Duramax Diesels Forum Truck of the Week
  #1  
Old 02-15-2016, 08:04 PM
ikeG's Avatar
ikeG ikeG is offline
Oughta Know Better
 
Join Date: Apr 2011
Location: Western PA
Posts: 1,805

Default Seriously?

I see a lot of sketchy stuff coming through here and i send a lot pic of a lot of it to a buddy (05_LLY on here). He joked that i should start a blog of what all i see but this is as close to a blog as ill ever get. I'll post some pics and stories and see what you guys have come across too.
__________________
Isaac Griffith, formerly 04jimc
03 Chev CC SB ZF6-Gone
04 GMC CC SB SLT LLY
597/1096 Batmostocker-Gone

06 GMC CC DRW-Gone
08 GMC CC DRW-Gone
New DD/Beater: Beat up 06 GMC CCSB w/ 252,000 miles
Current Tow Rig-12 Ram 4500 Crew


'Oughta K
now Better'- PPL Lim Pro Stock 05 3500 Crew Cab 158" WB 2014 PPP 2.6 Champions
Thanks to Blackout Performance

Reply With Quote
  #2  
Old 02-15-2016, 08:13 PM
WVRigrat05's Avatar
WVRigrat05 WVRigrat05 is offline
Wound for sound
 
Join Date: Jan 2011
Location: French Creek, West Virginia
Posts: 2,858

Default

I'm in.
__________________
Reger
05' Black Chevy CC/SB LT- Blackout Performance built motor/trans/tuning- Gone

The Blessed Hellride- 08' White GMC Sierra SLT CC/SB,
100k miles. Piston eater.

Wife's ride- 2016 Pearl white Legacy limited 3.6R

Rig ride/new DD-02' Black Eddie Bauer explorer 4.6, -180k, still sporting original trans, outlasted two Duramaxs.
Reply With Quote
  #3  
Old 02-15-2016, 08:15 PM
ikeG's Avatar
ikeG ikeG is offline
Oughta Know Better
 
Join Date: Apr 2011
Location: Western PA
Posts: 1,805

Default

This 08 Ram 2500 just came in. The exhaust was quite spectacular. This custom super scavenging exhaust went to a stack in the bed that was not fastened to the bed at all, just flopping around. There wasnt a single hanger except that broken one you see back at the u-bend, the pipe was just laying on the trans crossmember and the one attempted hanger was rusted off. It used to be attached to a bed crossmember via self tapping screws. There were also a few burn holes in the piping where they apparently tried welding hangers directly to the tubing with a stick welder.

The other wild thing was that the LF caliper was missing one of its bracket bolts, the one that was there was loose. So the caliper was slowly grinding away at the inside of the rim. Was sure to cause a catastrophe later down the road...
Attached Images
File Type: jpg IMG_20160205_115204952.jpg (130.9 KB, 909 views)
File Type: jpg IMG_20160206_094553526.jpg (171.2 KB, 874 views)
File Type: jpg IMG_20160205_130630109.jpg (142.4 KB, 839 views)
__________________
Isaac Griffith, formerly 04jimc
03 Chev CC SB ZF6-Gone
04 GMC CC SB SLT LLY
597/1096 Batmostocker-Gone

06 GMC CC DRW-Gone
08 GMC CC DRW-Gone
New DD/Beater: Beat up 06 GMC CCSB w/ 252,000 miles
Current Tow Rig-12 Ram 4500 Crew


'Oughta K
now Better'- PPL Lim Pro Stock 05 3500 Crew Cab 158" WB 2014 PPP 2.6 Champions
Thanks to Blackout Performance

Reply With Quote
  #4  
Old 02-15-2016, 08:19 PM
Potthoffdmax's Avatar
Potthoffdmax Potthoffdmax is offline
Hotrodder
 
Join Date: Mar 2010
Location: Kingman az
Posts: 457

Default

Nice!!
__________________
EFI live, ARP Studs, shim kit, Afe stage 2 intake, Air Dog 150, Exhaust 4inch, MikeL trans , Autometer gauges, DHD Centerlink Brace, Dmaxstore Tie Rods, pump rub fix.

