just rebuild fuel filter head on my 2004 Silverado 2500 hd.while trying to pump fuel all I get out of bleeder screw is foamy fuel.can any body help and lead me in rite direstion to resolve this matter.
fuel pump
- Thread starter swampthing44
- Start date
truk wont start with this foamy fuel.before rebuild truck ran well.every once in a while it would cut of id go and pump primer a few times and it would start.so I rebuilt fuel filter head and now I'm having foamy fuel when I pump primer come out of primer bleeder screw.does anyone know whats wrong........
Stop with the rebuild kits, they are garbage. Get an lbz filter head, get some fuel line from oreillys to plumb it and then prime it.
2004 Silverado Cali lb7, Airdog ll 165, fresh sticks at 325k, DSP 5 on v2 by Rick Fletes, 33x12.5 nittos at on 20 inch American Racing wheels, modded factory air box, Profab Intake Horn, Batmo Wheel, Turbo port and polish, Full EGR Removed w/ fed belt, 3.5 inch MBRP Downpipe, Full five inch MBRP Exhaust, 10mm lbz cp3 pump, Dual Yellow Top Optimas, High Output Alternator, Cognito Pittman and idler w/ support kit, Cognito Contol arms, Drilled and Slotted Rotors on all four Corners, Custom Y Bridge.
2004 Silverado Cali lb7, Airdog ll 165, fresh sticks at 325k, DSP 5 on v2 by Rick Fletes, 33x12.5 nittos at on 20 inch American Racing wheels, modded factory air box, Profab Intake Horn, Batmo Wheel, Turbo port and polish, Full EGR Removed w/ fed belt, 3.5 inch MBRP Downpipe, Full five inch MBRP Exhaust, 10mm lbz cp3 pump, Dual Yellow Top Optimas, High Output Alternator, Cognito Pittman and idler w/ support kit, Cognito Contol arms, Drilled and Slotted Rotors on all four Corners, Custom Y Bridge.
