7: Failing Injectors?

    Bought the truck knowing the injectors were going to have to be replaced, but I think that time has finally come. It's blowing white/gray smoke at idle and under heavy acceleration. I have a tuner and now instead of blowing coal its blowing white/gray smoke. I attached some pictures of the...
  15. jbstephenson

    Failed Injectors?

    I bought my lb7 back in december knowing I was going to need to replace the injectors in the near future, and I think they're finally at that point. Its blowing white smoke at idle and under hard acceleration, very little black smoke, and i have a tuner so it would blow coal before.I attached...
  16. jbstephenson

    LB7: K&N Intake Rattle

    I bought my lb7 with the K&N intake already installed. No problem with it, had a K&N on my gasser, but at idle and I assume under acceleration the filter rattles against the metal plate that is under it make a very annoying noise inside the cab. Any ideas on how to fix this? I would post a...
  17. jbstephenson

    Fabtech spindles

    if its the new style narrow fabtech kit would it be a 1.5" spacer?
  18. jbstephenson

    Fabtech spindles

    thats what I was thinking too, guess i'll have to go measure it in the morning
  19. jbstephenson

    LBZ: fuel system unpriming

    my lb7 had a crack in the fuel pump housing, replaced the housing and that was fixed. system stayed primed and I wasn't losing fuel pressure. I didn't see the housing but I was losing a lot of pressure because she was starving for fuel at WOT.
  20. jbstephenson

    Fabtech spindles

    Does anyone know how much the spindles on a 6" fabtech push the front wheels out? I need to order spacers for my rear wheels but I don't know exactly how much more width I need
Top Bottom