Duramax Diesels Forum Truck of the Week
  #1  
Old 01-06-2017, 07:53 AM
RickDLance's Avatar
RickDLance RickDLance is offline
Vendor
 
Join Date: Feb 2007
Posts: 1,030
Default CastFlow Manifolds and Up Pipes Still on sale!!

After selling thousands of our manifolds to individuals and companies we have still only had 2 failures.

They are cast in Kansas and machined and built right here in our shop. They have undergone updates and improvements over the years and we believe they flow better then anyone else's.

They are also still on sale for $875.

https://profabperformance.com/jm2/in...folds-up-pipes
__________________
www.ProFabPerformance.com

If it doesn't say Made in USA then look the other way!!

We also handle S & B filters, Air Dog lift pumps, American Eagle wheels, and Kraftwerks Superchargers.

On my 20th Duramax & still Loving them!

Last edited by RickDLance; 01-08-2017 at 08:41 AM.
Reply With Quote
  #2  
Old 01-06-2017, 08:05 AM
dordtrecht5's Avatar
dordtrecht5 dordtrecht5 is offline
Regular Cabs Rock
 
Join Date: Jul 2009
Location: Wherever I am working
Posts: 886

Default

I'm gonna get a set of these when I'm able...December was hard on us. Hopefully they will be on sale then too.

Sent from my SM-N910V using Tapatalk
__________________
'06 LBZ RC/LB 4x4
EFI by TDT
Super High Flow EGR delete kit and Centerlink support by AllSeason
GMAX6 & ML-G HD
BT DieselWorks Lock-up
12.59 @ 105
SOLD

02 CCSB LB7 EFI Big tie rods/PacBrake bags/DVD Pioneer head unit Rockford Fosgate speakers/110-120voltAC inverter/Mastercraft MTR
Thanks go out to 770JOHNNYW and blk smoke lb7
International Association of Bridge, Structural, Reinforcing and Ornamental Ironworkers Local 21 Omaha, NE
United Steel Workers Local 1343 South Milwaukee, WI
Reply With Quote
  #3  
Old 01-31-2017, 03:53 PM
firechaser1141's Avatar
firechaser1141 firechaser1141 is offline
FNG
 
Join Date: Jan 2017
Posts: 14
Default

What's the difference between the castflow towflow and castflow extreme?


Sent from my iPhone using Tapatalk
Reply With Quote
  #4  
Old 01-31-2017, 05:34 PM
Noreaster's Avatar
Noreaster Noreaster is offline
Hotrodder

 
Join Date: Jun 2007
Location: Cape Cod,MA
Posts: 2,899

Default

Tow flows are up pipes for the factory manifolds
Cast flows are the manifolds & up pipes for the a turbo in the valley running a downpipe
Extremes are manifolds & up pipes for trucks not using the convention downpipe like twins or single with a hoodstack, PS up pipe matches the DS
__________________
02 GMC 2500HD RC/LB "No Shuckin Luck" Totaled 12.26 @ 109
Ridge Runner Diesel Performance, Big Dipper tranny, Profab Performance, Super Diesel, Creatures of the Night, AirDog, BD
02 GMC 2500HD EC/SB WCFab twins
Bay State Diesels
Reply With Quote
  #5  
Old 01-31-2017, 05:36 PM
CarolinaHD CarolinaHD is offline
Hotrodder
 
Join Date: Feb 2011
Location: Concord, NC
Posts: 722
Default

So the cast and tow flow are dented and the extreme are not?
__________________
Alex

LBZ CCSB 4x4
EFI Live
RDL Y-bridge
161,000 miles


2003 C&C lb7/zf6
275,000 miles
LBZ & 4x4 Conversion in progress...
Turned into a frame off restoration
Reply With Quote
  #6  
Old 01-31-2017, 06:45 PM
Noreaster's Avatar
Noreaster Noreaster is offline
Hotrodder

 
Join Date: Jun 2007
Location: Cape Cod,MA
Posts: 2,899

Default

Yes, we'll I suppose you could have Rick make some tow flows for twins with out the dent
__________________
02 GMC 2500HD RC/LB "No Shuckin Luck" Totaled 12.26 @ 109
Ridge Runner Diesel Performance, Big Dipper tranny, Profab Performance, Super Diesel, Creatures of the Night, AirDog, BD
02 GMC 2500HD EC/SB WCFab twins
Bay State Diesels
Reply With Quote
  #7  
Old 01-31-2017, 07:02 PM
firechaser1141's Avatar
firechaser1141 firechaser1141 is offline
FNG
 
Join Date: Jan 2017
Posts: 14
Default

Oh ok makes sense so the cast flows will only bolt up to his manifolds


Sent from my iPhone using Tapatalk
Reply With Quote
  #8  
Old 02-01-2017, 10:22 AM
RickDLance's Avatar
RickDLance RickDLance is offline
Vendor
 
Join Date: Feb 2007
Posts: 1,030
Default

That is correct. Also our Xtreme are not just "not dented" like some. We can do that if you want, but are Xtremes are as close to a mirror image of each other as we could get. That way the flow is more even from side to side.
__________________
www.ProFabPerformance.com

If it doesn't say Made in USA then look the other way!!

