Duramax Diesels Forum Truck of the Week
  #1711  
Old 09-01-2017, 06:48 PM
jlawles2 jlawles2 is offline
Hotrodder
 
Join Date: Jan 2010
Location: Danbury, TX
Posts: 683
Default

Yeah there is a lot of water to move in Houston. Stay safe dealing with all of this stuff. I know you treat all of the water like raw sewage to keep safe.
__________________
Silver Birch Metallic 2004.5 GMC K2500HD with 265/75's
Banks super scoop, tubing, intercooler, and cat back with the IQ on the Window (for now). BD driver side Exhaust manifold.
Airdog 150 on frame rail. Amsoil synthetics for lubrication, and dual Amsoil filters on the driver frame rail. PPE centrifuge install.
EGR blocked. PCV rerouted. Resonator blocked (reinstalled for looks). Bladerunner installed. Dead kitty by MBRP (front pipe) and down tube replaced with the MBRP (heat wrapped from the turbo down to the front pipe).
Performax Gauges by ISSPRO in pod over mirror and overhead console (console pod by PPE). Mike L Transmission.
----Looking to do an onboard air with a set of truck air horns. Want Nathan K5LA's but not in the budget at the moment.----

06 GMC CCSB 2WD LBZ SLT package. Traded for '17 Denali

17 Denali CCSB 2500 4WD Stone Blue with Cocoa/Dark Sand Interior
Reply With Quote
  #1712  
Old 09-02-2017, 06:25 AM
Dozerboy's Avatar
Dozerboy Dozerboy is online now
Hotrodder
 
Join Date: Jun 2009
Location: TX of course
Posts: 3,067

Default

Sewage... ya some people can't seem to wrap there head around the fact this isn't like pumping rainwater off job sites like we normally do.


Sent from my iPhone using Tapatalk
__________________

06 GMC 2500 CCSB SLT LBZ 4X4





These views expressed on this post are not my own, but rather randomly generated computer gibberish, and in no way should be used to judge the author's IQ or mental health.
Reply With Quote
  #1713  
Old 09-02-2017, 07:05 AM
WolfLLY's Avatar
WolfLLY WolfLLY is offline
Making Chips
 
Join Date: Nov 2006
Location: AL
Posts: 4,161

Default

Quote:
Originally Posted by zakkb787 View Post
Yeah. He's also an army guy so he's got that cocky yes sir no sir thing going on too. Pretty annoying lol so is 8.6 about right for a mildly built duramax?
No, a max effort tune/trans/lift pump truck will run 8.0s-8.1s easily. That's ccsb and assuming healthy fuel system.
__________________
LMM CCSB LTZ Z71. SoCal motor, s485/68r, 1078 Limitless converter, S&S 200s.


LB7 ECSB 4X4

Thanks to Evan@Limitless, Mark@Danville Performance, Josh Harris@Top Notch, and Corbin(crussel)
Reply With Quote
  #1714  
Old 09-18-2017, 07:14 AM
WolfLLY's Avatar
WolfLLY WolfLLY is offline
Making Chips
 
Join Date: Nov 2006
Location: AL
Posts: 4,161

Default

Truck parts


https://www.facebook.com/waid.wolfor...54824178315965
__________________
LMM CCSB LTZ Z71. SoCal motor, s485/68r, 1078 Limitless converter, S&S 200s.


LB7 ECSB 4X4

Thanks to Evan@Limitless, Mark@Danville Performance, Josh Harris@Top Notch, and Corbin(crussel)
Reply With Quote
  #1715  
Old 09-20-2017, 05:06 AM
DMAX Slim's Avatar
DMAX Slim DMAX Slim is offline
Making chips or sparks
 
Join Date: Jan 2016
Location: U.S.
Posts: 810
Default

Took this jack plate apart for a customer so he can replace the motor. He said he didn't have the right tools to take it apart. I figured out he didn't have a torch to heat the 1/2" stainless flat head bolts so the loctite would release, that's some good stuff!
Attached Images
File Type: jpg IMG_0454.JPG (117.1 KB, 58 views)
__________________
2003 CC/SB LB7 "The Ole Heifer"
1993 GMC Sonoma 4WD V6 D.D.
Jesus Is The Only Way!
2002 RC/LB LB7~~Sold~~


