Recent content by BoostnLLY

  1. BoostnLLY

    Installing connecting rods with motor in truck?

    Well I just ordered PPE manifolds, Up Pipes and DHD Y bridge Kit. Looking at fuel next. I guess if it blows up I’m going LBZ and transferring parts. I don’t want to pull this motor the chassis sucks. Thanks for input
  2. BoostnLLY

    Installing connecting rods with motor in truck?

    Hello guys, I’m getting to a point were the stock rods on my LLY are going to be a limiting factor as horsepower is increasing. I’ve read that, that range can be a measly 550-600hp . After some searching I wasn’t able to find duramax specific answers so My question is, can a set of Mahle rods...
  3. BoostnLLY

    Need part number for coolant tube - picture inside

    Thanks brother that’s it!!
  4. BoostnLLY

    Need part number for coolant tube - picture inside

    Hello guys, got the new head gaskets on, water pump, oil cooler , etc. everything is great but this pesky little tube has a small build up of coolant around it intermittently. I had found what I thought was the part number in a Facebook post and ordered it. Definitely the wrong part although...
  5. BoostnLLY

    Truck seems very labored when backing up trailer

    Thanks Guys. It was a defective 5 Prong Trailer Plug That was newer.
  6. BoostnLLY

    Truck seems very labored when backing up trailer

    Let me look at my trailer plug adapter. Thanks guys
  7. BoostnLLY

    Truck seems very labored when backing up trailer

    I’m going to try disconnecting the 5 flat trailer plugs first. The trailer has what I’ve always thought was called, a “brake away” cable that activates if the trailer disconnects... here’s a picture of the tongue. Edit: just learned the surge actuator is under the tongue and looks to me that...
  8. BoostnLLY

    Truck seems very labored when backing up trailer

    I think I might have a bad brake controller. Going to have to test tomorrow although I’ve never experienced this on my utility trailer
  9. BoostnLLY

    Truck seems very labored when backing up trailer

    Today I pulled a 24’ sea ray back to my House to clean it up for vacation. (This is my first time towing this boat and using this truck to tow this boat also.) as I was backing up the trailer, it seems like almost like the trailer brakes or something was engaged and felt like it took a lot of...
  10. BoostnLLY

    LB7: Dampener

    When my LLY went in for head gaskets , I was kinda laughed at when I wanted to do the pin kit and fluidampr HB as preventative maintenance. I did it anyways. Read way too many horror stories of failed cranks. The pin was only worn a couple thousands with 200k on the dot. I entertained the idea...
  11. BoostnLLY

    05 LLY Sleeper Build

    Lol most definitely. Didn’t know they didn’t that
  12. BoostnLLY

    05 LLY Sleeper Build

    You ran 11.3 quarter mile with the skid steer? Alex
  13. BoostnLLY

    LLY Oil Cooler..Again

    Hello guy, just updating the thread for research purposes. I got the cooler installed, not the cleanest but would like to touch up painting but you get the idea. I did not shroud it either. The truck has a 3” body lift so I went into the old belly ban bolt holes. I always watch my gauges and...
  14. BoostnLLY

    LLY Oil Cooler..Again

    Ok I’ll order one. Definitely missed! Sorry . Moral got back to me they accidentally sent me a 3/4” extension . No problem it’s on the way
  15. BoostnLLY

    LLY Oil Cooler..Again

    Does anyone know the size of the drain plug on the FLD-DB30618 Fluidyne Oil Cooler? I tried a M20 x 1.5 and it threads nicely about a quarter of an inch then gets real tight. I went to try a standard 3/4 and definitely doesn’t fit Alex
See more
Top Bottom