Duramax Diesels Forum Truck of the Week
  #1  
Old 01-01-2015, 07:08 PM
Fingers's Avatar
Fingers Fingers is offline
Village Idiot
 
Join Date: Apr 2008
Location: White Oak, PA
Posts: 1,605
Default Another Piston Set

I have a set of Standard bore 16.5:1 cast ovals without reliefs on the shelf that I want gone.

First $1975 takes them and I'll include ground shipping to the lower 48.
__________________
But.....What do I know.

'04.5 EC/LB 4x4.
Howard Rods w/ oiler hole.
Oval Chambers and valve reliefs cut in Mahle Cast Pistons. 17.5:1
SoCal Stage 2 heads, 3388 Cam, Billet Flywheel, and harmonic balancer.
Danville 68mm VVT Turbo
100 over injectors.
PPE Dual CP3s
ProFab Castflow headers and uppipes.
100 PSIA MAP Sensor
Kennedy dual lift pump.

Dynoed 690 HP / 1200 TQ
  #2  
Old 01-01-2015, 08:22 PM
LBZ's Avatar
LBZ LBZ is offline
Super Moderator
 
Join Date: Jul 2007
Location: Ontario
Posts: 9,892

Default

Trade you for some stock bore Mahle Cast Race no reliefs.
  #3  
Old 01-01-2015, 10:11 PM
Frankin_truck's Avatar
Frankin_truck Frankin_truck is offline
Hotrodder
 
Join Date: Nov 2013
Posts: 146
Default

If they had VR I would take them
__________________
2007.5 lmm, Built motor, Built trans, Danville 72vgt over 484, 100 overs, dual cp3's and so on..........
  #4  
Old 01-01-2015, 10:35 PM
Fingers's Avatar
Fingers Fingers is offline
Village Idiot
 
Join Date: Apr 2008
Location: White Oak, PA
Posts: 1,605
Default

They can be added, but it will reduce the CR between 0.25 and 0.50
__________________
But.....What do I know.

'04.5 EC/LB 4x4.
Howard Rods w/ oiler hole.
Oval Chambers and valve reliefs cut in Mahle Cast Pistons. 17.5:1
SoCal Stage 2 heads, 3388 Cam, Billet Flywheel, and harmonic balancer.
Danville 68mm VVT Turbo
100 over injectors.
PPE Dual CP3s
ProFab Castflow headers and uppipes.
100 PSIA MAP Sensor
Kennedy dual lift pump.

Dynoed 690 HP / 1200 TQ
  #5  
Old 01-02-2015, 05:42 AM
Bonestock's Avatar
Bonestock Bonestock is offline
Hotrodder


 
Join Date: Aug 2010
Location: Worland Wy
Posts: 1,341

Default

Trades? I have a 63 Billet Cheetah and cash.
__________________
The LMM -Limitless Built Trans -Suncoast 1054 Converter - DHD Lockup Controller -Exergy Sportsman Cp3 - Airdog 165 -Stock Turbo - Stock Fuel -EFI DSP5 PPEI Tuning. *sold*

The LB7 -Limitless Built Trans 6 Speed Drum - Precison ML Converter - DHD Lockup Controller - Fass 150 - Stock Turbo - Stock Fuel - EFI DSP5 Tuning by me.

16 Denali......Stock for now.
  #6  
Old 01-02-2015, 07:58 AM
Moneywellspent's Avatar
Moneywellspent Moneywellspent is offline
Hotrodder
 
Join Date: Dec 2013
Location: Idaho
Posts: 228
Default

pm sent
__________________
Low and slow built LBZ | Big single| SSDT Dsp5
  #7  
Old 01-04-2015, 08:29 PM
Fingers's Avatar
Fingers Fingers is offline
Village Idiot
 
Join Date: Apr 2008
Location: White Oak, PA
Posts: 1,605
Default

Still available.
__________________
But.....What do I know.

'04.5 EC/LB 4x4.
Howard Rods w/ oiler hole.
Oval Chambers and valve reliefs cut in Mahle Cast Pistons. 17.5:1
SoCal Stage 2 heads, 3388 Cam, Billet Flywheel, and harmonic balancer.
Danville 68mm VVT Turbo
100 over injectors.
PPE Dual CP3s
ProFab Castflow headers and uppipes.
100 PSIA MAP Sensor
Kennedy dual lift pump.

Dynoed 690 HP / 1200 TQ
  #8  
Old 01-05-2015, 03:36 AM
Hot COCOAL Hot COCOAL is offline
May the farce be with you
 
Join Date: Jun 2012
Posts: 4,434

Default

hmm
I wonder what the cylinder bore size is on this GM reman I have???

I would love to have these
__________________
Jason-
Founding member of the "knows enough to be dangerous" club...
Hey, I'm NORWEGIAN... you try having a SQUARE head full of ROUND thoughts...
  #9  
Old 02-09-2015, 01:24 PM
Fingers's Avatar
Fingers Fingers is offline
Village Idiot
 
Join Date: Apr 2008
Location: White Oak, PA
Posts: 1,605
Default

These Pistons are still available.

$1900 Shipped to the lower 48.
__________________
But.....What do I know.

