Recent content by rg3whitelbz

  1. rg3whitelbz

    Cons of front locker drag racing

    I don't use mine at the track because if one axle broke, you'd be pushed into the wall or the other lane.
  2. rg3whitelbz

    Failed inspection

    Return to stock or "shop around" is my advice
  3. rg3whitelbz

    Not my day

    Glad you're alright man. Ice is no joke
  4. rg3whitelbz

    Rest in peace Mike (C20ELEPHANT)

    Rip
  5. rg3whitelbz

    Lifting Off Cab

    10-4 thanks! :thumb: Pm'ing you to keep thread on track.
  6. rg3whitelbz

    Lifting Off Cab

    Bumping this back w/ a question. On the 6.4s i've lifted, half the cab cage nuts usually spin even by hand with heat. Is this an issue on our trucks?
  7. rg3whitelbz

    Tips to install new exhaust manifolds and up pipes

    IIRC I did drivers and passenger side turbo uppipe bolts from passenger fender well and drivers manifold uppipe bolts from under the truck with a 12mm 12pt impact swivel. Manifold bolts were 6 point 13 or 14mm but they were no big deal.
  8. rg3whitelbz

    LBZ: Broken glow plug

    Tony Burkhard said in a thread somewhere to weld a nut to the plug and hit medium throttle with a 3/8 battery. It may take several nuts/heat cycles. Worked for me. Sent from my 0PJA2 using Tapatalk
  9. rg3whitelbz

    Weapon light recommendations wanted

    Surefire scout
  10. rg3whitelbz

    Transfer Case Bushing

    10-4 will do
  11. rg3whitelbz

    Transfer Case Bushing

    We should just meetup and figure it out. I'm in Frederick. :thumb: I know there's some kent moore bushing removal tool but the one thread I read said it was about 450 bucks and the guy got the wrong one.
  12. rg3whitelbz

    Transfer Case Bushing

    What's the best method of replacing the transfer case output bushing? Ideally with the back half still attached as I've already done the pump rub kit. Replaced the seal already and it still drips so I was planning to do a new yoke, ujoint, seal, and bushing. Thanks guys. :thumb: FWIW yes I've...
  13. rg3whitelbz

    lly long cranking times

    It's a fair price either way for diagnosis, parts, and labor. You'll spend a lot more finding a different truck to haul your trailer.
  14. rg3whitelbz

    lly long cranking times

    If it needs injectors and even a cp3 at that "broken in" mileage its not the end of the world. Whats your location and can you do it yourself?
  15. rg3whitelbz

    mustang kill, new personal best.

    Mean [emoji23] Sent from my 0PJA2 using Tapatalk
See more
Top Bottom