Reply With Quote
  #1716  
Old 09-20-2017, 05:06 AM
DMAX Slim's Avatar
DMAX Slim DMAX Slim is offline
Making chips or sparks
 
Join Date: Jan 2016
Location: U.S.
Posts: 810
Default

Quote:
Originally Posted by WolfLLY View Post
What you making there?
__________________
2003 CC/SB LB7 "The Ole Heifer"
1993 GMC Sonoma 4WD V6 D.D.
Jesus Is The Only Way!
2002 RC/LB LB7~~Sold~~


Reply With Quote
  #1717  
Old 09-20-2017, 08:03 AM
Chevy1925's Avatar
Chevy1925 Chevy1925 is offline
don't know sh!t about IFS

 
Join Date: Oct 2009
Location: Phoenix Az
Posts: 13,337

Default

Quote:
Originally Posted by DMAX Slim View Post
What you making there?
turboencabulator
__________________
James

02 LL7 2500HD CC/LB dmax/alli "The Limo"

BIG THANKS TO: Mike L, Steve, Trent, Guy, Dan, Ruben, Josh H, Scott, Brian and everyone else who has put a hand in to help me.

best time to date: 12.39

motor died/bent rods = 3/11/11
back from the dead 7:04pm 4/9/2012

Limo is back in the garage, now driving a built chevy tracker
Tailgate Crew Member #4
Reply With Quote
  #1718  
Old 09-20-2017, 11:48 AM
Novak's Avatar
Novak Novak is offline
SQUIRREL TRYN TO GET A NUT
 
Join Date: Jun 2015
Location: Cloud 9, IDAHO
Posts: 701

Default



Got this heap in my shop. Typical 47RH violently locking and unlocking. Already has the noise cancelling wire for the converter so I adjust the throttle cable for the trans shift and I'm gonna try that out next tonight. Little side cash never hurts!


Sent from my iPhone using Tapatalk
__________________
2008 LMM
4" MBRP TB AXLE DUMP, EFI IDAHO ROB, PPE RAIL PLUG, S&B AIR, PPE TRANS COOLER, FLEECE TRANS LINES, AIRDOGG 165, EDGE CTS, KRYPTONITE STEERING RODS AND KRYPTONITE IDLER, COGNITO STEREING BRACES, COGNITO DIFF MOUNT, BARS TURNED DOWN AND DROP SHACKLES ON REAR, ALL OTHER PM (REROUTES AND DELETES) PAINT PAINT PAINT

2004.5 LLY :SOLD
5" TB EXHAUST, FASS LIFT PUMP, PPE TUNE, PUMP RUB, MOUTHPIECE, PAINT PAINT AND PAINT
Reply With Quote
  #1719  
Old 09-20-2017, 06:05 PM
TheBac's Avatar
TheBac TheBac is offline
Why do I keep doing this?


 
Join Date: Apr 2008
Location: Mid Michigan
Posts: 10,635

Default

I SAW BUFFALO!!! UP CLOSE!!!

When I really think about it, I have a heck of an interesting route. Great people, great area.
__________________
Tom
"BBT" 2003 GMC CC/SB 4x4
12.14@111.15

"Flyin' Brick" 1999 Chevy 1500 RC/SB 2wd -- in progress
2014 Chevy Cruze Diesel -- the DD

Two wrongs dont make a right, but three rights do make a left.

Reality is a matter of perspective.

This forum isn't for the weak of heart.....or wallet.

From mufflerguy on yb,
"Lets build a race car they said. Itll be fun they said. I don't know who "they" are.........but they need a good punch in the face!"
Reply With Quote
  #1720  
Old 09-20-2017, 06:07 PM
TheBac's Avatar
TheBac TheBac is offline
Why do I keep doing this?


 
Join Date: Apr 2008
Location: Mid Michigan
Posts: 10,635

Default

Quote:
Originally Posted by WolfLLY View Post
Making your own billet Allison deep pan?
__________________
Tom
"BBT" 2003 GMC CC/SB 4x4
12.14@111.15

"Flyin' Brick" 1999 Chevy 1500 RC/SB 2wd -- in progress
2014 Chevy Cruze Diesel -- the DD

Two wrongs dont make a right, but three rights do make a left.