'04.5 EC/LB 4x4.
Howard Rods w/ oiler hole.
Oval Chambers and valve reliefs cut in Mahle Cast Pistons. 17.5:1
SoCal Stage 2 heads, 3388 Cam, Billet Flywheel, and harmonic balancer.
Danville 68mm VVT Turbo
100 over injectors.
PPE Dual CP3s
ProFab Castflow headers and uppipes.
100 PSIA MAP Sensor
Kennedy dual lift pump.

Dynoed 690 HP / 1200 TQ
  #10  
Old 02-09-2015, 01:31 PM
clrussell's Avatar
clrussell clrussell is offline
pro-procrastinator
 
Join Date: Sep 2013
Posts: 4,889
Default Another Piston Set

Hmmm this set is tempting! Disregard the pm I sent asking if you still had these.. Looks like you do!
__________________
17 GMC all terrain L5P, stock with dark windows

07 crew long classic- stolen
.
  #11  
Old 03-08-2015, 06:55 PM
Fingers's Avatar
Fingers Fingers is offline
Village Idiot
 
Join Date: Apr 2008
Location: White Oak, PA
Posts: 1,605
Default

Still available.
__________________
But.....What do I know.

'04.5 EC/LB 4x4.
Howard Rods w/ oiler hole.
Oval Chambers and valve reliefs cut in Mahle Cast Pistons. 17.5:1
SoCal Stage 2 heads, 3388 Cam, Billet Flywheel, and harmonic balancer.
Danville 68mm VVT Turbo
100 over injectors.
PPE Dual CP3s
ProFab Castflow headers and uppipes.
100 PSIA MAP Sensor
Kennedy dual lift pump.

Dynoed 690 HP / 1200 TQ
  #12  
Old 03-08-2015, 07:03 PM
JRODS*LB7's Avatar
JRODS*LB7 JRODS*LB7 is offline
Hotrodder

 
Join Date: Feb 2012
Location: SE Massachusetts
Posts: 643

Default

I know you said the reliefs can be added , is that an extra charge ? id like to get these of of you im just waiting on the machine shop to confirm if I need to bore or not. im looking to go with a cam similar to the 6480 af cam wich iirc need a 075 valve relief . Would this be the right cr to go with ? My setup consist of a 4094 vvt machined 71.5 over s483,100 over injectors, id like to still have the ability to tow if needed
__________________
06 ccsb
efi live dsp5 BT tunes
4"mbrp
Airdog 165
Built Trans (BT DW)
20x12 -44 off fuel Hostages
Rancho 9000 xl
  #13  
Old 03-08-2015, 08:08 PM
Fingers's Avatar
Fingers Fingers is offline
Village Idiot
 
Join Date: Apr 2008
Location: White Oak, PA
Posts: 1,605
Default

I would prefer to just get them off my shelf as is, but reliefs can be added for $150.

These are brand new, never used pistons with pins and rings.
__________________
But.....What do I know.

'04.5 EC/LB 4x4.
Howard Rods w/ oiler hole.
Oval Chambers and valve reliefs cut in Mahle Cast Pistons. 17.5:1
SoCal Stage 2 heads, 3388 Cam, Billet Flywheel, and harmonic balancer.
Danville 68mm VVT Turbo
100 over injectors.
PPE Dual CP3s
ProFab Castflow headers and uppipes.
100 PSIA MAP Sensor
Kennedy dual lift pump.

Dynoed 690 HP / 1200 TQ
  #14  
Old 03-29-2015, 07:14 AM
Fingers's Avatar
Fingers Fingers is offline
Village Idiot
 
Join Date: Apr 2008
Location: White Oak, PA
Posts: 1,605
Default

$1850 takes them and I'll include ground shipping to the lower 48.
$150 to add reliefs.
That's as low as I will go.
__________________
But.....What do I know.

'04.5 EC/LB 4x4.
Howard Rods w/ oiler hole.
Oval Chambers and valve reliefs cut in Mahle Cast Pistons. 17.5:1
SoCal Stage 2 heads, 3388 Cam, Billet Flywheel, and harmonic balancer.
Danville 68mm VVT Turbo
100 over injectors.
PPE Dual CP3s
ProFab Castflow headers and uppipes.
100 PSIA MAP Sensor
Kennedy dual lift pump.

Dynoed 690 HP / 1200 TQ
  #15  
Old 04-08-2015, 05:06 AM
Fingers's Avatar
Fingers Fingers is offline
Village Idiot
 
Join Date: Apr 2008
Location: White Oak, PA
Posts: 1,605
Default

Sold!!
__________________
But.....What do I know.

'04.5 EC/LB 4x4.
Howard Rods w/ oiler hole.
Oval Chambers and valve reliefs cut in Mahle Cast Pistons. 17.5:1
SoCal Stage 2 heads, 3388 Cam, Billet Flywheel, and harmonic balancer.
Danville 68mm VVT Turbo
100 over injectors.
PPE Dual CP3s
ProFab Castflow headers and uppipes.
100 PSIA MAP Sensor
Kennedy dual lift pump.

Dynoed 690 HP / 1200 TQ
Closed Thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 11:01 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vB.Sponsors