Recent content by techperry

  1. T

    Advice for LLY Head Gasket replacement

    What head bolts do yall prefer?
  2. T

    2016 LML Code P0091

    Check engine wiring for rubbing on the a/c lines at the compressor.
  3. T

    Piston protrusion How to figure out what HG thickness to run?

    Grade the gasket on the truck gm measured it so you dont have to. The gasket have holes in a certain position to tell the grade.
  4. T

    Advice for LLY Head Gasket replacement

    Ok well the only gasket that actually say wave stopper cross to the grade D part numbers.
  5. T

    Advice for LLY Head Gasket replacement

    So using the wave stopper that are listed for overbore and decked blocks on everything?
  6. T

    Venturi catch can setup

    From the gm training video it should work amazing to keep oil out of the turbo and intercooler. There seems to be alot of thought put into it. I havent seen L5Ps oil the intercooler boots like older models.
  7. T

    LB7: Possible Stuck PS Pressure Valve?

    If you had a power steering pressure tester yes but if not no.my gut tells me it is still the steering gear. That's what changed when the problem started.
  8. T

    LB7: Possible Stuck PS Pressure Valve?

    I have seen the hydro boosts cause lose of power steering and power brakes.
  9. T

    Rail pressure sensor

    I like the lml sensor. Mainly because I get all I want for free with cp4 failures. Just make sure to clean them when you taking it out of the old rail. Lml will read to 220mpa.
  10. T

    LB7: Daily Driver/Tow Rig Rebuild

    Will the 2020 cooler fit the older engines? What all has to be changed?
  11. T

    Banks DataMonster or Edge CTS2

    Sweet I will hold out for that.
  12. T

    Banks DataMonster or Edge CTS2

    That what I thought. Just wanted to be sure I hadn't missed anything. It looks to be a nice system. I never cared for my cts.
  13. T

    Banks DataMonster or Edge CTS2

    Will the banks work with the 2005 duramax? I haven't been able to find it in supported vehicles.
  14. T

    TCM mounting non factory

    You got a pic of this setup?
  15. T

    TCM mounting non factory

    I am prepping to put the van t-stat housing on mine. So its nice to see one done for the same reason.
See more
Top Bottom