We also handle S & B filters, Air Dog lift pumps, American Eagle wheels, and Kraftwerks Superchargers.

On my 20th Duramax & still Loving them!

Last edited by RickDLance; 02-22-2017 at 06:42 AM.
Reply With Quote
  #9  
Old 02-01-2017, 11:20 AM
oscyjack's Avatar
oscyjack oscyjack is offline
Hotrodder
 
Join Date: May 2016
Location: Northeast
Posts: 672
Default

I want to get these so bad to install when the trans is built next week but I just can't swing the $875 at the same time

I know my dp is rubbing a bit and being able to position everything with the trans out would be good haha.
__________________
'08 LMM CCSB
Limitless trans
EFIlive - PPEI
Built front end
All the bolt ons
33x11.5 on 17x9 -12
HB/brake upgrades
Reply With Quote
  #10  
Old 02-22-2017, 02:38 AM
firechaser1141's Avatar
firechaser1141 firechaser1141 is offline
FNG
 
Join Date: Jan 2017
Posts: 14
Default

Rick, what's the difference in price on the castflow manifolds and up pipes coated vs non coated?


Sent from my iPhone using Tapatalk
Reply With Quote
  #11  
Old 02-22-2017, 04:58 AM
Hawk 40's Avatar
Hawk 40 Hawk 40 is offline
Hotrodder
 
Join Date: Oct 2014
Location: Sarasota
Posts: 166
Default

Quote:
Originally Posted by RickDLance View Post
After selling thousands of our manifolds to individuals and companies we have still only had 2 failures.

They are cast in Kansas and machined and built right here in our shop. They have undergone updates and improvements over the years and we believe they flow better then anyone else's.

They are also still on sale for $875.

https://profabperformance.com/jm2/in...folds-up-pipes
What would it take to cast a water cooled marine version?
I know the market is tiny right now but part of the reason is lack of after market support for marine accessories.
__________________
Warming the globe sixteen cylinders at a time
Reply With Quote
  #12  
Old 02-22-2017, 04:58 AM
Stingpuller's Avatar
Stingpuller Stingpuller is offline
The Pusher Man
 
Join Date: Jan 2007
Location: central Ohio
Posts: 2,103

Default Thanks Rick

I just ordered a set from Rick for the Cobra Duramax build. Great price and a very good product.
__________________
2007 GMC c4500 Regency Western Hauler 235" Powerflow Dragster Powerflow, Howards rods,Arias piston,Fleece custom daul CP3, Fleece custom 80mm single turbo, Fleece injectors, 9" rear end, SoCal Diesel, Hughes powerglide, Mike's Race Wiring, Fuelabs pump, Ny-trex nitrous, Isspro gauges and Hamilton Cams thanks Zach
Reply With Quote
  #13  
Old 02-22-2017, 06:12 AM
RickDLance's Avatar
RickDLance RickDLance is offline
Vendor
 
Join Date: Feb 2007
Posts: 1,030
Default

Quote:
Originally Posted by firechaser1141 View Post
Rick, what's the difference in price on the castflow manifolds and up pipes coated vs non coated?


Sent from my iPhone using Tapatalk
$140. The Cerecote we use is strictly for heat retention. We are currently only doing black.

Quote:
Originally Posted by Hawk 40 View Post
What would it take to cast a water cooled marine version?
I know the market is tiny right now but part of the reason is lack of after market support for marine accessories.
Working with some guys now on some. May not be cast yet. Will depend on demand.

Quote:
Originally Posted by Stingpuller View Post
I just ordered a set from Rick for the Cobra Duramax build. Great price and a very good product.
Thanks!!
__________________
www.ProFabPerformance.com

If it doesn't say Made in USA then look the other way!!

We also handle S & B filters, Air Dog lift pumps, American Eagle wheels, and Kraftwerks Superchargers.

On my 20th Duramax & still Loving them!
Reply With Quote
  #14  
Old 03-23-2017, 06:27 AM
RobsDmax's Avatar
RobsDmax RobsDmax is offline
Hotrodder
 
Join Date: Mar 2012
Location: Caledon, Ontario
Posts: 750
Default

Rick I cannot seem to get your website to open at all!! Is it just me? Lol.
__________________
2003 Chevy LB7 RC/LB
EFI By Kory

2003 Chevy LB7 CC/SB "Cheap Hooker"
EFI By Kory - S400 HSP Kit - 2.5" Billet Charger - 2.8" Puller

2008 GMC LMM CC/SB
EFI By Kory - Magnaflow Exhaust
Reply With Quote
  #15  
Old 03-23-2017, 07:34 AM
JoshH's Avatar
JoshH JoshH is offline
Daggum farm truck
 
Join Date: Feb 2007
Location: Texas!!!
Posts: 12,388

Default

Quote:
Originally Posted by RobsDmax View Post
Rick I cannot seem to get your website to open at all!! Is it just me? Lol.
It is working fine for me. https://profabperformance.com/jm2/
__________________
06 Silverado 4x4 CC/SB

06 Express 2500 Duramax Van "The Dumpster"


Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 07:12 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vB.Sponsors