Duramax Diesels Forum Truck of the Week
  #31  
Old 03-14-2017, 02:00 PM
malibu795's Avatar
malibu795 malibu795 is offline
misspeelleerr

 
Join Date: Apr 2007
Location: in the buckeye state
Posts: 7,087
Default

There is no emissions, abs, etc on either truck.
Dot doesn't care

The nose Electronic thing on the 99 FL60 was cruise control on the 3126 cat that was in it
__________________
Adam
mispeeling wrods n a thraed nere u
07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live 478k broke block
99 FL60 8.3 12v 13sp
Quote:
smooth seas never made a skillfull salior

Last edited by malibu795; 03-14-2017 at 02:36 PM.
Reply With Quote
  #32  
Old 03-15-2017, 06:50 PM
malibu795's Avatar
malibu795 malibu795 is offline
misspeelleerr

 
Join Date: Apr 2007
Location: in the buckeye state
Posts: 7,087
Default

Pump plate info.. no clue how to read that.. 160/180/215????l

Engine serial number is 44843226
Component part # s01-22436-000
275HP@1800rpm
11 timing

Is That enough info to figure out compression ratio, injector size? In frame options?

Once batteries where charged. Engine fires extremely quickly in 25 temp. no cold weather starting aid, does have block heater.. it work? IDK... wasn't used.

Logical reasoning... quick fire in cold weather means compression is good and fuel system is good.. throttle response is rather quick too....do plan on pulling injectors and doing a compression test.. what's spec?

The adapter from front cover to air compressor is broken.
Low coolant light is on.. haven't done system pressure test yet..Will be done prior to pulling the engine..

Oil looks recently changed. Does ~70psi at idle cold. What's spec?
Should be a data plate on the turbo right?

What's cooling system capacity and oil system capacity? Be good info to have when I go to drain them.
__________________
Adam
mispeeling wrods n a thraed nere u
07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live 478k broke block
99 FL60 8.3 12v 13sp
Quote:
smooth seas never made a skillfull salior
Reply With Quote
  #33  
Old 03-15-2017, 07:54 PM
WVRigrat05's Avatar
WVRigrat05 WVRigrat05 is offline
Wound for sound
 
Join Date: Jan 2011
Location: French Creek, West Virginia
Posts: 2,769

Default

Looks like a riddle to me, know anyone at Bosch?
__________________
Reger
05' Black Chevy CC/SB LT- Blackout Performance built motor/trans/tuning- Gone

The Blessed Hellride- 08' White GMC Sierra SLT CC/SB,
100k miles-FOR SALE/Waiting on a new motor

Wife's ride- 2016 Pearl white Legacy limited 3.6R

Rig ride/new DD-02' Black Eddie Bauer explorer 4.6, -180k, still sporting original trans, outlasted two Duramaxs.
Reply With Quote
  #34  
Old 03-15-2017, 11:08 PM
THEFERMANATOR's Avatar
THEFERMANATOR THEFERMANATOR is offline
LEGALLY INSANE
 
Join Date: Feb 2009
Location: ZEPHYRHILLS, FL
Posts: 3,444
Default

Iirc oil capacity is 6 gallons with filter(filter holds a gallon by itself). Believe I paid about $60 for the last 8.3l oil filter I bought, but watch out for bapa as they mark it way up over $100. They start well down to around 20 degrees, then they get smokey. The factory intake heater doesn't do much for them either if it has one. I've only messed with a few of them in motorhomes, and one that was a line truck for drilling and setting power poles. They're good engines in all honesty, but don't seem to like being turned up as much power wise as the 5.9l does. All the ones I've messed with were all pretty well limited by the small turbo(hx-40 in a t3 base), and in motorhomes, the afc is set so conservative they take forever to finally take off and go.
__________________
1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

Reply With Quote
  #35  
Old 03-16-2017, 07:07 AM
malibu795's Avatar
malibu795 malibu795 is offline
misspeelleerr

 
Join Date: Apr 2007
Location: in the buckeye state
Posts: 7,087
Default

I can most likely get filters much cheaper going through the company's account I'm leased too.. I get a Baldwin dmax oil filter for under $6.00 as an example.

I plan on sending the pump off to Columbus diesel have it gone through balance fuel plate, and adjust the AFC, along with clean check pop pressure on the injectors.

