Duramax Diesels Forum Truck of the Week
  #1  
Old 10-17-2017, 03:18 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default 01 Crew Cab S10 ZR2 SAS LB7 build...

Ive got a bunch of the parts n pieces already
The LB7 / Allison combo is from an 03 GMC 2500 HD 2wd Crew Cab... I will convert the trans to 4x4 & put the speedo sensor in the 4x4 adapter because Im gonna run doublers... 37in Hummer Baja Takeoffs on old school 16.5x9.75 slot mags... Axles will be a 78/79 Dana 60 high pinion kingpin & a 14 bolt rear out of a mid 80s Military K30 for the 4.56s & Detroit Locker... Its gettin 4 links at both ends & itll be on Air Bags
I figured I better post up because Im already needin info on Wiring!!! I wont be using the ABS Stuff soo I need to know what the connector pinouts are on the black 20pin... Theres a purple wire that came from the brake master cyl. To the 20pin & I need to know Where to Relocate that one... Then theres another purple & a black with white stripe wire... Both of those trace to the red block under the fuse panel thats under the hood... Other than this I dont see any big speed bumps because Im usin all the wiring from the Full Size & the Steering column too itll also get the HydroBoost brakes snd a Reseal Kit for that... The LB7 needs SAC 45s & a pinned water pump from the start... Soo IF Yall can help with ABS connector pinouts & any wiring diagrams so I can make the stuff workRight after the Delete Thanks In Advance!!!
Reply With Quote
  #2  
Old 10-17-2017, 03:39 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default


When I brought the S10 Crew Cab home

After collecting a few parts for the ZR2 conversion part of things... I have the ZR2 frame that Im modding too

My 2 ZR2 frames & another ZR2 bed for the Red Ext Cab later...

Some interior pics...
Reply With Quote
  #3  
Old 10-17-2017, 03:43 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default



How its settin now... Waitin on Me to finish the Frame!!!
Reply With Quote
  #4  
Old 10-17-2017, 03:50 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default




The 03 2500 HD Donor truck Got it for 1500 and have sold enough off it that the DuraMax & Allison are Free & Im +460 on it Still need to sell the rear axle & front suspension plus 3 doors...
Reply With Quote
  #5  
Old 10-17-2017, 04:09 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default



How the Donor sets today... Its got tarps coverin it though...
Reply With Quote
  #6  
Old 10-17-2017, 04:23 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default







Beginning of Frame Mods to Make more Room for the Dmax
Reply With Quote
  #7  
Old 10-17-2017, 04:30 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default




Reply With Quote
  #8  
Old 10-17-2017, 04:33 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default

Reply With Quote
  #9  
Old 10-17-2017, 04:39 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default

Reply With Quote
  #10  
Old 10-17-2017, 04:39 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default



The 16.5x9.75 rims
Reply With Quote
  #11  
Old 10-17-2017, 04:46 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default


And My Boost Valve off Ebay for like 9 bucks
Reply With Quote
  #12  
Old 10-17-2017, 04:50 AM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default

So any help with ABS wiring diagrams & connector pinouts is Appreciated!!!
Reply With Quote
  #13  
Old 10-17-2017, 05:30 AM
rcr1978's Avatar
rcr1978 rcr1978 is offline
Hotrodder
 
Join Date: Apr 2007
Location: Spring Creek, NV
Posts: 566
Default

Not to clutter your build thread but I might be interested in the steering knuckles, cross member under the pan, and part of the frame it bolts to from the Duramax. May not be worth the shipping cost to NV though.
__________________
04 LB7 ECSB Built motor, Wagler billet narrowed Rods, Callies billet crank, Mahle Race Cast pistons, Randy's Girdle, Wagler/Callies Stage 1 alterfire cam, Exergy 100% SAC's, dual CP3's, Randy's race ported heads, Profab cast flow/up pipes, and S475 over stock twins for now more later.
2010 LMM CCLB-Tuning/Exhaust
2015 LML Cab and chassis- Tuning/Exhaust
Reply With Quote
  #14  
Old 10-17-2017, 01:58 PM
warriorcustoms warriorcustoms is offline
FNG
 
Join Date: Oct 2017
Location: Leon OK
Posts: 24
Default

Sent You a PM I havent pulled the drivetrain yet but anything thatll Unbolt I will/can pull & ship... Gaurantee itll be cheaper that Yer local Junkyard LoL
Reply With Quote
  #15  
Old 10-18-2017, 09:03 AM
Burn Down's Avatar
Burn Down Burn Down is offline
Hotrodder
 
Join Date: Sep 2008
Location: Boise Idaho
Posts: 6,324

Default

Looks like a cool project. I need that bed for my new project truck.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 10:55 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vB.Sponsors