2017 wrx six speed..
Reply With Quote
  #5  
Old 02-15-2016, 08:21 PM
WVRigrat05's Avatar
WVRigrat05 WVRigrat05 is offline
Wound for sound
 
Join Date: Jan 2011
Location: French Creek, West Virginia
Posts: 2,858

Default

Hey man, he was a baller on a budget, lol. What a turd.
__________________
Reger
05' Black Chevy CC/SB LT- Blackout Performance built motor/trans/tuning- Gone

The Blessed Hellride- 08' White GMC Sierra SLT CC/SB,
100k miles. Piston eater.

Wife's ride- 2016 Pearl white Legacy limited 3.6R

Rig ride/new DD-02' Black Eddie Bauer explorer 4.6, -180k, still sporting original trans, outlasted two Duramaxs.
Reply With Quote
  #6  
Old 02-15-2016, 08:29 PM
ikeG's Avatar
ikeG ikeG is offline
Oughta Know Better
 
Join Date: Apr 2011
Location: Western PA
Posts: 1,805

Default

Just traded a 07 tahoe that had a rough country leveling kit. Must of came with new bolts or they might have sourced their own longer ones, but either way the bolts through the spacer that hold the strut to the lower control arm were way too long and had been grinding away at the shaft part of the front axles. Like a lathe. They also put the battery in backwards and couldnt figure out why the pos and neg cables wouldnt reach. Instead of noticing the battery needed spun 180* in its tray, they tore each cable out of its retainers and clips and MADE them reach the terminals in the wrong spots! Makes me wander if they probably hooked battery up wrong first.
__________________
Isaac Griffith, formerly 04jimc
03 Chev CC SB ZF6-Gone
04 GMC CC SB SLT LLY
597/1096 Batmostocker-Gone

06 GMC CC DRW-Gone
08 GMC CC DRW-Gone
New DD/Beater: Beat up 06 GMC CCSB w/ 252,000 miles
Current Tow Rig-12 Ram 4500 Crew


'Oughta K
now Better'- PPL Lim Pro Stock 05 3500 Crew Cab 158" WB 2014 PPP 2.6 Champions
Thanks to Blackout Performance

Reply With Quote
  #7  
Old 02-15-2016, 08:33 PM
ikeG's Avatar
ikeG ikeG is offline
Oughta Know Better
 
Join Date: Apr 2011
Location: Western PA
Posts: 1,805

Default

Check out the custom wiring job for the inoperable glow shift gauges in this LMM. What to do with extra boost gauge tubing?? Just pack it all in a wad and wrap around your brake pedal! Bada bing

It also had some junk homemade CAI that i regrettably did not take a picture of and it went in the dumpster. Cant remember the exact details on it.
Attached Images
File Type: jpg IMG_20150910_072823227.jpg (142.5 KB, 778 views)
File Type: jpg IMG_20150910_093356846.jpg (126.3 KB, 741 views)
__________________
Isaac Griffith, formerly 04jimc
03 Chev CC SB ZF6-Gone
04 GMC CC SB SLT LLY
597/1096 Batmostocker-Gone

06 GMC CC DRW-Gone
08 GMC CC DRW-Gone
New DD/Beater: Beat up 06 GMC CCSB w/ 252,000 miles
Current Tow Rig-12 Ram 4500 Crew


'Oughta K
now Better'- PPL Lim Pro Stock 05 3500 Crew Cab 158" WB 2014 PPP 2.6 Champions
Thanks to Blackout Performance

Reply With Quote
  #8  
Old 02-15-2016, 08:48 PM
elliottw's Avatar
elliottw elliottw is offline
Hotrodder
 
