Duramax Diesels Forum Truck of the Week
  #1  
Old 06-26-2016, 08:16 PM
clrussell's Avatar
clrussell clrussell is offline
pro-procrastinator
 
Join Date: Sep 2013
Posts: 4,545
Default Project "I have a problem"

So as some of you have noticed im starting another truck "build"

Truck is an 01 ext cab 4x4 that has belonged to two other forum members previous to me and I had the opportunity to buy it so I did. Had no engine or trans.

Truck as I bought it


How it looked for Nathaniel


Plans aren't much right now other than to get it running and driving then slowly build it up more. I picked up a used short block for it and have been going through doing various things.

Truck has a lot of goodies already on it so I don't have to buy as much. It'll be used as a truck and daily driven, probably make some passes and hopefully look good when I'm done.

Plans as of now-
369sxe with .83 htt housing
Trans by me using Evans parts
Studs, fresh gaskets
30/45% inj
110 valve springs
New stock lbz pump/ maybe another later
Newer oil pump left over from previous owner
Welded water pump
Nice set of wheels
Cleaned up top and bottom
35% tint on ws, 5% everything else

I had a whole bunch of stuff to type up but I'm being lazy and don't want to at the moment so I'll post pics.

The sexy 369



I stole illusion cherry and decided to get pretty much everything I can coated.





Valve covers and I/c pipes go to powder next week.

Getting an htt pedalstal done up by Russell for me.



Can't wait to spend some time on this thing and get it running.

Going to sit down and hopefully order the rest of the parts tomorrow for the truck, I need odds and ends and to pick a converter.





Sent from my iPhone using Tapatalk
__________________
01 ext cab, Billet ihi, trans with g converter, sac 45s, tap shift, lots of black, everything built by myself with help from some of the best in the buisness.

Thanks to everyone on this forum who has helped me and those whom I bought parts from.

Special thanks to Evan, James, Russell, Mark and all the others I'm forgetting.

Last edited by clrussell; 06-26-2016 at 08:38 PM.
Reply With Quote
  #2  
Old 06-26-2016, 08:28 PM
DefiantArms's Avatar
DefiantArms DefiantArms is offline
Limp Mode Cowboy
 
Join Date: Jan 2016
Location: St. Augustine, FL
Posts: 759

Default

Looks Good Corbin did you decide on the name?
__________________
John
2005 Chevy 2500 LLY CCSB "Nyx"
5" Exhaust, , 20x10 AF Burnouts 305/55 BFG's
EFI Live By Mr. Idaho Rob

You are not a beautiful or unique snowflake, you are the same organic decaying matter as everything else.. -TD
Reply With Quote
  #3  
Old 06-26-2016, 08:33 PM
motoking_1990's Avatar
motoking_1990 motoking_1990 is offline
Hotrodder
 
Join Date: May 2011
Location: Terre Haute, IN
Posts: 1,926
Default

It's coming along nicely Corbin. Happy to see you back at it. Let's try to keep this one around maybe!??

Sent from my SM-N900V using Tapatalk
__________________
2014 Chevrolet Cruze 2.0TD Loaded- Stock

2002 LB7 ec/sb

AFE Stage-2 Intake, mbrp intercooler pipes, PPE Boost Valve, EFI Live by duramaxtuner, p&p ihi w/wetzel wheel, bigger style intake horn, gmax 5 with precision tq, 5" MBRP Exhaust,beans sump, fass lift pump, 40% sticks, DP modded lbz cp3, Fuel Maverick w/ Nitto 420S

More fast stuff to come

GO FAST OR GET PASSED
Reply With Quote
  #4  
Old 06-26-2016, 08:33 PM
clrussell's Avatar
clrussell clrussell is offline
pro-procrastinator
 
Join Date: Sep 2013
Posts: 4,545
Default

Quote:
Originally Posted by DefiantArms View Post
Looks Good Corbin did you decide on the name?


I have not.. Id call it the dirty wh*re but that might not go over well


Sent from my iPhone using Tapatalk
__________________
01 ext cab, Billet ihi, trans with g converter, sac 45s, tap shift, lots of black, everything built by myself with help from some of the best in the buisness.

Thanks to everyone on this forum who has helped me and those whom I bought parts from.

