2008 GMC For Sale

[WVRigrat05]

I'm selling my 2008 GMC Sierra SLT so I can get in a newer long bed.
Truck has 83,240 miles and climbs daily


Truck options are
SLT package Summit white with black interior.
Z71 package, tow package obviously (no fifth wheel hitch) just wiring
6 disc Bose stereo (non nav)
Factory trailer brake controller
Sirius/XM
On star
10 way power and heated leather seats with full center consol
Rear entertainment (no DVD)
Steering wheel controls with audio mute
Digital dual climate control
Back up parking assist
Fog lights
Adjustable pedals
Home link system
Rear defrost
Factory color matched handles
Locking tailgate with torsion assist
Remote start
Factory tow mirrors

Extras (all front end parts installed in the last 2,000 miles except centerlink)
-PPEI EFI live w/dsp 5 built trans tunes-
30/90/120/150/230, egr, grid heater and DPF disabled, tow brake on all tunes.
-Big Dipper stage 4 trans w/Prescison ML converter (2300 stall I think?) 30k miles on build
-Added a GM power steering cooler
-MBRP 4" aluminized exhaust with dual wall 5" RBP tip
-3" diamond eye down pipe
-EGR blocked
-PCV rerouted
-Raptor 100 lift pump
-Resonator plugged (have resonator still if desired)
-Pac brake 4350 airbags (under frame style in place of bump stops) no controller have lines ran under license plate, didn't want to drill holes
-17x9 +20 offset fuel kranks
-35x12.50 cooper STT pro with 700 miles as of today with alignment done
-new driver side UCA with new ball joint
-rare parts g2 tie rods
-cognito 5" sway bar links
-straight centerlink
-HD idler and pitman arms
-Timken hub assy on driver side
-fab fours winch bumper, no guards, added d-rings and cut a 4"x15" hole and built an air dam to keep temps in check
-5% window tint
-new slide collar, shift fork and actuator in the front end
-(not installed yet) bolted motor mounts.
I think that's it, might have missed something.

I have receipts for almost everything done, may have them all. All work done is documented in the owners manual with mileage, date and engine hours.

Truck has had amsoil or Royal purple ran in it since 4200 miles, front and rear has fresh royal purple 75-90, been changed twice since new

Transfer has fresh mobile 1 5w-30 syn. Been changed twice so far.
Trans has a fresh spin on but has 30k on the fluid.

I have extra parts for the truck that can go with it.

---I'm asking 30,500 Call or text 304-five1six-2one53 for pics/info as service is poor for uploading pics online. High book is 32,900 low is 26,200.

Truck has some scratches on the driver fender and the pass side of the back bumper is dented.

[WVRigrat05]

Morning bump, found a super clean 2002 f-350 7.3l cclb with an aluminum flat bed and a 6 speed, would be better for a rig ride.

[lutzjk913]

Originally Posted by WVRigrat05

Morning bump, found a super clean 2002 f-350 7.3l cclb with an aluminum flat bed and a 6 speed, would be better for a rig ride.

How many miles?
How much?

[WVRigrat05]

Originally Posted by lutzjk913

How many miles?
How much?

Not sure yet. Going to go look at it hopefully today, it's in east canton

[WVRigrat05]

Bump

[WVRigrat05]

Bumping this up

[WVRigrat05]

Getting ready to clay bar it and wax it again, it'll be spotless after these next couple days.

[WVRigrat05]

Bumping this back up, truck will have new steering box, power steering pump and pitman arm by Wednesday, trans will be double drained and new internal and external filters this weekend.

[WVRigrat05]

Bump, just had the grille and bumper re painted black, new power steering pump and pitman arm, steering and brakes feel like a half ton, never had one steer this good, makes me like it again. may just have the fender done too. May be ordering a rear ranch hand.

Haven't been getting much interest in it, may just put a small lift kit on it and keep it.

[filetnrelease]

Glws

[WVRigrat05]

Scratch the grille.

Stripped the chrome off and had color matched it white, and the top peice, turned out nice, I'll have it on the truck this evening.

Also installed the bolted motor mount on driver side, both sides were good still so I just did the one side to stiffen it up, I have two more motor mounts that are bolted to go with it.

[WVRigrat05]

Pics of grille Being done

[WVRigrat05]

Grille is on

[WVRigrat05]

Another pic

[WVRigrat05]

Few under truck pics