Recent content by valleyduramax

  1. V

    Replacement rockers/ cab corners

    The rockers I purchased (full outers) are part# RRP1400 and RRP1401.
  2. V

    Replacement rockers/ cab corners

    I got a set of full replacement outer rockers from Rock Auto back in the spring. i do not recall the part number but the thickness of the sheet metal is like double what factory was. My truck is a regular cab and the rockers are off slightly in terms of fit and this is my first time doing this...
  3. V

    Just a smidge more for 4’s

    Is there a build thread or any other general info about this truck? Just curious
  4. V

    New DMGMORI equipment

    DMG is a nice brand for sure! got a couple Monoblocks (65 & 85) at the shop I'm at and a few more mill turns types at the other building. Up in Ontario Canada here!
  5. V

    VGT Remote Oil Feed

    Is there somewhere to put this info so anyone can see such as a "sticky" so can be used for future reference?
  6. V

    VGT Remote Oil Feed

    Alright thanks for the responses! Ill run -6 if that's what the kits sold use!
  7. V

    VGT Remote Oil Feed

    After searching old threads, I still am not sure of oil line size to use for the stock turbo remote feed line. I will have a hydraulic shop make up a new line for me. Do I use -4 or -6 line?
  8. V

    Mike L Shift Springs

    Perfect! Sorry I forgot to mention I'm from Canada so wasn't sure where to go and calling Mike L was the next go to. Ill call DHD! Thanks
  9. V

    Mike L Shift Springs

    I would like to update to these springs as I currently have trans removed from truck and figured now would be the time to do it. Who would I get these from?
  10. V

    Allison 5sp: 01-10 steering box redhead ,PSC ,OEM

    Just curious but when you received the new 6 bolt box, did it come with the pitman arm nut??? Mine did not have one for whatever reason.
  11. V

    Allison 5sp: 01-10 steering box redhead ,PSC ,OEM

    Yep has the paint pen markings on the housing. I am sure those are there as QC when being assembled. Usually to show pieces are torqued or set. I am sure the boxes are brand new units a d quite possibly the exact same box as the PSC just unbranded. Way beefier than stock just by weoght and...
  12. V

    Allison 5sp: 01-10 steering box redhead ,PSC ,OEM

    I got the rock auto 6 bolt cover box from them last summer. It was as described on there site when it showed up. Have not got to try it out yet as truck is still down for engine build but definitely not a factory reman as everyone seems to be getting now even if ordering the upgraded unit.
  13. V

    Factory Frame Wire/hardline clips/brackets

    Does anyone know of where I could get the clips and brackets that hold and locate wiring harness and brake lines to the frame rails? I went kinda crazy with my truck and decided that since the motor was already out and box was off, I may as well remove cab and everything else to sandblast frame...
  14. V

    LML Callies Durastar Crankshaft Issues??

    They are regrinding the thrust face to "true" up the surface. At least that's what we were told from the 2 we had to send back. One is in a running truck now and the other will be up and running within 2 months. We are keeping an eye on the current runner as we are skeptical of the issue being...
  15. V

    Manifold vs headers

    The tubular headers that Randy Overton runs is made by a lad up here in Ontario, Canada. John Gleason is his name. Gleasemanufacturing.com is his website. Sent from my SM-G960W using Tapatalk