|
|
|
#1
07-11-2017, 08:19 PM
|
|||
|
|||
2005 lly sliping on the high end
I have a 2005 lly duramax with 320,xxx miles. I did just time the truck with ppei. I know especially with that kind of miles I'm going to start breaking stuff. My issue is kinda odd though. In stock the truck will not go into limp mode anything over it will but only in the high end usually 80mph+ sometimes if I slightly increase it will hold fine others it will instantly go into limp, I'm guessing it's the trans but is there anyway it could be something else in the drive line? Maybe the torque converter or anything? I don't want to throw a bunch of money just to find out there's more to it or it's in a different component. Thanks in advance
Sent from my SAMSUNG-SM-G891A using Tapatalk 
|
|
#3
07-11-2017, 09:16 PM
|
||||
|
||||
|
did you get a check engine light? it should have if it went into limp mode, what was the trans code?
p0735 is an incorrect gear ratio for 5th, ask me how i know.
__________________
2005 ECSB LLY
5'' exhuast ATP EFI Live Fass 150 big cat filter Built Trans w/SC1058 Bumpers built by me Grade C HG's w/studs Leveled 295/75/16 Toyo's
|
|
#4
07-11-2017, 09:29 PM
|
||||
|
||||
|
Time for a trans. It's about impossible to tell what's going on without seeing some kind of data
Sent from my iPhone using Tapatalk
__________________
Arek 2003 CCSB LT LB7 deleted Some cool stuff, some fast stuff, some slow stuff EFI by Kory Special thanks to Evan@Limitless  
|
|
#6
07-12-2017, 09:53 AM
|
||||
|
||||
|
Quote:
__________________
Quote:
02 LL7 2500HD CC/LB dmax/alli "The Limo" BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me.  best time to date: 12.39 motor died/bent rods = 3/11/11 back from the dead 7:04pm 4/9/2012 Limo is back in the garage, now driving a built chevy tracker  Tailgate Crew Member #4
|
|
#7
07-13-2017, 03:32 PM
|
|||
|
|||
|
P0700 and P0802 were the codes and I figured it was the trans but worth asking if anyone has had other experiences besides transmission
Sent from my SAMSUNG-SM-G891A using Tapatalk
|
|
#8
07-13-2017, 03:51 PM
|
||||
|
||||
|
Quote:
Nailed it Quote:
Get a better scanner and try again. There are more p07xx codes Sent from my iPhone using Tapatalk
__________________
Arek 2003 CCSB LT LB7 deleted Some cool stuff, some fast stuff, some slow stuff EFI by Kory Special thanks to Evan@Limitless
|
|
#10
07-13-2017, 04:21 PM
|
||||
|
||||
|
Quote:
Knew it lol
__________________
Quote:
02 LL7 2500HD CC/LB dmax/alli "The Limo" BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me. best time to date: 12.39 motor died/bent rods = 3/11/11 back from the dead 7:04pm 4/9/2012 Limo is back in the garage, now driving a built chevy tracker Tailgate Crew Member #4
|
|
#11
07-13-2017, 04:47 PM
|
|||
|
|||
|
That's what it says I'll try to use the auto cal next time it pops up
 Sent from my SAMSUNG-SM-G891A using Tapatalk
|
|
#12
07-13-2017, 07:31 PM
|
||||
|
||||
|
Quote:
__________________
Shop 714 870 7300 Cell 310 918 9678 Tuned by Idaho Rob.
|
|
#13
07-13-2017, 07:33 PM
|
||||
|
||||
|
Doesn't need to pop up the codes are still there
Sent from my iPhone using Tapatalk
__________________
Arek 2003 CCSB LT LB7 deleted Some cool stuff, some fast stuff, some slow stuff EFI by Kory Special thanks to Evan@Limitless
|
|
#14
07-17-2017, 02:40 PM
|
|||
|
|||
|
Pcm 0700 and Tcm 0746 is what I got this time and a unrelated glow plug code.
Sent from my SAMSUNG-SM-G891A using Tapatalk
|
|
#15
07-17-2017, 02:43 PM
|
||||
|
||||
|
Quote:
__________________
Shop 714 870 7300 Cell 310 918 9678 Tuned by Idaho Rob.
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
