Recent content by leehype

  1. leehype

    Trans fluid and lack of lockup

    Rodger that To the OP: Sorry for trying to help. To Mike L: Sorry for the misunderstanding.
  2. leehype

    Trans fluid and lack of lockup

    I'm not trying to get into a fight on the internet, just that I read your problem one way, and I think he read it a different way. I also started off with a troubleshooting suggestion, and he attacked my experience. Upping the power would cause more slip, and bypass the lockup, I get that...
  3. leehype

    Trans fluid and lack of lockup

    Guess you didn't understand what I was saying, nor do I think you understand how a lockup converter works. The converter is not "slipping the clutch" right off the bat. It is a turbine, the trans fluid is the working fluid. At a cirtain point, when several conditions are met (these change from...
  4. leehype

    Trans fluid and lack of lockup

    I have read somewhere that there are conditions that must exist for the TC to lock up, one of which was the amount of "slip" in the TC. I'm just guessing here, but after reading your post, I think I am reading that you are thinking the same thing. So if the TC is slipping more as the trans...
  5. leehype

    4" cognito

    Wile I haven't done much on the unibodies, I can attest that my 2500 HD and my TJ are far apart. The Jeep suspension is far more forgiving to the shade tree worker. Keep in mind, a great deal of the front end on most jeeps still in production can interchange parts from 70's models. I wouldn't...
  6. leehype

    RCV performance cv axles

    A buddy of mine runs them on his ranger currently on 43's, but was running them on 46's. %100 no questions asked replacement policy. http://www.youtube.com/watch?v=XpMoR8U8_H0 http://www.youtube.com/watch?v=XpMoR8U8_H0 Absolute 0 U joint phase. http://www.youtube.com/watch?v=Yyy1EV72-wI...
  7. leehype

    the men that built america mini series

    I found it to be a good watch, but there are pieces of information that I know were left out, or ignored. An example was the Eads bridge, the reason it took the shape it did was due to tons of restrictions placed on it. Hight was the second biggest one (first being it could not restrict the...
  8. leehype

    Question: Fuel cell mounts?

    The kit's I'm talking about simply add an access panel that bolts into place. It comes with a tank lid, seal, and bolts. Simple hand tools are used to install it. It also adds more function as you can add fuel pick ups, senders, pumps, or what ever else you might need. My mention of rock...
  9. leehype

    Question: Fuel cell mounts?

    I don't have any experience with fuel cells on these trucks, but from my experience in general, mount it in the most secure fashion you can do. Relocate the pick up's if needed. There are some fittings we use in the rock crawling, you run 2 pick ups, one at ether corner. There are these pickup's...
  10. leehype

    Putting things into perspective

    I did a little RC stuff. Have an RC10GT with a .18 engine destroked to .14 for comp, FM remote, and almost every upgrade possible. Haven't touched it in years. My thing now is rock crawling. I am currently rebuilding my 02 Jeep wrangler, with a tire size of 43". That ain't cheap ether.
  11. leehype

    Look at this gem!

    Don't judge me:joker:
  12. leehype

    Look at this gem!

    I would kill for one of those. Those are sexy!!!
  13. leehype

    Look at this gem!

    Not sure what to make out of it. Kinda looks cool, but the wheels and wittle truck bed are turn off's. Not the worst road tractor body swap I've seen though...
  14. leehype

    Different Battery Relocation

    I bought mine from Napa. As with the cable. Here is a link on amazon. http://www.amazon.com/Tuff-Stuff-WINCH-QUICK-CONNECTOR/dp/B002CEPI5O/ref=sr_1_1?ie=UTF8&qid=1351085181&sr=8-1&keywords=winch+connectors Here is a kit, that comes with the connectors and a winch mount for a 2" reciever...
  15. leehype

    Different Battery Relocation

    Let me just clarify my post a bit, and I think you might like this. I would add connectors, I have done this to my Jeep for my front and rear winches. Run a second set of wires to the batteries and then these. Simply take a set of jumper cables and replace the clips on one side with these...
See more
Top Bottom