Join Date: Jan 2013
Location: ND
Posts: 383
Default

Quote:
Originally Posted by 04jimc View Post
Just traded a 07 tahoe that had a rough country leveling kit. Must of came with new bolts or they might have sourced their own longer ones, but either way the bolts through the spacer that hold the strut to the lower control arm were way too long and had been grinding away at the shaft part of the front axles. Like a lathe. They also put the battery in backwards and couldnt figure out why the pos and neg cables wouldnt reach. Instead of noticing the battery needed spun 180* in its tray, they tore each cable out of its retainers and clips and MADE them reach the terminals in the wrong spots! Makes me wander if they probably hooked battery up wrong first.
I've seen the leveling kit lathe too, they never understand why their cv's are wrecked and ball joints are shot either. This last one had both the swaybar end links broken off as well.
__________________
2009 LMM- DSP5 by ATP, supporting mods SOLD
2005 LLY- DSP5, built tranny, supporting mods SOLD
2007 LBZ- Moonshine DSP5, supporting mods
Reply With Quote
  #9  
Old 02-15-2016, 08:50 PM
WVRigrat05's Avatar
WVRigrat05 WVRigrat05 is offline
Wound for sound
 
Join Date: Jan 2011
Location: French Creek, West Virginia
Posts: 2,858

Default

Like a Craigslist add, "minor electrical issues". My LLY had a shitty intake, it started out a new bills custom intake, then became a Reger's keep it together intake, it broke like 4 times, from the motor flexing so much with busted motor mounts on the first motor. I was always gonna replace it but never remembered to order another one.
__________________
Reger
05' Black Chevy CC/SB LT- Blackout Performance built motor/trans/tuning- Gone

The Blessed Hellride- 08' White GMC Sierra SLT CC/SB,
100k miles. Piston eater.

Wife's ride- 2016 Pearl white Legacy limited 3.6R

Rig ride/new DD-02' Black Eddie Bauer explorer 4.6, -180k, still sporting original trans, outlasted two Duramaxs.
Reply With Quote
  #10  
Old 02-15-2016, 09:57 PM
bmc1025 bmc1025 is offline
Hotrodder
 
Join Date: Jan 2013
Location: Big Bone, KY
Posts: 511
Default

Quote:
Originally Posted by elliottw View Post
I've seen the leveling kit lathe too, they never understand why their cv's are wrecked and ball joints are shot either. This last one had both the swaybar end links broken off as well.
You guys are about to make me go outside in the cold darkness to check my wife's Tahoe. I hope I'm not one of those hacks. I did at least use longer swaybar end links
__________________
98 C3500HD 6.5TD
03 Chevy 3500 CC Dually
06 GMC 3500 CC Dually
Reply With Quote
  #11  
Old 02-15-2016, 10:24 PM
NC-smokinlmm's Avatar
NC-smokinlmm NC-smokinlmm is offline
<<<Future tuna killer
 
Join Date: May 2011
Location: At Da Beach
Posts: 3,650
Default

You should see some of the boats I get on! Owner installed and maintained...


Keeps me busy...
__________________
2010 GMC 1500 SCSB Denali Clone < lifted 22's/33's, Kooks, Magnaflow, 5.3, 6l80, TVS1900, lots of boost, Mayhem tuned, etc...

2015 Corvette Stingray Z 51 < Stock...

2016 LML CCSB Denali < Lifted 22's/35's, Fox 2.0 < I officially need help.
Reply With Quote
  #12  
Old 02-15-2016, 10:27 PM
chevyburnout1's Avatar
chevyburnout1 chevyburnout1 is offline
Fixing it till it breaks
 
Join Date: Aug 2008
Location: Berthoud, CO
Posts: 2,354
Default

OMG if we're starting a thread like this I need to start taking some pictures at work!
__________________
Dustin

