Recent content by toddster911

  1. T

    hello, I live in montreal and am looking for a good mechanic, used to go to see tom at his shop...

    hello, I live in montreal and am looking for a good mechanic, used to go to see tom at his shop, no longer, can you recommend someone? have a few funky problems. thanks, Todd
  2. T

    do you still have the intake box and tube....simple, I need from the 6.6 box on top middle to...

    do you still have the intake box and tube....simple, I need from the 6.6 box on top middle to the airbox/filter including the maf ...all the above was stolen from me, do you have this available...packageprice? thanks Todd
  3. T

    hello, to make a long story short I had my truck stolen and it was recovered.I need the intake...

    hello, to make a long story short I had my truck stolen and it was recovered.I need the intake tube and maf and an lly fuel injectir computer and harness if you have them shoot me a price please. thanks Todd
  4. T

    LB7 code 0090 trouble shooting and diagram needed

    Ran it last night, same symptoms. I used the original cause I had a fpr modifier took mine apart to check for scoring or jamming, all was good and compared it's resistance to the new one, same. He said in 5 years he has only ever changed 1 FPR, but modified a bunch with shims. does anyone...
  5. T

    loping lb7 with no tune???check engine lit--help

    please refer to update here: http://www.duramaxdiesels.com/forum/showthread.php?p=360342#post360342
  6. T

    LB7 code 0090 trouble shooting and diagram needed

    started a new thread as the other was going in the wrong direction, My loping and high pressure problem seems to be electrical. The fpr is good, no blockage and read 3.2 ohm's, same as a new one (tested)I would like to follow my wires to see if there is a break somewhere or trouble shoot...
  7. T

    loping lb7 with no tune???check engine lit--help

    update 2 decided the fpr is probably bad...removed it tonight....noticed that in the 3-t25 torx screws, only 2 were as tight as everyone said...70foot lbs or so, the bottom one was much easier to remove...also mentioning that someone played in here before I PURCHASED THE TRUCK. can a small...
  8. T

    loping lb7 with no tune???check engine lit--help

    update Ok, so 2 nights ago I put some lubricating fluid into the tank and ran it. that same night it was alittle smoother but still on the ruff side, had the mil light so it would cut out at 2000rpm. but pulled well(not as usual) till that rpm Stopped the truck and tried running it again...
  9. T

    loping lb7 with no tune???check engine lit--help

    to help with a few questions that were asked. She is bone stock, injectors done a year ago and no problems since (only oil changes done a month ago....not used much) ...till now, no tuner or perf program's ok threw some atf into the tank to help lube...seems to have run a little bit...
  10. T

    loping lb7 with no tune???check engine lit--help

    what are your thought's on lubimoly diesel purge in fuel filter and tank to loosen it up also read some interesting info on adding atf fluid to tank to loosen and lube up the fpr and save it.....thoughts? anybody have good/bad experience with this? or just change it up with an oregon fuel...
  11. T

    loping lb7 with no tune???check engine lit--help

    codes up..... just started it up and ran well but mil light still on....then what seems to be once it is warmed up...loping started again and it ran rough...sounded like a powerjoke:D ok buddy came over and we toyed with it a little...scaned with better scanner and p0088 fuel pressure too...
  12. T

    loping lb7 with no tune???check engine lit--help

    thanks for the responses, no smoke during loping. no oil in tank...maybe a small residue from when it needed the injectors changed 20k miles ago ...if I can call it that, not noticable really..but seems fine. (any tech method to check for sure?) have not changed the fuel filter in a while...
  13. T

    loping lb7 with no tune???check engine lit--help

    not sure if this is in the right place ...new here. I have a lb7 with 62000miles 6 speed manual dually, injectors done by stealership. never an issue till now....try and follow this, I ran the truck for 40 or so miles, no issues. stopped in my driveway for 20 or so minutes...
See more
Top Bottom