Recent content by $chultz38

  1. $

    05 transmission in 02 truck?

    The bottom line is any '01 to '11 (meaning '10 5 or 6 speed) trans can be made to work in all years with changing- bell housings or using adapter fittings, internal harness, valve bodies, and nsbu switches to fit the truck you are putting the trans into. Yes there are a few year swaps that are...
  2. $

    05 transmission in 02 truck?

    You can buy conversion cooler line fittings. Back in the day they were available from GM
  3. $

    coolant loss

    Stock truck doesn't need head studs like someone said earlier, save yourself some more money and just put new head bolts in it.
  4. $

    Troubleshooting Low coolant on 2016 LML

    More than likely you have head gasket issues if you can't find a leak with a pressure tester. Don't believe me put a rag between the inter fender and the overflow tank at the vent of the tank. Drive the truck as normal and see if you find antifreeze on the rag over time. The fender side...
  5. $

    2014 Camaro SS LML Build Thread

    Might look into a ZL1 hood. I know they are way different and looks to have more room than what you have on it now.
  6. $

    School me on CP3 conversions

    What backflow valve are you taking about?
  7. $

    Putting an 2008 Allison in a 2010 lmm

    What you call engine control harness is that what's on the engine itself? If so that's the same. The ecm/tcm/trans harness is what I call truckside and I am almost positive that 08 09 10 is the same.
  8. $

    5 speed to 6 speed swap?

    Aren't the thread sizes on the fittings different? I know there's something different on the 01 02 fittings.
  9. $

    L5P: Looking for complete tune info.

    What you are asking for isn't talked about openly thanks to EPA actions lately. Try google as what you are wanting you won't find here. Good luck!
  10. $

    5 speed to 6 speed swap?

    Swap valvebody, nabu, internal harness. The tailhousings are the same. Swap the bellhousing or buy the right cooler line fitting adaptors and you are good to go.
  11. $

    Putting an 2008 Allison in a 2010 lmm

    Yep will work just fine. TCM has nothing too do with what you are doing. All 6 speeds 06 to 10 are the "same" or a 5 speed could be used with a few things swapped from you trans. I am saying you don't have to swap the TCM to run the 08 trans in the 10 truck.
  12. $

    LLY to LBZ

    Depending on who you ask most think the lb7/lly crank is better. IMO they all break and one isn't any better than another. Now the LBZ rods, yes better than the LLYs.
  13. $

    LLY to LBZ

    Sure can, just use your LLY reluctor wheel and you are good to go
  14. $

    LML Twins and Opinions

    Or use a emissions intact aftermarket down pipe and plug the holes later.