Duramax Diesels Forum

Duramax Diesels Forum (http://www.duramaxdiesels.com/forum/index.php)
-   Garage Sale (http://www.duramaxdiesels.com/forum/forumdisplay.php?f=15)
-   -   FS: Blocks, Billet Main Caps, Y Bridge (http://www.duramaxdiesels.com/forum/showthread.php?t=73410)

MAXX IT OUT 10-18-2016 08:31 AM

Blocks, Billet Main Caps, Y Bridge
 
I have planning on building a engine for a projects, but I haven't had time to get remotely close to finishing the vehicle. So some of the parts I have been saving, I would like to move them.
LB7/LLY Y Bridge, it has a 3.5 inch inlet with tabs that can keep your boost tube from blowing off. $150 Shipped
A set of No Limit MFG billet Main Caps, They came out of engine some valve issues that damaged a piston. $550 Shipped or $700 with the matching LLY block, it will need to be bored 20 Over.
A LB7 Block with stock main caps that needs to go 20 over as well. $250
LB7 crankshaft that could be sold with either block for a extra $200
LBZ/LMM rods 200 Shipped
I also have most for the rest of the parts to make complete engine minus the heads, turbo and injectors, So if anyone interested extras any of the above please let me know and we can put together a deal.

Slowmax 10-18-2016 09:44 AM

Sell the crank separate?

clrussell 10-18-2016 09:54 AM

Pic of the bridge?

MAXX IT OUT 10-18-2016 10:57 AM

1 Attachment(s)
Quote:

Originally Posted by Slowmax (Post 1028542)
Sell the crank separate?

I would prefer not to, but if both blocks go without, then I would consider it.

Quote:

Originally Posted by clrussell (Post 1028544)
Pic of the bridge?

Sorry, I tried posting them earlier but it wasn't loading them.

04jimc 10-18-2016 02:29 PM

Wehrli made the bridge:thumb:

MAXX IT OUT 10-18-2016 05:00 PM

Quote:

Originally Posted by 04jimc (Post 1028573)
Wehrli made the bridge:thumb:

Thanks for that, I couldn't remember if it was or wasn't, so I didn't want to false advertise it by accident. It is a nice piece, but its really only will work early with a remote mount single or wehrli's side mounted primary set up.

MAXX IT OUT 10-19-2016 02:21 PM

Bump, Someone needs to start a build, I have front and rear covers, oil pans, a bunch of other stuff that can make a build easy and quick without your truck being down for a long time.

MAXX IT OUT 10-29-2016 06:54 PM

Bump

MAXX IT OUT 12-28-2016 01:20 PM

Bumping this up and adding some more stuff
Set of LBZ intake runner, 60 Shipped
Complete LLY HP fuel system with sensor for 300 Shipped
LLY injector hold downs with bolts 60 Shipped
Stock S366 cover and wheel, it has a v band cut on to the cover with an adapter for 2.5 inch boot. 60 shipped
2001 and maybe 2002 ABS pump/Brake control module. 200 shipped
I also have the electric moter for the ABS pump. 60 Bucks Shipped

MAXX IT OUT 03-02-2017 11:25 AM

Bumping this up

Hambone 03-02-2017 11:29 AM

Just wondering who's y bridge that is?

04jimc 03-02-2017 12:41 PM

Quote:

Originally Posted by Hambone (Post 1053614)
Just wondering who's y bridge that is?

Werhli

Sent from my XT1585 using Tapatalk

duramaxzak 03-02-2017 03:15 PM

Still have LLY block with billet main caps?

MAXX IT OUT 03-02-2017 08:40 PM

Yes I do Zak.

MAXX IT OUT 09-18-2017 07:38 AM

Well its time to bump this up again and clean out the shop for a new set of injectors for my truck.
Werhli LB7/LLY Y Bridge, it has a 3.5 inch inlet with tabs that can keep your boost tube from blowing off. $150 Shipped
A set of No Limit MFG billet Main Caps, They came out of engine with valve issues that damaged a piston. $550 Shipped or $700 with the matching LLY block, it will need to be bored 20 Over.
A LB7 Block with stock main caps that needs to go 20 over as well. $250
LB7 crankshaft that could be sold with either block for a extra $200
LBZ/LMM rods $200 Shipped
LBZ intake runners-$70 Shipped
2004.5 Chevy 2500 ECSB 4WD frame only-$500
Front Axle from the frame above, was in a engine fire, not sure what shape its in-$250
3 inch in and out duel core Air to Water inter-cooler that hangs off your transmission cooler bracket-$400
I also have most for the rest of the parts to make complete engine minus the heads, turbo and injectors, So if anyone interested extras any of the above please let me know and we can put together a deal.


All times are GMT -7. The time now is 03:09 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vB.Sponsors