Allison 6sp: Stage 4 build [Archive] - Duramax Diesels Forum

PDA

View Full Version : Allison 6sp: Stage 4 build


Shieldsinc
05-13-2012, 01:34 PM
Hey mike. Im wanting to do a stage 4 build. I already have the transgo jr and am ordering the boost valve. I also have my buddy's machine shop cutting me a spacer washer for behind the valve. My question is what else do I need (besides converter). Do I need to get a alto master rebuild kit w all 5 clutches or just the c3-c4 clutches. Thanks for the help.

Slammed2007Lbz
05-13-2012, 01:55 PM
:popcorn:

MACKIN
05-13-2012, 03:38 PM
:popcorn:


What are you drinking with your pop corn?

JRODS*LB7
05-13-2012, 03:42 PM
:nothingtoadd:

LWATSON
05-13-2012, 05:33 PM
I know this is a stupid question but I'm going to ask it anyway. Why not just buy a kit from Mike?

BLKLMM
05-13-2012, 06:11 PM
X2^^^also your best bet is to call;)

Mike L.
05-13-2012, 07:18 PM
Hey mike. Im wanting to do a stage 4 build. I already have the transgo jr and am ordering the boost valve. I also have my buddy's machine shop cutting me a spacer washer for behind the valve. My question is what else do I need (besides converter). Do I need to get a alto master rebuild kit w all 5 clutches or just the c3-c4 clutches. Thanks for the help.

Seems you and your machinist have it handled. Go for it.:D

Shieldsinc
05-13-2012, 07:37 PM
My best friend ownes a transmission shop so I get the parts at cost and free labor to put it together. But like me he dnt know the exact parts that go in a stage 4 or 5 kit.

AubleAK
05-13-2012, 07:54 PM
My best friend ownes a transmission shop so I get the parts at cost and free labor to put it together. But like me he dnt know the exact parts that go in a stage 4 or 5 kit.

Make it easy for yourself and order a complete kit.

Shieldsinc
05-13-2012, 08:07 PM
Where can I find one of his kits. I looked at ingkewood trans but didn't fing anything.

Slammed2007Lbz
05-13-2012, 08:10 PM
Make it easy for yourself and order a complete kit.

X2 you better call Mike L or your next thread on here will be " Please Help" my trans won't shift and is stuck in reverse because it wasn't installed with the proper parts needed. By the sounds of your description you or your trans builder have NO knowledge on a allison 1000 trans. Not being a dick here but you need to call a tranny builder that builds this any figure some things out because you are soooooo far out of reach its not even funny! AGAIN NOT TRYING TO BE A DICK but give mike l a call and he will steer you in the right direction:thumb:

SoCalMike
05-13-2012, 08:13 PM
Where can I find one of his kits. I looked at ingkewood trans but didn't fing anything.


you need to call him. http://inglewoodtransmission.com/jm/index.php/contact-us

order the kit from mike and you will get the support you need.:thumb:

Shieldsinc
05-13-2012, 08:45 PM
Thanks man.