Duramax Diesels Forum Truck of the Week
  #1  
Old 09-08-2010, 09:22 AM
04lly 04lly is offline
FNG
 
Join Date: Sep 2010
Location: scottsdale, AZ
Truck: 04 CC/2500hd
Engine: LLY
Transmission: Automatic
Posts: 7
Question 04 duramx leaking oil and knocking, please help

Hey my names geoff I have a 04 silverado 2500hd 6.6l lly, it has 120,000 miles on it. this past week i just got back from new mexico and i was pulling down my street and i noticed the truck was making a knocking noise when i let off the gas goin slow. but if i reved it up and went faster it would go away and sound fine. the next day i went out to look at it an started it up an it was still knocking, but if i raised the rpm's it would go away, and there was a trail of oil all down the bottom side of the truck that was coming from the flywheel cover i believe. I am just trying to see if anyone cal help me out with this i have no clue where to start. i scanned it and it threw a couple codes, they were p0299which i think is low boost, p0670 which is a glow plug control circuit an p0700 which im not sure what that one is i think just to tell the computer there is a problem if im wrong on any of these let me know. but if anyone has ideas or has had this happen before an could help me out i would appreciate it. i need my truck for work so i got to get this fixed soon.

thanks

Last edited by 04lly; 09-08-2010 at 09:24 AM.
Reply With Quote
  #2  
Old 09-08-2010, 02:52 PM
TrentNell's Avatar
TrentNell TrentNell is offline
Finally underway !!!!!
 
Join Date: Jul 2008
Location: slc tuah
Truck: 2001 duramax
Engine: 6.6 duramax lb7
Transmission: Automatic
Posts: 8,014

Default

Need some more info before we can help , what was the fuel rail pressure ? is there any smoke white or black ? fuel in the oil ? is it a LLY or LB7 ? 2004 is usually LB7 but a few 2004.5's were LLy's . post more omore info and we will see what we can come up with .
__________________
Trent Nell
01 DMAX 2500 HD = Extreme Prejudice -> EPR Triple turbo Kit, EPR Allison Transmission, Aria's Forded Pistons, Howards Xbeam Rods , Built Engine, Ported Heads , Stage 2 cam, and Gorilla Girdle all by Randy's Engine And Machine , PPE Dual CP3's with 120% stroker pump , DDP 47LMP Injectors , 2-BD Diesel 165 GPH lift pumps , Frozen Boost W/A Cooler , 4link with coil overs at every corner , and a bunch of stuff I am probably forgetting.

9.87 @ 143.56, DA=6550

www.extremeprejudiceracing.com

2001 GMC CC/LB "The tow rig" , EPR Triple Turbo's EPR Trans , EFI live , RDL Headers and mouth peice, 305/55 R20 Coopers , 5" exhaust .
Reply With Quote
  #3  
Old 09-08-2010, 03:18 PM
04lly 04lly is offline
FNG
 
Join Date: Sep 2010
Location: scottsdale, AZ
Truck: 04 CC/2500hd
Engine: LLY
Transmission: Automatic
Posts: 7
Default

is says lly in the post, but theres no white smoke just black, and ill have to get somethin to check the fuel rail pressure.
Reply With Quote
  #4  
Old 09-10-2010, 12:18 PM
04lly 04lly is offline
FNG
 
Join Date: Sep 2010
Location: scottsdale, AZ
Truck: 04 CC/2500hd
Engine: LLY
Transmission: Automatic
Posts: 7
Default

how much pressure should it be running?
Reply With Quote
  #5  
Old 09-10-2010, 12:49 PM
stacks04's Avatar
stacks04 stacks04 is offline
Hotrodder
 
Join Date: Nov 2007
Location: Terryville,Ct
Truck: 04 Chevy crew cab
Engine: duramax diesel 6.6
Transmission: Automatic
Posts: 800

Default

At idle around 5000psi or so or 30-40mpa. Other than the low rpm knock does it run okay at the same rpm? The fprv is common on the older trucks and will can increase fuel pressure to much but it usually is acompanied by a rough run condition.
__________________
2004 CHEVY CREW CAB
Reply With Quote
  #6  
Old 09-10-2010, 01:58 PM
DIESELMAFIAPER.LB7's Avatar
DIESELMAFIAPER.LB7 DIESELMAFIAPER.LB7 is offline
<-----

 
Join Date: Jan 2010
Location: idaho
Truck: CC/SB
Engine: LB7 injector eater!!
Transmission: Automatic
Posts: 4,577