Turbo foot looks like T4 which I'm told is common on the class 7 trucks,
Supposed to in the 40s and less than 10mph wind vs 10-20 and 20mph winds last couple days be nicer to climb around.
__________________
Adam
mispeeling wrods n a thraed nere u
07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live 478k broke block
99 FL60 8.3 12v 13sp
Quote:
smooth seas never made a skillfull salior
Reply With Quote
  #36  
Old 03-16-2017, 07:23 AM
Chevy1925's Avatar
Chevy1925 Chevy1925 is offline
don't know sh!t about IFS

 
Join Date: Oct 2009
Location: Phoenix Az
Posts: 13,469

Default

if you have time, sign up and PM this fellow Roman9 on the board im on. He does these engines all the time and knows a shit ton about them.

http://www.glamisdunes.com/invision/...11460-romans9/
__________________
James

02 LL7 2500HD CC/LB dmax/alli "The Limo"

BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me.

best time to date: 12.39

motor died/bent rods = 3/11/11
back from the dead 7:04pm 4/9/2012

Limo is back in the garage, now driving a built chevy tracker
Tailgate Crew Member #4
Reply With Quote
  #37  
Old 03-16-2017, 08:09 AM
malibu795's Avatar
malibu795 malibu795 is offline
misspeelleerr

 
Join Date: Apr 2007
Location: in the buckeye state
Posts: 7,087
Default

Sent numbers to dan@ Columbus diesel..
Pump is a 12mm ~174kW/260hp delivery valves and caps are choke point ~$1500 to install/replaced DV and caps along with a GSK for 2400-2500rpm fuel limit.
Could open up injectors but not needed. To reach 450-500 range.. have more than need fuel and cut it back is the plan..

Found the adapter from timing cover to air compressor is broken. $190 from fyda Columbus was the quote.
__________________
Adam
mispeeling wrods n a thraed nere u
07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live 478k broke block
99 FL60 8.3 12v 13sp
Quote:
smooth seas never made a skillfull salior
Reply With Quote
  #38  
Old 03-16-2017, 08:12 AM
WVRigrat05's Avatar
WVRigrat05 WVRigrat05 is offline
Wound for sound
 
Join Date: Jan 2011
Location: French Creek, West Virginia
Posts: 2,769

Default

Quote:
Originally Posted by malibu795 View Post
Sent numbers to dan@ Columbus diesel..
Pump is a 12mm ~174kW/260hp delivery valves and caps are choke point ~$1500 to install/replaced DV and caps along with a GSK for 2400-2500rpm fuel limit.
Could open up injectors but not needed. To reach 450-500 range.. have more than need fuel and cut it back is the plan..

Found the adapter from timing cover to air compressor is broken. $190 from fyda Columbus was the quote.
So you got the pump of pumps then??
__________________
Reger
05' Black Chevy CC/SB LT- Blackout Performance built motor/trans/tuning- Gone

The Blessed Hellride- 08' White GMC Sierra SLT CC/SB,
100k miles-FOR SALE/Waiting on a new motor

Wife's ride- 2016 Pearl white Legacy limited 3.6R

Rig ride/new DD-02' Black Eddie Bauer explorer 4.6, -180k, still sporting original trans, outlasted two Duramaxs.
Reply With Quote
  #39  
Old 03-16-2017, 08:45 AM
malibu795's Avatar
malibu795 malibu795 is offline
misspeelleerr

 
Join Date: Apr 2007
Location: in the buckeye state
Posts: 7,087
Default

Quote:
Originally Posted by WVRigrat05 View Post
So you got the pump of pumps then??
Definitely a positive.. could have had a smaller pump that was basically maxed out stock
__________________
Adam
mispeeling wrods n a thraed nere u
07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live 478k broke block
99 FL60 8.3 12v 13sp
Quote:
smooth seas never made a skillfull salior
Reply With Quote
  #40  
Old 03-16-2017, 09:26 AM
malibu795's Avatar
malibu795 malibu795 is offline
misspeelleerr

 
Join Date: Apr 2007
Location: in the buckeye state
Posts: 7,087
Default

Ferm. Truck has a BD103 oil filter.. my cost with company discount $25.00 all has a really small fuel/water filter 33472(WIX) be swapping that out for same setup on my LMM with a BF1259/BF7587.. haven't pulled the coolant filter number yet..
Radiator is shot easy 50% of the fins on the rear side are gone,
Really want to get the engine up to temp before I pull it
__________________
Adam
mispeeling wrods n a thraed nere u
07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live 478k broke block
99 FL60 8.3 12v 13sp
Quote:
smooth seas never made a skillfull salior
Reply With Quote
  #41  
Old 03-16-2017, 07:22 PM
malibu795's Avatar
malibu795 malibu795 is offline
misspeelleerr