Special thanks to Evan, James, Russell, Mark and all the others I'm forgetting.
Reply With Quote
  #5  
Old 06-26-2016, 08:34 PM
clrussell's Avatar
clrussell clrussell is offline
pro-procrastinator
 
Join Date: Sep 2013
Posts: 4,545
Default

Quote:
Originally Posted by motoking_1990 View Post
It's coming along nicely Corbin. Happy to see you back at it. Let's try to keep this one around maybe!??

Sent from my SM-N900V using Tapatalk


That's my plan. I really like this truck and im building it how I want.


Sent from my iPhone using Tapatalk
__________________
01 ext cab, Billet ihi, trans with g converter, sac 45s, tap shift, lots of black, everything built by myself with help from some of the best in the buisness.

Thanks to everyone on this forum who has helped me and those whom I bought parts from.

Special thanks to Evan, James, Russell, Mark and all the others I'm forgetting.
Reply With Quote
  #6  
Old 06-26-2016, 08:36 PM
clrussell's Avatar
clrussell clrussell is offline
pro-procrastinator
 
Join Date: Sep 2013
Posts: 4,545
Default

Random pics from assembly process to this point.

Crank pin was sheared


Short block buttoned up waiting on heads



New studs, lml gaskets, head set just waiting on my valve springs I sent the wrong address on.




Sent from my iPhone using Tapatalk
__________________
01 ext cab, Billet ihi, trans with g converter, sac 45s, tap shift, lots of black, everything built by myself with help from some of the best in the buisness.

Thanks to everyone on this forum who has helped me and those whom I bought parts from.

Special thanks to Evan, James, Russell, Mark and all the others I'm forgetting.
Reply With Quote
  #7  
Old 06-26-2016, 08:37 PM
DefiantArms's Avatar
DefiantArms DefiantArms is offline
Limp Mode Cowboy
 
Join Date: Jan 2016
Location: St. Augustine, FL
Posts: 759

Default

Quote:
Originally Posted by clrussell View Post
I have not.. Id call it the dirty wh*re but that might not go over well


Sent from my iPhone using Tapatalk
I still think Jezebel would be a good one
__________________
John
2005 Chevy 2500 LLY CCSB "Nyx"
5" Exhaust, , 20x10 AF Burnouts 305/55 BFG's
EFI Live By Mr. Idaho Rob

You are not a beautiful or unique snowflake, you are the same organic decaying matter as everything else.. -TD
Reply With Quote
  #8  
Old 06-26-2016, 08:40 PM
clrussell's Avatar
clrussell clrussell is offline
pro-procrastinator
 
Join Date: Sep 2013
Posts: 4,545
Default

The "rimz" not going offset crazy like the last truck.

20x10 -24 flavor.



Still up in the air on tires it'll be a toyo I've decided. Might go 305/50 st2 or might go 285/55 at2 10ply..


Sent from my iPhone using Tapatalk
__________________
01 ext cab, Billet ihi, trans with g converter, sac 45s, tap shift, lots of black, everything built by myself with help from some of the best in the buisness.

Thanks to everyone on this forum who has helped me and those whom I bought parts from.

Special thanks to Evan, James, Russell, Mark and all the others I'm forgetting.
Reply With Quote
  #9  
Old 06-26-2016, 08:48 PM
motoking_1990's Avatar
motoking_1990 motoking_1990 is offline
Hotrodder
 
Join Date: May 2011
Location: Terre Haute, IN
Posts: 1,926
Default

Quote:
Originally Posted by clrussell View Post
The "rimz" not going offset crazy like the last truck.

20x10 -24 flavor.



Still up in the air on tires it'll be a toyo I've decided. Might go 305/50 st2 or might go 285/55 at2 10ply..


Sent from my iPhone using Tapatalk
Plan on a welded water pump?

Those -24s should also be a little more friendly with your fenders. Maybe not your wallet being AFs. Lol

Just don't name it "The Durty" man that erks me when people call it that. Makes me cringe. Dirty Wh*** is cleaver though. Miss might not like...or maybe she would. Names are overrated anyway. I usually call her a bi*** when something goes wrong lol

Sent from my SM-N900V using Tapatalk
__________________
2014 Chevrolet Cruze 2.0TD Loaded- Stock

2002 LB7 ec/sb

AFE Stage-2 Intake, mbrp intercooler pipes, PPE Boost Valve, EFI Live by duramaxtuner, p&p ihi w/wetzel wheel, bigger style intake horn, gmax 5 with precision tq, 5" MBRP Exhaust,beans sump, fass lift pump, 40% sticks, DP modded lbz cp3, Fuel Maverick w/ Nitto 420S

More fast stuff to come

GO FAST OR GET PASSED
Reply With Quote
  #10  
Old 06-26-2016, 08:51 PM
clrussell's Avatar
clrussell clrussell is offline
pro-procrastinator
 
Join Date: Sep 2013
Posts: 4,545
Default

Quote:
Originally Posted by motoking_1990 View Post
Plan on a welded water pump?

