Recent content by hhh217

  1. H

    Looking for help with P0335 and P0336

    Hoping to help someone out in the future. This was an intermittent problem and was track down to be the 5 volt reference being pulled down to the crank sensor. The def tank was removed and the connector was getting pack full of snow. The shared 5 volt was getting pulled down that was supposed to...
  2. H

    Looking for help with P0335 and P0336

    Unfortunate I don’t have access to a scope. Going to have to do a little more looking around. Thanks for the reply.
  3. H

    Looking for help with P0335 and P0336

    I had a customer drop off a 2013 LML tuned with no "cooler and valve" on top of the engine, everything else is stock. Out of the blue the truck stalled and set a P0335 crankshaft position sensor circuit. He swapped out crank sensor with a new ac delco sensor. Drove the truck for a few days...
    • hhh217
    • Thread
    • Replies: 4
    • Forum: LML
  4. H

    Kodiak AC configuration

    The new body medium duty trucks started in 2003 or 2004 I think 2003 that offered the duramax. 2002 was the older style cab and didn’t have a duramax.
  5. H

    Kodiak AC configuration

    When I installed a LLY in my 02 truck I went down this road to get the LLY ecm to control the a/c in the truck. https://www.gmupfitter.com/ Check out gm upfitter. They have schematics for the medium duty trucks.
  6. H

    LYY intake horn on LMM turbo?

    The LLY S&B elbow should work for you but I think the inlet diameter is 1/2” smaller where you clamp the intake piping too than the lmm intakes. I have one for sale if you are interested.
  7. H

    LB7 custom 66 turbo failure

    I am looking to get a second opinion on how a situation was handled with one of my customers on a recent job. One of my customers with a LB7 stopped by that needed the injectors replaced. He decided to call up Dans Diesel performance and order new sac 45% injectors, new injector lines...
  8. H

    LBZ: 4WD Conversion

    I have converted 2 trucks to 4wd, factory height with factory brackets. If I can help send me a Pm
  9. H

    lbz loose wires

    Water in fuel sensor wires?
  10. H

    01 S10 2.2L tuning problems

    I first used him with no feedback because he was the only one I could find to set me up with a discontinued medium duty GM Allison tcm and bench flash it. Since then he set me up with my LLY 6 speed conversion file. Real nice guy to deal with. Let us know how it works out.
  11. H

    01 S10 2.2L tuning problems

    https://www.pcmperformance.com/programming.html This guy has done some odd tuning for me in the past. Maybe he can help.
  12. H

    Which T-case to use?

    Does Ben not offer the custom harness to add push button 4wd anymore?
  13. H

    2wd to 4wd swap

    I converted my 2wd 2002 to floor shift 4wd. The swap was pretty straight forward except for cutting all the front diff mounts out of the doner truck and welding them into mine. That part was pretty time consuming. A few of the guys “cheated” and installed a lift at the same time and saves from...
  14. H

    02 LLY swap

    If you get a conversion harness it pretty much the same amount of work as the 03-04 swap. Without that the you might not want to attempt it.
  15. H

    02 LLY swap

    What do you want me to answer? I feel like I am getting beaten up on my truck build thread. I have a working 6 speed made from used Allison parts in my 02 truck with a Custom tune. I believe my valve body is from a LBZ but don’t know for sure. My local trans shop had a used one on the shelf.
See more
Top Bottom