 
Join Date: Apr 2007
Location: in the buckeye state
Posts: 7,087
Default

For those that float multiple forums.
This is going over on compd I'll try to keep both updated
http://www.competitiondiesel.com/for...d.php?t=193539
__________________
Adam
mispeeling wrods n a thraed nere u
07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live 478k broke block
99 FL60 8.3 12v 13sp
Quote:
smooth seas never made a skillfull salior
Reply With Quote
  #42  
Old 03-16-2017, 09:00 PM
THEFERMANATOR's Avatar
THEFERMANATOR THEFERMANATOR is offline
LEGALLY INSANE
 
Join Date: Feb 2009
Location: ZEPHYRHILLS, FL
Posts: 3,444
Default

Napa hit me for over $80 for the last one, carquest was $55 iirc. I know they offerred that engine at 450hp for marine use, but I believe they kept the rpm's down low on them.
__________________
1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

Reply With Quote
  #43  
Old 05-14-2017, 10:39 AM
malibu795's Avatar
malibu795 malibu795 is offline
misspeelleerr

 
Join Date: Apr 2007
Location: in the buckeye state
Posts: 7,087
Default

Here's the 430hp 8.3

Been hunting for a double over drive 13sp. Since I have none for core I'll have to eat that as well.. seams going price for Reman 13sp is ~4000.00 pluses 2500 core
Low mileage used seams to be 2-3000 with 1-1500 core
Trans I'm looking for that share these ratios r
RTLO 12713A
RTLO 12913a
RTLO 14913a
RTLO 14713a

Need to pull axle shaft to find out spline count so I can get the gear set made with 3.07:1 gears
245/70/19.5(33") 3.07 gears and said gear ratio gives me cruising RPM @70 of 1500-2100 for top three gears.. plus be able to cruise 75-80 easily out west

Pull casting numbers off the hubs might be able to swap from 8-275 hub pilot to 10-275 hub pilot.
Truck came with 4 new 11r22.5 straight tread tires.. and two junk 255/70/22.5. kept the old double coin drives 225/70/19.5 I pulled off the LMM last winter..
Once I get the transmission bought I'll start tearing things apart..
__________________
Adam
mispeeling wrods n a thraed nere u
07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live 478k broke block
99 FL60 8.3 12v 13sp
Quote:
smooth seas never made a skillfull salior
Reply With Quote
  #44  
Old 05-19-2017, 03:53 PM
malibu795's Avatar
malibu795 malibu795 is offline
misspeelleerr

 
Join Date: Apr 2007
Location: in the buckeye state
Posts: 7,087
Default

Walking through local salvage yard found air ride front suspension hopefully it's still there when I get back..
Also be buying transmission shortly. RTLO 16913a.
__________________
Adam
mispeeling wrods n a thraed nere u
07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live 478k broke block
99 FL60 8.3 12v 13sp
Quote:
smooth seas never made a skillfull salior
Reply With Quote
  #45  
Old 05-19-2017, 06:06 PM
malibu795's Avatar
malibu795 malibu795 is offline
misspeelleerr

 
Join Date: Apr 2007
Location: in the buckeye state
Posts: 7,087
Default

Good Dale's is almost matching Vander haags price of $5250, with $5500 including yoke, a #2 bell housing ,forward control shift plate and shift tower..
2 year warranty unlimited miles.

Call frieghtliner run VIN, truck should have a 1710 or 5-675x half round..
1.938/6.094(3/32)
1 peice drive shaft
So verify
Pull u-joint on diff... Cleaned yoke ears of grease etc
Measurements
Cap...1.938"
Cross 6.1875-6.2187 or 3/16-7/32"
...****...
1760 is 1.938/7"
1810 is 1.938/7.547


Woohoo for little surprises!!!!
:bang:



Gues I need to see what I can get for pinion yoke for this RS145-120

So now convert everything to down to 1710 or up to 1760..based on what yoke I can get... either way drive shaft got alot more expensive
__________________
Adam
mispeeling wrods n a thraed nere u
07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live 478k broke block
99 FL60 8.3 12v 13sp
Quote:
smooth seas never made a skillfull salior

Last edited by malibu795; 05-19-2017 at 06:30 PM.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
boostwhore
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 10:33 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vB.Sponsors