Default

Sounds like a rear main leak if Its at the back on the trans is the oil way full? hows oil pressure? Also a GM tech 2 will let you watch rail pressure
__________________
2003 GMC CC/SB: carrillos, mahle race cast .020, Arp main and head studs, Hamilton valve springs, merchant-auto pushrods, screw in cups (thanks to scott!), dual cp3s stock & II 85% Over, PPE manifolds & up-pipes, Exergy 80% overs, Billet 66 & Batmo 80mm, some other custom stuff
12.17 @ 113 stock motor & 66 & 45% sticks

2012 mega cab 6.7: H&S MM MCC tuning, S&B, Arps studs, 4'' Turbo back, maxx flow intake horn+4'' boost tube 20'' BMF REPRS on 35'' toyo at II's
Reply With Quote
  #7  
Old 09-10-2010, 04:14 PM
04lly 04lly is offline
FNG
 
Join Date: Sep 2010
Location: scottsdale, AZ
Truck: 04 CC/2500hd
Engine: LLY
Transmission: Automatic
Posts: 7
Default

ya as soon as i raise the rpms the knock goes away and it runs fine, but as soon as it drops down to idle its a loud knock again. an i smelled the oil on the ground and it is transmission fluid, so i got a couple problems. i scanned it again and it is saying p0090 and u0105. ill get a video up in a bit so you guys can hear what it sounds like.
Reply With Quote
  #8  
Old 09-12-2010, 09:20 AM
05lly2500hd's Avatar
05lly2500hd 05lly2500hd is offline
(903)293-6026
 
Join Date: Feb 2008
Location: Texarkana, TX
Truck: CC/SB
Engine: LLY
Transmission: Automatic
Posts: 590

Default

Video?


Sent from my iPhone using Tapatalk
__________________
MAD AMERICAN DIESEL PERFORMANCE, LLC
Amsoil lubricants, S&B intakes, AFE, EFILive, MBRP, Suncoast, MPI twins, EFILive tunes and more...

website will be up soon...stay tuned..

(903)293-6026
Reply With Quote
  #9  
Old 09-20-2010, 05:52 PM
04lly 04lly is offline
FNG
 
Join Date: Sep 2010
Location: scottsdale, AZ
Truck: 04 CC/2500hd
Engine: LLY
Transmission: Automatic
Posts: 7
Default

sorry guys, got caught up doing some stuff lately, heres the video link its not the best video but if you turn it up you can hear the knock.

http://www.youtube.com/watch?v=AB8F7ofacKE
Reply With Quote
  #10  
Old 09-20-2010, 06:20 PM
jonathancasey19's Avatar
jonathancasey19 jonathancasey19 is offline
yepppp
 
Join Date: Sep 2008
Location: Morehead City, North Carolina
Truck: 2002 EC/SB
Engine: 6.6 Duramax
Transmission: Automatic
Posts: 1,030

Default

whoaaa that sounds horrible.... i hope someone on here can help you out. sry ab the bad luck
__________________
2002 LB7 ECSB Summit White
Gt4088r, 45% injectors, Stage III Stroker cp3, Cognito NTBD 4-6", EFI Live dsp5, Airdog 150, RDL's uppipes, SC IV w/1056, 6" stacks, Banks Ram Air w/scoop intake, all custom led lighting & quad morimoto HID's, x2 12" subs, pillar gauges, debadged, Cognito brace kit & HD tie rods, Bilstein 5100's, 35x12.50 m/t atz's w/ 20" chrome rockstars
12.67 @ 105 w/ stock fuel system
Reply With Quote
  #11  
Old 09-20-2010, 08:55 PM
05lly2500hd's Avatar
05lly2500hd 05lly2500hd is offline
(903)293-6026
 
Join Date: Feb 2008
Location: Texarkana, TX
Truck: CC/SB
Engine: LLY
Transmission: Automatic
Posts: 590

Default

OUCH! doesn't sound good...where you located? what's your oil pressure?
__________________
MAD AMERICAN DIESEL PERFORMANCE, LLC
Amsoil lubricants, S&B intakes, AFE, EFILive, MBRP, Suncoast, MPI twins, EFILive tunes and more...

website will be up soon...stay tuned..

(903)293-6026
Reply With Quote
  #12  
Old 09-20-2010, 09:13 PM
04lly 04lly is offline
FNG
 
Join Date: Sep 2010
Location: scottsdale, AZ
Truck: 04 CC/2500hd
Engine: LLY
Transmission: Automatic
Posts: 7
Default

ya i know im hoping. im in scottsdale arizona, and i believe it was about 30 psi at idle.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 08:44 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vB.Sponsors