Search results

  1. lmmcbrown0917

    Front coil over conversion

    Looking for some info from the guys who have done this or know about it. I want to run coil over shocks bolted in place of my stock shocks, I would like to do this on my racetruck which is stock height with torsion bolts all the way out and I would like it to stay around the same height...
  2. lmmcbrown0917

    LB7: New personal best 6.69 @103 fuel only

    Took the “race” truck out one last time for the year and set some new personal bests. So happy with this truck for what the setup is! Still kicking with a 250k mile stock crank and full stock interior! Looking at options on upgrading the crank for next year so we can really push this thing...
  3. lmmcbrown0917

    LBZ: Redat Injector Nozzles. Anyone running them?

    Anyone running or heard anything about these? I've just noticed they are much cheaper than most other nozzles. Any input of someone running 60% or larger would be appreciated!
  4. lmmcbrown0917

    First GTR kill on the street with the Lb7

    Finally brought the Lb7 out to the street other night, Car was a 2016 Alpha 6 GTR on E85 and a few other bolt ons with drag radials all the way around. Let's see if I added this link correctly.. https://youtu.be/Sz4OTnNrunQ
  5. lmmcbrown0917

    First time out with the new setup at Rudy's!

    Got a couple passes in at Rudy's last weekend with the Lb7, best was a 6.97 @106mph launching very soft. I'm extremely happy with how the truck is doing so far on such a basic setup. Having issues uploading the video for some reason, Also would like to give a big thanks to Evan for the...
  6. lmmcbrown0917

    "12mm" ddp stroker pump? Anybody running it?

    Seems really cheap, never seen anybody running one. Anybody have any info or experience? http://www.dynomitediesel.com/_p/prd1/4556102121/product/lb7-12mm-stroker-cp3
  7. lmmcbrown0917

    LB7: built lb7 wiring/injector issue help needed

    i got the lb7 in my sig put back together with the built motor, I'm running into some issues. the truck will run but only on four injectors. I'm getting P0201, P0206, P0207, P1261 i have already pulled the passenger side valve cover to inspect the injector harness and they seem good, i...
  8. lmmcbrown0917

    LMM: LMM 68stg2R high EGTs, possibly converter?

    About the Lmm in my sig, Egts will get around or over 1100 degrees when driving normal around 1/4 to 1/2 throttle just getting the truck up to speed. it almost feels like the converter is to tight causing the truck to lug, It has a DPC triple disk, stock stall. i don't believe its the...
  9. lmmcbrown0917

    LB7: dual fueler with van thermo housing

    having trouble figuring out how to route the belt on my 02 with dual pumps and the van outlet. if anyone has any info or pics it would be appreciated!
  10. lmmcbrown0917

    LBZ: S468 on lbz y bridge??

    ok so were working on a customers truck that is doing a single 468 on a 7" pedestal is it possible to use a van style modded y bridge and custom cold side pipe? or would there be room to build something that would fit the stock bridge location? the stock bridge would be welded up to keep the...
  11. lmmcbrown0917

    LB7: Max rail psi with dual lb7 cp3s

    So what are two stock lb7 cp3s capable of with lb7 regs? Power and rail psi wise?
  12. lmmcbrown0917

    Dual stock pumps max power with 250%s?

    Ok so like the title says Im trying to figure out what kind of power people have done with dual stock pumps? i plan on doing strokers later on but the budget is getting a little tight with motor build and everything happening at one time. Thanks in advanced guys!
  13. lmmcbrown0917

    Fingersss are here!

    Copy of my parts list, Decided to swap the standard mahles for some fingers ovals! Thanks Jon :thumb: Carrillos 20 over Fingers 16:1 Arp main studs Arp head studs Keyed stock crank Ati dampner Arp flex plate bolts Empire stage 2 AF cam, keyed New OEM oil pump Welded MA water pump...
  14. lmmcbrown0917

    Well that hurt the wallet, Build is ago!!

    Well just bit the bullet and ordered the parts for my lb7 build! Parts list: Carrillos Mahle race cast 16.5:1 0.075 pockets STD bore Arp main studs Arp head studs Keyed stock crank Ati dampner Arp flex plate bolts Empire stage 2 AF cam, keyed New OEM oil pump Welded MA water pump...
  15. lmmcbrown0917

    LBZ: Desired rail pressure all over the place

    Ok, truck is a 06 100% stock with 65k, customer brought it in saying it smokes sometimes and running rough. i checked codes the only ones were 3 glow plug codes, balance rates are in check. When i log it with efi live the Desired rail is all over the place all the way from 130-33,000psi...
  16. lmmcbrown0917

    Machine Shop Prices

    So i stopped by the machine shop today to get a few prices just to have a general idea. He quoted 1800-2000 to do the following... Block: Cleaned, Honed (STD bore), Decked, Cam Bearings, Crank: Magd, Keyed, Heads: Decked, Valve job, Cut for O rings, Fully balanced without assembly, I...
  17. lmmcbrown0917

    Lb7 built bottom end assembly questions.

    I have assembled plenty of gas engines in the past but i know this is a whole different ball game. I have plenty of experience with duramaxs and work on them everyday but I've never torn apart a bottom end, I guess I'm just looking for some advice on some things. what do i need to know as far as...
  18. lmmcbrown0917

    Lb7 p0341 big problems.

    Okay i'll start from the beginning, post referring to the lb7 in my sig. the other night i was driving about a mile from my shop where i was headed, i did a wide open pull from 30mph to around 90mph (top of fourth). everything seemed fine truck felt good like it always does, i came to a stop...
  19. lmmcbrown0917

    LB7: Lb7 p0341 big problems.

    Okay i'll start from the beginning, post referring to the lb7 in my sig. the other night i was driving about a mile from my shop where i was headed, i did a wide open pull from 30mph to around 90mph (top of fourth). everything seemed fine truck felt good like it always does, i came to a stop...
  20. lmmcbrown0917

    LMM: LMM 900-1000hp build

    Almost time to start ordering parts for this motor build. Build list: Bored .020 over Carillos 20 over Mahle cast pistons 16:5 CR, .075 pockets Head studs/Main studs Keyed stock crank Empire stage 2 AF cam, keyed Fluidampr Hamilton valve springs Hamilton push rods Stock heads with...