Those -24s should also be a little more friendly with your fenders. Maybe not your wallet being AFs. Lol

Just don't name it "The Durty" man that erks me when people call it that. Makes me cringe. Dirty Wh*** is cleaver though. Miss might not like...or maybe she would. Names are overrated anyway. I usually call her a bi*** when something goes wrong lol

Sent from my SM-N900V using Tapatalk


Well the truck came with a extremely low mile gm welded pump. So I'm going to run it until it takes a dump.

Yes I HATE durtymax... Or even dirty max... But I get to calling them all kinds of names



Sent from my iPhone using Tapatalk
__________________
01 ext cab, Billet ihi, trans with g converter, sac 45s, tap shift, lots of black, everything built by myself with help from some of the best in the buisness.

Thanks to everyone on this forum who has helped me and those whom I bought parts from.

Special thanks to Evan, James, Russell, Mark and all the others I'm forgetting.
Reply With Quote
  #11  
Old 06-26-2016, 09:55 PM
AJH's Avatar
AJH AJH is offline
Hotrodder
 
Join Date: Sep 2015
Location: Memphis TN
Posts: 242
Default

I like it!
__________________
Adam

2008 GMC RCLB 6.0/6l90e stock for now
Gone
2006 Chevy CCSB
Moonshine, Trans, Supporting mods
2005 Chevy RCLB
Ppe hot race,leveled, 35x12.50s on h2s
Reply With Quote
  #12  
Old 06-26-2016, 10:40 PM
elliottw's Avatar
elliottw elliottw is offline
Hotrodder
 
Join Date: Jan 2013
Location: ND
Posts: 381
Default

Subd
__________________
2009 LMM- DSP5 by ATP, supporting mods SOLD
2005 LLY- DSP5, built tranny, supporting mods SOLD
2007 LBZ- Moonshine DSP5, supporting mods
Reply With Quote
  #13  
Old 06-26-2016, 11:50 PM
Awenta's Avatar
Awenta Awenta is offline
Hotrodder
 
Join Date: Sep 2014
Location: CT
Posts: 4,032
Default

Rods>wheels

Almost there! Lookin good.

Sent from my SM-N910V using Tapatalk
__________________
Arek

2003 CCSB LT LB7 deleted

Some cool stuff, some fast stuff, some slow stuff
EFI by Kory

Special thanks to Evan@Limitless
Reply With Quote
  #14  
Old 06-27-2016, 01:50 AM
DefiantArms's Avatar
DefiantArms DefiantArms is offline
Limp Mode Cowboy
 
Join Date: Jan 2016
Location: St. Augustine, FL
Posts: 759

Default

Quote:
Originally Posted by Awenta View Post
Rods>wheels
Thought the same thing when I saw those wheels
__________________
John
2005 Chevy 2500 LLY CCSB "Nyx"
5" Exhaust, , 20x10 AF Burnouts 305/55 BFG's
EFI Live By Mr. Idaho Rob

You are not a beautiful or unique snowflake, you are the same organic decaying matter as everything else.. -TD
Reply With Quote
  #15  
Old 06-27-2016, 05:29 AM
clrussell's Avatar
clrussell clrussell is offline
pro-procrastinator
 
Join Date: Sep 2013
Posts: 4,545
Default

Quote:
Originally Posted by Awenta View Post
Rods>wheels

Almost there! Lookin good.

Sent from my SM-N910V using Tapatalk
Nah wheels are exciting
__________________
01 ext cab, Billet ihi, trans with g converter, sac 45s, tap shift, lots of black, everything built by myself with help from some of the best in the buisness.

Thanks to everyone on this forum who has helped me and those whom I bought parts from.

Special thanks to Evan, James, Russell, Mark and all the others I'm forgetting.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vB.Sponsors