Recent content by gmc502

  1. gmc502

    Got Sludge?

    I searched for the thread,swearing at the customers truck,,,but i didn't find it.lol
  2. gmc502

    Got Sludge?

    what he didn't say was,the truck was a trade in and the used car lot quieted the rod rap w/ gear lube.lol
  3. gmc502

    LML service bulletin

    -don't know the answer,I'm having readiness problem on my 16 and one of them is the NOx sensor not ready.second year in a row for me.it finally sets some time and hope tocatch it so I can pass my inspection. no check engine light or codes.
  4. gmc502

    2016 denali pitman arm nut

    just a quick follow up,1000 miles of highway driving and no leakes or unwanted play..think its gonna go another 4-5 yrs,if I own it that long
  5. gmc502

    2016 denali pitman arm nut

    I was hitting straight up to set the pitman arm then tighten.didn't leak in the 30 miles I drove it home.
  6. gmc502

    2016 denali pitman arm nut

    well,I got it done.I have a fisher plow push plates and a hellwig swaybar.the 10mm headed swaybar bushings weren't budging so it stayed in place. turns out,a little heat and a 1 13/16" crows foot and a big azz breaker bar got the nut off.had to remove 2 power steering box bolts and loosen the...
  7. gmc502

    2016 denali pitman arm nut

    getting ready to change pitman arm.I measured the nut on the steering box and got ~1.840" or betw. 46 and 47mm. does this sound about right? thanks in advance
    • gmc502
    • Thread
    • Replies: 5
    • Forum: LML
  8. gmc502

    Hi new here looking forward to some good info

    just don't ask us for lope or smoke tunes.:ROFLMAO:
  9. gmc502

    anyway to unlock efi live tune

    wouldn't data logging the tune show most of what the tuner did?
  10. gmc502

    Lml 15% throttle in gear

    bad wheel sensor?
  11. gmc502

    TrakMotive XTENDED Travel CV Axles GM-8026XTT 2500HD

    I'll keep this short,,I installed these,first,they are a pita to get in,oem ones come right out or in no tking anything apart.the fatter shaft makes you just about remove the upper control arm,then turn the hubto get it in. now the bad w/oem,I could turn on my driveway,front end didn't like it...
  12. gmc502

    Emissions

    have you put def fluid in it?
  13. gmc502

    More time online

    hey stranger welcome back.looking forward to you solving problems for us.
  14. gmc502

    Are aftermarket leveling kits REALLY worth it?

    on stock wheels.chrome 10 spokes
  15. gmc502

    Are aftermarket leveling kits REALLY worth it?

    I run 35x12.5 20's on a leveled truck,,rubs the hellwig sway bar a little.
See more
Top Bottom