Reality is a matter of perspective.

This forum isn't for the weak of heart.....or wallet.

From mufflerguy on yb,
"Lets build a race car they said. Itll be fun they said. I don't know who "they" are.........but they need a good punch in the face!"
Reply With Quote
  #1721  
Old 09-20-2017, 07:31 PM
clrussell's Avatar
clrussell clrussell is offline
pro-procrastinator
 
Join Date: Sep 2013
Posts: 4,488
Default

Quote:
Originally Posted by Novak View Post


Got this heap in my shop. Typical 47RH violently locking and unlocking. Already has the noise cancelling wire for the converter so I adjust the throttle cable for the trans shift and I'm gonna try that out next tonight. Little side cash never hurts!


Sent from my iPhone using Tapatalk

Get ya a governor pressure solenoid and sensor and internal filter.

Very common crap on those
__________________
01 ext cab, 480 over billet ihi, trans with g converter, sac 45s, tap shift, lots of black, everything built by myself with help from some of the best in the buisness.

Thanks to everyone on this forum who has helped me and those whom I bought parts from.

Special thanks to Evan, James, Russell, Mark and all the others I'm forgetting.
Reply With Quote
  #1722  
Old 09-21-2017, 10:20 AM
malibu795's Avatar
malibu795 malibu795 is offline
misspeelleerr

 
Join Date: Apr 2007
Location: in the buckeye state
Posts: 7,047
Default

Things I miss about the sea an old job of mine
https://youtu.be/AHrCI9eSJGQ
__________________
Adam
mispeeling wrods n a thraed nere u
99 chevy 3500 HD 06 LBZ/4L85E sold
07.5 3500hd RCLB LMM GT4088R, 4.56 gears 225/70/19.5 efi live with 418k as of 3/27/17
Quote:
smooth seas never made a skillfull salior
Reply With Quote
  #1723  
Old 09-21-2017, 10:29 AM
Balindir's Avatar
Balindir Balindir is offline
Rod shortning in progress
 
Join Date: Jul 2012
Location: South Central, Pa
Posts: 365

Default

Got a quote from NASA today... never thought I would see this day. lol
Attached Images
File Type: png NASA.png (8.0 KB, 77 views)
__________________
-Travis

Moonshine | s475 | Suncoast | Airdog | Studs | Braces | Sleeves | Traction bars |
Reply With Quote
  #1724  
Old 09-21-2017, 02:20 PM
Dozerboy's Avatar
Dozerboy Dozerboy is online now
Hotrodder
 
Join Date: Jun 2009
Location: TX of course
Posts: 3,067

Default

Quote:
Originally Posted by malibu795 View Post
Things I miss about the sea an old job of mine
https://youtu.be/AHrCI9eSJGQ
Thanks for saring that with us land lovers. As beautiful as it was I ain't going out to sea.

Sent from my SAMSUNG-SM-G900A using Tapatalk
__________________

06 GMC 2500 CCSB SLT LBZ 4X4





These views expressed on this post are not my own, but rather randomly generated computer gibberish, and in no way should be used to judge the author's IQ or mental health.
Reply With Quote
  #1725  
Old 09-21-2017, 05:57 PM
TheBac's Avatar
TheBac TheBac is offline
Why do I keep doing this?


 
Join Date: Apr 2008
Location: Mid Michigan
Posts: 10,635

Default

OK, forget the exotic animals.....today I got a chance to check out a '63 Split Window Vette. Hol-ee shit.

Dark Blue, blue interior, white walls/pietins, 40,000ish miles....absolutely gorgeous car. The owner has had it 31 years.

I was so starry-eyed and amazed I forgot to take a damn pic. But it looked like this one:


Unbelievable.
__________________
Tom
"BBT" 2003 GMC CC/SB 4x4
12.14@111.15

"Flyin' Brick" 1999 Chevy 1500 RC/SB 2wd -- in progress
2014 Chevy Cruze Diesel -- the DD

Two wrongs dont make a right, but three rights do make a left.

Reality is a matter of perspective.

This forum isn't for the weak of heart.....or wallet.

From mufflerguy on yb,
"Lets build a race car they said. Itll be fun they said. I don't know who "they" are.........but they need a good punch in the face!"
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -7. The time now is 08:36 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vB.Sponsors