Recent content by 04chase

  1. 0

    01-10 steering box redhead ,PSC ,OEM

    i just installed another one about 4 months ago and big difference . 38" tires on a big lifted truck and it did wonders. also did the lml booster and new oem pump. This was the 6 bolt from PSC . didnt take long to get at all.
  2. 0

    losing prime

    not sure if you know what the filters are rated at but it is not the same ac delco oem filter is 10 micron rated by itself , fass filters 10 micron on the separator and 5 micron on the filter followed by the high ef cat filter in stock location is down to 2 micron. To each his own but...
  3. 0

    losing prime

    IMO cat in stock location and fass with water separator and filter is far superior to stock . for your issue , sounds like your sucking air and common spot for that is the primer pump. Could easily just repair/replace that and continue on with life.
  4. 0

    Hole in One Rain Delay

    it is a bit happy gilmore ish but also remember . this is the WM open , not the masters. The opening at 6am should have signaled the shenanigans. Also Az is the biggest college golf town in the u.s. . I agree with the above , the current generation plays golf a bit less conservative. now at...
  5. 0

    Time for injectors stock or 30 overs?

    How would .030 overs run in a truck with a stock tune? Besides being fuel heavy would the truck trip a light? Sent from my SM-G981U using Tapatalk
  6. 0

    Time for injectors stock or 30 overs?

    Exactly what I'm referring to. https://www.sema.org/news-media/enews/2021/28/california-smog-inspectors-check-illegally-tuned-vehicles Started just after your smog it would appear. Sent from my SM-G981U using Tapatalk
  7. 0

    Time for injectors stock or 30 overs?

    Ok some of you may not know calis new rules. The factory tune has to be in. Nothing changed at all, not even tire size. They now check for oem software cal i.d. in the ecm. So if all components still pass but the #s don't match the stock calibration , it fails. No ways around this either...
  8. 0

    Time for injectors stock or 30 overs?

    Noticed injector 4 nearing +6% on hot idle in gear . No noticeable negative performance or excess haze. Mods currently are stock engine with the basic bolt ons Intake/turbo back exhaust Manifolds Fass 165 /sumped and shimmed rail Danville 3794 stg 2 Stock injectors Stock engine 125k Mike l...
    • 04chase
    • Thread
    • Replies: 17
    • Forum: LBZ
  9. 0

    brake upgrade gmt-800 lbz

    They are much bigger hence the 16" rotors. I also have a 18 vector blue cts v too so easy to compare. Did some measurments though and the thickness isn't going to work. The stock lbz rotors are about 30% thicker tha. the oem 6 piston/ 16" rotors on the 15+ gm 1/2 tons. I'll just sell this...
  10. 0

    brake upgrade gmt-800 lbz

    The calipers I'm using are brembo 6 piston for 16" rotors Sent from my SM-G950U using Tapatalk
  11. 0

    brake upgrade gmt-800 lbz

    Does anyone know of any larger rotors for the 01-10 8 lug trucks ? im looking for 16" or as close as possible. I know wilwood has a kit with rotors that size but would prefer a more budget friendly 1 piece. Reason being is i have a set of the newer gm 1/2 ton brembo calipers ( kits sold from...
  12. 0

    What did you do at work today?

    Having fun fixing the damage from a failed u joint. Tcm is fixed but now removing the trans and bell housing is going to be fun since it is the rear engine support. internationals are ........ piece of .... Sent from my SM-G950U using Tapatalk
  13. 0

    New thought on Onboard Welder

    very cool man. 7018 FTW
  14. 0

    10 speed variance

    Mike thank you. Exactly the answer I couldnt find. I have 2 partners that just got 20 5500 and 6500s for service truck duty. In 4wd single cab. Both coming from current gen ram 5500. I like the gm drivetrain and chassis better. Turn radius sucks and ride quality is similar. Dislike the small...
  15. 0

    10 speed variance

    trying to educate myself a bit on the new 10 speeds. Ford and gm worked together to design the newish allison 10l1000 . The 10 speed found in the LD gm lineup including the cars/trucks as the 10l90 . Ford has the 10 speed in the 2020 1.5 and 2 ton trucks but gm still pushing the allison 6 speed...
See more
Top Bottom