'03 Silverado LB7
GT3788/CT6x88mm compounds _ 60's _ duals _ fingers _ 6480af _ some tuning...
'77 K-10
52"/56" front/rear leaf springs and rear shackle flip: 8" lift total _ D60/14blt 4:56s _ 40" Swamper IROK's _ 383 w/nitrous _ SM465 _ 208tcase
'97 Cadillac Deville
Morimoto Mini 5000k projector headlight conversion _ 500watts in the trunk _ 20's _ Flowmasters _ Tuned ECM _ Rear mount turbo in the works....
Reply With Quote
  #13  
Old 02-15-2016, 10:31 PM
baggedLB7's Avatar
baggedLB7 baggedLB7 is offline
Goer
 
Join Date: May 2011
Location: Utah
Posts: 619

Default

Want to talk about wiring.
Toggle switches are expensive so just tape the broken one back together and just wrap the wires around the terminals the switch worked sometimes. The two wires for the alternator were taped together like that with nothing separating the stripped wires. The red wires are hot and were found like that under the dash and I found it because I could hear it sparking while driving down the road. And one of my favs I'm told It doesn't overheat while idling but when you start driving it the temp just shoots up to hot. Yes that is the temp sender sitting against the header.
Attached Images
File Type: jpg 20150603_193648.jpg (96.8 KB, 599 views)
File Type: jpg 20150603_194107.jpg (88.5 KB, 576 views)
File Type: jpg 20150604_214749.jpg (121.2 KB, 565 views)
File Type: jpg 20150607_140618.jpg (133.7 KB, 574 views)
File Type: jpg 20150605_225322.jpg (90.0 KB, 562 views)
__________________
TIM
2004 LB7 CCLB, 4" Straight Pipe, Edge Insight, AirDog 165, EFI, StagelV Trans, Twins.

Trans and Twins by EPR
Reply With Quote
  #14  
Old 02-15-2016, 10:43 PM
chevyburnout1's Avatar
chevyburnout1 chevyburnout1 is offline
Fixing it till it breaks
 
Join Date: Aug 2008
Location: Berthoud, CO
Posts: 2,354
Default

I grabbed a picture of this one that came in today. I have never seen such a funky IFS lift setup. Like maybe it was the first one ever to come out. But it literally rubs on the sidewall of the tires! And they drove it like that! And to top it the truck was literally one of the most scariest trucks I've driven. Death wobble above 45mph, brakes beyond metal to metal, tires worn passed the threads, brake lines stretching and cracking. And having to blow in a disgusting breathalyzer at the same time which the customer conveniently didn't have any extra mouthpieces.

__________________
Dustin

'03 Silverado LB7
GT3788/CT6x88mm compounds _ 60's _ duals _ fingers _ 6480af _ some tuning...
'77 K-10
52"/56" front/rear leaf springs and rear shackle flip: 8" lift total _ D60/14blt 4:56s _ 40" Swamper IROK's _ 383 w/nitrous _ SM465 _ 208tcase
'97 Cadillac Deville
Morimoto Mini 5000k projector headlight conversion _ 500watts in the trunk _ 20's _ Flowmasters _ Tuned ECM _ Rear mount turbo in the works....
Reply With Quote
  #15  
Old 02-15-2016, 11:38 PM
Burn Down's Avatar
Burn Down Burn Down is offline
Hotrodder
 
Join Date: Sep 2008
Location: Boise Idaho
Posts: 6,220

Default

Quote:
Originally Posted by chevyburnout1 View Post
I grabbed a picture of this one that came in today. I have never seen such a funky IFS lift setup. Like maybe it was the first one ever to come out. But it literally rubs on the sidewall of the tires! And they drove it like that! And to top it the truck was literally one of the most scariest trucks I've driven. Death wobble above 45mph, brakes beyond metal to metal, tires worn passed the threads, brake lines stretching and cracking. And having to blow in a disgusting breathalyzer at the same time which the customer conveniently didn't have any extra mouthpieces.

F-that... I would have told the boss to blow me.... I ain't working on that mofo
__________________
04.5 CCSB ole blue, built trans, mpi twins
03 Reg Cab ZF 6
05 CCSB ole crappy, built eng, built trans, mpi twins
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -7. The time now is 01:51 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vB.Sponsors