Search results

Search the forum Search Articles
  1. wilsonck

    LLY Turbo Surprise

    Try checking with Dannville performance, maybe even if it isn't theirs, they could help you out.
  2. wilsonck

    Trans Temps

    I will check the radiator too when I pull all the lines off. I don't think the convertor is shedding lining, at least when I dropped the pan and changed the sump filter, there were no bits of anything in there. But, I know that my convertor has gone soft just like in another thread where...
  3. wilsonck

    Trans Temps

    CAT dr, did you find or do anything with your trans? my fluid level is fine. I am replacing my cooler with an Earl's cooler and will blow out all the lines to ensure there is no blockage. After that, I think my issue may be my converter.
  4. wilsonck

    Trans Temps

    Aklowrider, your temps seem to be what I think they should be normally. Also it does sound like you guys overfilled your buddies tranny. there are lots of threads where Mike L says that the Fluid level should be no higher than the middle of the hot grid ( low-high ) at 175 F or that the...
  5. wilsonck

    Trans Temps

    I am with you. I have seen the exact same thing with my truck this spring. Suncoast 3 in it for 4 years and this last month, it has been higher with up to 216F going down the highway for 1 hour.
  6. wilsonck

    Las Vegas Diesel Dyno Day

    Great job Dan! Thanks for the hat. I think I was the visitor from farthest away- Alberta, Canada. Good show Newly.
  7. wilsonck

    Wish you never built your motor?

    I did the max effort, stock turbo(444/960). Max effort wasn't in there for daily driving, but it had been tuned for 4 years with various tunes by reputable tuners. Then one day last summer on a tow tune, pulling the trailer back to storage yard, the engine let go.
  8. wilsonck

    Head gasket needed

    thanks, I will check with him in the morning.
  9. wilsonck

    Head gasket needed

    Would anyone have this head gasket in stock or in your garage? part number: 98040130 01-07, VIN 1, 2, 6 & D Wave-Stopper, Left Hand, 1.05MM Thick, Grade C, For Overbore 1.05 MM Grade C Thickness 106mm Bore Diameter Wave Stoper Technology OEM 98040130 For an LLY that was rebuilt.
  10. wilsonck

    Check this out!!

    great video Kelsie!
  11. wilsonck

    Oil cooling

    Are you guys putting in oil temp and oil pressure gauges or just a temp gauge and you are using EFI to log the oil pressure?
  12. wilsonck

    I think my time just ran out......

    Sorry to hear that Dale.. I know what it is like. At least I was close to home when mine went.
  13. wilsonck

    LLY: Limits of the LLY

    I just had to put a new engine in mine because I lost compression in #2. It had 180,000 km and had started with a diablo tune at 20,000km. Then a PPE at 80,000, then efi. I don't really know why it went, I was just pulling the camping trailer on a small tune and egt's never went over 1400 at...
  14. wilsonck

    Needed: LLY short or longblock

    Does anyone have a LLY engine that they are looking to sell? I lost cylinder #2. Let me know any possibilities. Located in Alberta.
  15. wilsonck

    Calgary Off-Road Trails

    There are 2 areas. One is waiporous by cochrane, the other is clean creek by bragg creek. Both will be busy this weekend being a long weekend.
  16. wilsonck

    Plastidip?

    I just sprayed my grill tonight with it. No you can't get it at home depot here unless maybe some of the bigger stores carry it. There is an importer here in Calgary called Industrial plastics and paints that carries it. They say that recently because of all the hype on youtube, it is...
  17. wilsonck

    big single question

    no I agree you want a big intake, but I am saying that maybe he didn't mention to the tuners that it was a 5" intake even though he said it was a bigger turbo. So how is the response now? Did changing the maf tables help?
  18. wilsonck

    LBZ: Injector bad, removal, replacement

    Use a screwdriver and gently pry under the hold down to get it to go up more. Once it goes up so high, the hold down will slide out
  19. wilsonck

    big single question

    overlooked or maybe you forgot to tell them about the 5" intake ;)
  20. wilsonck

    LLY: Oil leak

    I bet your problem is the oil cooler. I just had the same problem . Oil filter screws onto oil cooler and both oil and coolant goes through it.
Top Bottom